This question is referring to a concrete beam with steel rebar reinforcement, For a simply supported...

This question is referring to a concrete beam with steel rebar reinforcement,

For a simply supported beam with width 10 inches and depth 14 inches design the steel to resist a maximum moment of 50 kip feet. span=15 feet. Concrete 4 ksi. steel is 60 ksi.

Solutions

Expert Solution

Ally Wells answered 1 year ago

Next > < Previous

Related Solutions

Consider a concrete beam in an interior environment as follows: a. The beam is simply supported...

Consider a concrete beam in an interior environment as follows: a. The beam is simply supported with a design span of 4.8 metres. b. The dead load in the beam is uniformly distributed. c. Dead load on the beam, in addition to its own weight, is 6.9 KN/m of which 75% is permanent (long term). d. The beam carries a single concentrated live load at mid-span of 70 KN. e. 20% of the live load is considered short term. f....

Please select the reinforcement spacing for the entire span of a simply supported beam on a...

Please select the reinforcement spacing for the entire span of a simply supported beam on a 22 ft span. Use the detailed method to calculate Vc. Do not use a shear envelope diagram use the regular shear force diagram. Use b = 16 in., d = 27 in., the main bending reinforcement consists of 4 #9 bars. The unfactored dead and live loads are 2.6 Kip/ft and 2.5 kip/ft, respectively, f’c = 4500 psi, and fy = 60,000 psi. Use...

2. A simply supported rectangular concrete beam is to be made from M21 concrete grade and...

2. A simply supported rectangular concrete beam is to be made from M21 concrete grade and reinforced with steel bar of 345 MPa yield strength. It carries a uniformly distributed load of 12.5 kN/m and has a span of 6 m. Design the beam, assuming that the shape factor is 0.4. The weight density of steel is 77 kN/m3 and that of concrete is 24 kN/m3.

Determine the nominal concrete cover for a simply supported beam with exposure condition XC4. The concrete...

Determine the nominal concrete cover for a simply supported beam with exposure condition XC4. The concrete strength is 25MPa, the diameter of tension reinforcement is 32mm, diameter of shear link is 10mm, design working life is 50 years and the quality control is normal.

. A simply supported reinforced concrete beam needs to be designed with the following details: Size...

. A simply supported reinforced concrete beam needs to be designed with the following details: Size of Beam: 350 mm x 450 mm. Effective length of Beam: 8 m. Dead Load excluding self-weight of Beam: 30.5 kN/m Reinforcement: 25 mm bars and 8 mm stirrups Effective cover to compression reinforcement: 30 mm i. Design the beam and find out the number of bars required. ii. Design the beam for shear. iii. Draw the detailing of beam. Live load = 8KN/m...

. A simply supported reinforced concrete beam needs to be designed with the following details: Size...

a)Use SBC 304 to design a simply supported rectangular RC beam with tension reinforcement only to...

a)Use SBC 304 to design a simply supported rectangular RC beam with tension reinforcement only to carry a service dead load of 18 kN/m (excluding beam’s self-weight) and service live load of 6 kN/m. The span of the beam is 7.5 m. Design data:Compressive strength of concrete, ?’?=25MPaYield strength of reinforcing steel, ??=420MPaConcrete cover 50mmSize of stirrups 10 mmSize of main reinforcement20mmMaximum size of aggregate 20 mm b)What is the maximum uniform live load (in kN/m) that the beam designed...

Determine the required shear reinforcing for a simply supported concrete beam 7 meters long with a...

Determine the required shear reinforcing for a simply supported concrete beam 7 meters long with a cross section of 500 millimeters in depth and a width of 380 millimeters. Use fc = 35 MPa fy = 400 MPa. The longitudinal steel uses one row of 25M bars. The specific live load is 29 kKn/m. The beam is not exposed.

Complete the bending design of a simply supported reinforced concrete beam with the following parameters: Service...

Complete the bending design of a simply supported reinforced concrete beam with the following parameters: Service loads are WD = 2.5 Kip/ft and WL = 1.5 Kip/ft, Span = 16 ft, f'c = 6,000 psi, fy = 40,000 psi, b = 12 in., cover to the center of the steel = 3 in. Assume phi = 0.9, but make sure that phi is actually 0.9 at the end. Find h by doubling the recommended minimum height for this beam and...

Using ACI codes. Design a simply supported one-way reinforcement concrete floor slab with a dimension of...

Using ACI codes. Design a simply supported one-way reinforcement concrete floor slab with a dimension of 10 ft x10 ft. Dead load = 2620 lb Live load= 28000 lb Use f'c = 3000 psi and fy = 60,000 psi. Reinforcement is number 8. a) Design a one wat slab using ACI code with Reinforcement and the distance of steel bars from one another. b) Design a slab without reinforcement with minimum thickness. Compare the load, concrete slab and a reinforced...

Subjects