Question

In: Electrical Engineering

THESE ARE QUESTION FROM THE TOPIC VARIABLE LOAD ON POWER STATIONS FROM THE SUBJECT POWER SYSTEM...

THESE ARE QUESTION FROM THE TOPIC VARIABLE LOAD ON POWER STATIONS FROM THE SUBJECT POWER SYSTEM FUNDAMENTALS PLEASE DO THE QUESTIONS STEP BY STEP AND IN NEAT HAND WRITTING THE ANSWERS ARE GIVEN WITH THE QUESTIONS

1) A generating station has a connected load of 40 MW and a maximum demand of 20 MW : the units generated being 60 × 106. Calculate (i) the demand factor (ii) the load factor.

ANS [(i) 0·5 (ii) 34·25%]

2) A 100 MW powers stations delivers 100 MW for 2 hours, 50 MW for 8 hours and is shut down for the rest of each day. It is also shut down for maintenance for 60 days each year. Calculate its annual load factor.

ANS [21%]

3) A power station is to supply four regions of loads whose peak values are 10,000 kW, 5000 kW, 8000 kW and 7000 kW. The diversity factor of the load at the station is 1.5 and the average annual load factor is 60%. Calculate the maximum demand on the station and annual energy supplied from the station.

ANS [20,000 kW , 105.12x10^6kWh]

Solutions

Expert Solution

Note please re verify your answer of second question it is 25%

All the formulas i used are mentioned in answer images

I used peak demand in question no1 that is also same term as maximum demand

In question no 3 i convert the given power in MW

If you have any problem and quarry in above problem please ask in comments

Dnt forget to press thumbs up if you like answer

Thank you have a nice day


Related Solutions

THESE QUESTONS ARE FROM THE SUBJECT POWER SYSTEM FUNDAMENTALS AND FROM THE TOPIC ELECTRICAL DESIGN OF...
THESE QUESTONS ARE FROM THE SUBJECT POWER SYSTEM FUNDAMENTALS AND FROM THE TOPIC ELECTRICAL DESIGN OF OVER HEAD TRANSMISSION LINES AND MAKE SURE THAT YOUR ANSWER IS CORRECT Problem-4 Find the inductance per km per phase of a 3-phase overhead transmission line using 2 cm diameter conductor when these are placed at the corners of an equilateral triangle of side 4 meters. Problem-5 The three conductors of 3-phase overhead line are arranged in a horizontal plane with a spacing of...
THESE QUESTONS ARE FROM THE SUBJECT POWER SYSTEM FUNDAMENTALS AND FROM THE TOPIC ELECTRICAL DESIGN OF...
THESE QUESTONS ARE FROM THE SUBJECT POWER SYSTEM FUNDAMENTALS AND FROM THE TOPIC ELECTRICAL DESIGN OF OVER HEAD TRANSMISSION LINES AND MAKE SURE THAT YOUR ANSWER IS CORRECT Problem-1 A single phase transmission line has two parallel conductors 1·5 meters apart, the diameter of each conductor being 0·5 cm. Calculate line to neutral capacitance for a line 80 km long. Problem-2 A 200 km, 3-phase transmission line has its conductors placed at the corners of an equilateral triangle of 2·5...
THESE ARE THE QUESTIONS FROM THE SUBJECT POWER SYSTEM FUNDAMENTALS AND THE TOPIC IS MECHANICAL DESIGN...
THESE ARE THE QUESTIONS FROM THE SUBJECT POWER SYSTEM FUNDAMENTALS AND THE TOPIC IS MECHANICAL DESIGN OF OVER HEAD LINES AND THE ANSWERS ARE IN BRCKETS 1) Estimate the corona loss for a three-phase, 110 kV, 50 Hz, 150 km long transmission line consisting of three conductors each of 10 mm diameter and spaced 2·5 m apart in an equilateral triangle formation. The temperature of air is 30ºC and the atmospheric pressure is 750 mm of mercury. Take irregularity factor...
Types and function for power generating stations.
Types and function for power generating stations.
a.) Define constant power load (CPL) and constant voltage load (CVL). Are power electronics devices constant...
a.) Define constant power load (CPL) and constant voltage load (CVL). Are power electronics devices constant power loads? If so, explain why. b) How can Zener diodes work as voltage stabilizer? c) Mention the typical value of resistance (Ohm-m) and conductance (Siemens/meter) for conductors, semiconductors and insulators.
macroeconomic power point presentation 13 slides about a topic from this any topic
macroeconomic power point presentation 13 slides about a topic from this any topic
The complex power absorbed by a load is S= 850∠-25⁰. This means the load is ________...
The complex power absorbed by a load is S= 850∠-25⁰. This means the load is ________ and pf is___________(a) Inductive , lagging(b) Inductive, leading(c) Capacitive, lagging(d) Capacitive, leading The answer is D but why
A load draws between 100mA and 400mA at 6V. It is receiving power from an unregulated...
A load draws between 100mA and 400mA at 6V. It is receiving power from an unregulated DC power supply whose output voltage can vary between 8.5V and 12V. Design a Zener diode voltage regulator using a 6V Zener diode that regulates for diode currents greater than 4mA and has a maximum power rating of 6W. Show the circuit diagram for the completed design and specify the power rating for all components.
Hello dear, Subject name: Accounting Information System My question from the book: Most cybercrime is not...
Hello dear, Subject name: Accounting Information System My question from the book: Most cybercrime is not reported. Give as many reasons as you can why much of this crime is purposely downplayed. Do you consider these reasons valid? Please minimum of 150 words, I wish to get it clear so I can read it. Thank you very much
Explain 6 factors which may be considered in allocating power generation to different power stations for...
Explain 6 factors which may be considered in allocating power generation to different power stations for optimum operation
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT