Question

In: Other

A fuel consists of 75% mol methane 25% mole of ethane enters an oven with 80%...

A fuel consists of 75% mol methane 25% mole of ethane enters an oven with 80%
excess air at 30 degrees Celsius. If 8 x 10 ^ 5 kJ per kg mol of fuel is transferred as heat to the boiler tubes, at what temperatures do the combustion gases from the furnace come out? Assume combustion
complete

* The steps of the solution of the thermodynamics book edition 7 are not accepted.

* Do the exercise step by step please.

* With clear formulas to know where each number comes from (result).

Solutions

Expert Solution

Amanda K answered 2 years ago
Next > < Previous

Related Solutions

A gaseous mixture consists of 75 percent methane and 25 percent ethane by mass. 28,000 m3...
A gaseous mixture consists of 75 percent methane and 25 percent ethane by mass. 28,000 m3 of this mixture is trapped in a geological formation as natural gas at 150°C and 14 MPa. This natural gas is pumped 2000 m to the surface. At the surface, the gas pressure is 140 kPa and its temperature is 90°C. Using Kay’s rule and the enthalpy-departure charts, calculate the work required to pump this gas.
A syngas fuel consists of these following volumetric composition: 75% methane and 25% butane. The syngas...
A syngas fuel consists of these following volumetric composition: 75% methane and 25% butane. The syngas at 100 kg/hour and 25 C is mixed with 20% excess air at 30 C. Due to incomplete combustion mechanics, 10%v of the syngas carbon is partially oxidized and forms carbon monoxide. If the products of combustion are at 600K, obtain the combustion heat transfer rate from the system.
A syngas fuel consists of these following volumetric composition: 75% methane and 25% butane. The syngas...
A syngas fuel consists of these following volumetric composition: 75% methane and 25% butane. The syngas at 100 kg/hour and 25oC is mixed with 20% excess air at 30oC. Due to incomplete combustion mechanics, 10%v of the syngas carbon is partially oxidized and forms carbon monoxide. If the products of combustion are at 600K, obtain the combustion heat transfer rate from the system.
A fuel gas containing 75.0 mole% methane and the balance ethane is burned completely with 15.0...
A fuel gas containing 75.0 mole% methane and the balance ethane is burned completely with 15.0 % excess air. The stack gas leaves the furnace at 800.0 °C and is cooled to 450.0 °C in a waste-heat boiler, a heat exchanger in which heat lost by cooling gases is used to produce steam from liquid water for heating, power generation, or process applications. Taking as a basis of calculation 100.0 mol of the fuel gas fed to the furnace, calculate...
A fuel gas containing 75.0 mole% methane and the balance ethane is burned completely with 15.0...
A fuel gas containing 75.0 mole% methane and the balance ethane is burned completely with 15.0 % excess air. The stack gas leaves the furnace at 800.0 °C and is cooled to 450.0 °C in a waste-heat boiler, a heat exchanger in which heat lost by cooling gases is used to produce steam from liquid water for heating, power generation, or process applications. Taking as a basis of calculation 100.0 mol of the fuel gas fed to the furnace, calculate...
A fuel gas containing 85.0 mole% methane and the balance ethane is burned completely with 25.0...
A fuel gas containing 85.0 mole% methane and the balance ethane is burned completely with 25.0 % excess air. The stack gas leaves the furnace at 800.0 °C and is cooled to 350.0 °C in a waste-heat boiler, a heat exchanger in which heat lost by cooling gases is used to produce steam from liquid water for heating, power generation, or process applications. "A".Taking as a basis of calculation 100.0 mol of the fuel gas fed to the furnace, calculate...
Twenty kg of a fuel consisting of 50% methane, 25% ethane and 25% propane (by mass)...
Twenty kg of a fuel consisting of 50% methane, 25% ethane and 25% propane (by mass) is compressed to 180 atm and 100 degrees C. What is the compressed volume using Kay’s rule?
mixture of 75 mole% propane and the balance methane is burned with 25 % excess air....
mixture of 75 mole% propane and the balance methane is burned with 25 % excess air. Fractional conversion of 90% of propane and 85% of the methane are achieved; of the carbon that reacts, 95% reacts to form CO2 and the balance reacts to form CO. . 1- draw and completely label the flow chartfor the process including labels for all unknown flow rates. 2-calculate the molar flow rate os air to the reactor per mol of fuel fed to...
A fuel gas containing methane and ethane is burned with air in a furnace, producing a...
A fuel gas containing methane and ethane is burned with air in a furnace, producing a stack gas at 300.°C and 105 kPa (absolute). You analyze the stack gas and find that it contains no unburned hydrocarbons, oxygen, or carbon monoxide. You also determine the dew-point temperature. (a) Estimate the range of possible dew-point temperatures by determining the dew points when the feed is either pure methane or pure ethane. (b) Estimate the fraction of the feed that is methane...
A fuel gas containing methane and ethane is burned with air in a furnace, producing a...
A fuel gas containing methane and ethane is burned with air in a furnace, producing a stack gas at 300 ° C and 105 kPa (absolute). You analyze the stack gas and find that it contains no unburned hydrocarbons, oxygen, or carbon monoxide. You also determine the dew-point temperature. (a) Estimate the range of possible dew-point temperatures by determining the dew points when the feed is either pure methane or pure ethane. (b) Estimate the fraction of the feed that...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT