Question

In: Mechanical Engineering

A syngas fuel consists of these following volumetric composition: 75% methane and 25% butane. The syngas...

A syngas fuel consists of these following volumetric composition: 75% methane and 25% butane. The syngas at 100 kg/hour and 25 C is mixed with 20% excess air at 30 C. Due to incomplete combustion mechanics, 10%v of the syngas carbon is partially oxidized and forms carbon monoxide.

If the products of combustion are at 600K, obtain the combustion heat transfer rate from the system.

Solutions

Expert Solution

samet mamat answered 2 years ago
Next > < Previous

Related Solutions

A syngas fuel consists of these following volumetric composition: 75% methane and 25% butane. The syngas...
A syngas fuel consists of these following volumetric composition: 75% methane and 25% butane. The syngas at 100 kg/hour and 25oC is mixed with 20% excess air at 30oC. Due to incomplete combustion mechanics, 10%v of the syngas carbon is partially oxidized and forms carbon monoxide. If the products of combustion are at 600K, obtain the combustion heat transfer rate from the system.
A fuel consists of 75% mol methane 25% mole of ethane enters an oven with 80%...
A fuel consists of 75% mol methane 25% mole of ethane enters an oven with 80% excess air at 30 degrees Celsius. If 8 x 10 ^ 5 kJ per kg mol of fuel is transferred as heat to the boiler tubes, at what temperatures do the combustion gases from the furnace come out? Assume combustion complete * The steps of the solution of the thermodynamics book edition 7 are not accepted. * Do the exercise step by step please....
Gaseous feed to the reactor composition 75% butane ( C3H8) and 25% hydrogen ( percent by...
Gaseous feed to the reactor composition 75% butane ( C3H8) and 25% hydrogen ( percent by volume) is burned in a reactor with 25% excess air. The percentage conversion of butane to CO2 95% and the balance to CO. Calculate the mole composition of the stack
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8) and 15% butene (C4H8) by...
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8) and 15% butene (C4H8) by volume. It is to be fed to the combustion chamber in 10% excess air at 25ºC, where it is completely burnt to carbon dioxide and water. The flue gases produced are to be used to generate 5 bar steam from water at 90ºC. (a) Determine the maximum flame temperature. (b) If 5% of the heat available for steam production is lost to the atmosphere,...
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8) and 15% butene (C4H8) by...
A fuel gas consists of 75% butane (C4H10), 10% propane (C3H8) and 15% butene (C4H8) by volume. It is to be fed to the combustion chamber in 10% excess air at 25ºC, where it is completely burnt to carbon dioxide and water. The flue gases produced are to be used to generate 5 bar steam from water at 90ºC. With the aid of the data at the end of the question, steam tables and the enthalpy table given in the...
A gaseous mixture consists of 75 percent methane and 25 percent ethane by mass. 28,000 m3...
A gaseous mixture consists of 75 percent methane and 25 percent ethane by mass. 28,000 m3 of this mixture is trapped in a geological formation as natural gas at 150°C and 14 MPa. This natural gas is pumped 2000 m to the surface. At the surface, the gas pressure is 140 kPa and its temperature is 90°C. Using Kay’s rule and the enthalpy-departure charts, calculate the work required to pump this gas.
A fuel consists of a mixture of gases the composition of which is CO -20%, C2H2...
A fuel consists of a mixture of gases the composition of which is CO -20%, C2H2 - 35%, H2 45 % by volume. Determine the stoichiometric air-to-fuel ratio by mass. (10.6)
Twenty kg of a fuel consisting of 50% methane, 25% ethane and 25% propane (by mass)...
Twenty kg of a fuel consisting of 50% methane, 25% ethane and 25% propane (by mass) is compressed to 180 atm and 100 degrees C. What is the compressed volume using Kay’s rule?
mixture of 75 mole% propane and the balance methane is burned with 25 % excess air....
mixture of 75 mole% propane and the balance methane is burned with 25 % excess air. Fractional conversion of 90% of propane and 85% of the methane are achieved; of the carbon that reacts, 95% reacts to form CO2 and the balance reacts to form CO. . 1- draw and completely label the flow chartfor the process including labels for all unknown flow rates. 2-calculate the molar flow rate os air to the reactor per mol of fuel fed to...
Consider the following balanced equation for the combustion of butane, a fuel often used in lighters....
Consider the following balanced equation for the combustion of butane, a fuel often used in lighters. 2C4H10(g)+13O2(g)→8CO2(g)+10H2O(g) Complete the following table, showing the appropriate masses of reactants and products. If the mass of a reactant is provided, fill in the mass of other reactants required to completely react with the given mass, as well as the mass of each product formed. If the mass of a product is provided, fill in the required masses of each reactant to make that...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT