mixture of 75 mole% propane and the balance methane is burned with 25 % excess air....

mixture of 75 mole% propane and the balance methane is burned with 25 % excess air. Fractional conversion of 90% of propane and 85% of the methane are achieved; of the carbon that reacts, 95% reacts to form CO2 and the balance reacts to form CO. .

1- draw and completely label the flow chartfor the process including labels for all unknown flow rates.

2-calculate the molar flow rate os air to the reactor per mol of fuel fed to the reactor.

3-calculate the composition in mol fractions of the gas leaving the reactor.

4-the amount of oxygen in the exit gas is (equal, more than,less than ) the amount of fuel combusted completly. Explain please!

Solutions

Expert Solution

queen_honey_blossom answered 1 year ago

Next > < Previous

Related Solutions

Propane is mixed with 20% excess air (propane air mixture is initially at 25 °C and...

Propane is mixed with 20% excess air (propane air mixture is initially at 25 °C and 2.0 atm) and combusted at atmospheric pressure. It is assumed that the heat transfer between the chamber and the surroundings is negligible. In addition, you may assume that heat capacities of the gases are constant and that the reaction proceeds to 100% conversion. (30 points) a) Determine the flame temperature of the burner. b) Determine the flame temperature if 25% of the heat generated...

Methane at 25°C is burned in a boiler furnace with 10.0% excess air. The air enters...

Methane at 25°C is burned in a boiler furnace with 10.0% excess air. The air enters the burner at a temperature of 100°C. Ninety percent of the methane fed is consumed; the product gas is analyzed and found to contain 10.0 mol CO2 per 1 mol of CO. The exhaust gases exit the furnace at 400°C. Calculate the rate of heat transferred from the furnace, given that a molar flow rate of 100 mol/s CH4 is fed to the furnace.

100 moles of a mixture containing 45.9 wt% methane and remainder propane are burned with 40%...

100 moles of a mixture containing 45.9 wt% methane and remainder propane are burned with 40% excess oxygen. There is 80% conversion of both methane and propane. Given MWs: CH4= 16, C3H8= 44, O2= 32, H2O = 18, CO2= 44 a) Balance the following reactions:____ CH4 + ____ O2 -->____ CO2+ ____ H2O ____ C3H8 + ____ O2--->____ CO2 + ____ H2O (I understand this and have it correct) b) How many moles of O2 must be supplied for 80%...

Propane burns with 15% excess air. Before the propane-air mixture enters the burner, air preheats from...

Propane burns with 15% excess air. Before the propane-air mixture enters the burner, air preheats from 32 F to 575 F. Determine the requirements of the preheater (BTU / h) if the amount of propane fed to the burner is 1.35x105 SCFH (standard cubic feet per hour) Note: In this case, take standard conditions in the natural gas industry, such as 60 F and 1 atm. Report: a) Flow diagram of the complete process and its table of material balance...

A mixture of propane and butane is burned with air. Partial analysis of the stack gas...

A mixture of propane and butane is burned with air. Partial analysis of the stack gas produces the following dry-basis volume percentages: 0.0527% C3H8, 0.0527% C4H10, 1.48% CO, and 7.12% CO2. The stack gas is at an absolute pressure of 780 mmHg and the dew point of the gas is 46.5 ˚C. Calculate the molar composition of the fuel.

Methane is completely burned with 30% excess air, with 20% of the carbon transforming to CO....

Methane is completely burned with 30% excess air, with 20% of the carbon transforming to CO. a) What is the molar composition of the stack gas on a dry basis? b) Estimate the partial pressure of the CO in the stack gas if the barometer read 750 mmHg.

5. A mixture of methane and air is capable of being ignited only if the mole...

5. A mixture of methane and air is capable of being ignited only if the mole percent of methane is between 5% and 15%. A mixture containing 14.0 mole% methane in air flowing at a rate of 600. kg/h is to be diluted with pure air to reduce the methane concentration to the lower flammability limit. Calculate the required flow rate of air in kmol/h and the percent by mass of oxygen in the product gas.

In a furnace, 76 lbs propane C3H8 are burned with 17.2% excess air for complete combustion....

In a furnace, 76 lbs propane C3H8 are burned with 17.2% excess air for complete combustion. What is the percent CO2 in combustion products? Round your answer to the one decimal place.

Methane is completely burned with 250% excess air during a steady flow combustion process. If the...

Methane is completely burned with 250% excess air during a steady flow combustion process. If the reactants and the products are kept at 25 ° C and 1 atmosphere and the water of the products exists in liquid form. Determined: to. The balanced equation b. Heat transfer (kJ / kmol) c. Adiabatic flame temperature (K)

Propanol is burned with excess air to produce a mixture of comstock gases. The burner feed...

Propanol is burned with excess air to produce a mixture of comstock gases. The burner feed consists of 600 kh / h of propanol and 8700 kg / h of air. It is found that the total conversion of propanol is 90%. 95% of the propanol is burned through the complete reaction and the rest through incomplete reaction. A. Determine the stoichiometry CH3CH2CH2OH+ _O2---> _CO2+ H20 CH3CH2CH2OH+_O2 ---> _CO2 +_H20 B. LImitint reagent. C. Excess reactive and %excess. D. The...

Subjects