simply supported T-beam of 6 m clear span carries an ultimate load of 38 kN/m. The...

simply supported T-beam of 6 m clear span carries an ultimate load of 38 kN/m. The beam section dimensions, support particulars and tension reinforcement are shown in Figure Q1.

Design the shear reinforcement for the beam.

Data Given:

The characteristic strength of the concrete is 25 N/mm2.

The characteristic strength of steel reinforcement is 460N/mm2.

The characteristic strength of shear reinforcement is 250N/mm2.

Nominal maximum aggregate size (hagg) is 20 mm

Diameter of shear links is 8 mm

Exposure condition is mild

Minimum required fire resistance is 1.0 hour

Expert Solution

Ally Wells answered 8 months ago

A 6-m span simply supported beam carries a uniformly distributed ultimate load of 70 kN/m. The...

A 6-m span simply supported beam carries a uniformly distributed ultimate load of 70 kN/m. The dimensions of the beam section are b = 300 mm, d = 700 mm. The beam is reinforced with bars of 25-mm diameter in one row. f’c = 25 MPa, and Fy = 420 MPa. Use # 10 U-shaped stirrups. Neglect the column width. The stirrup spacings (s) is equal to: a. 450 mm b. 350 mm c. 400 mm d. 500 mm

A simply supported reinforced concrete beam with uniformly distributed load of 10 kN/m has a span...

A simply supported reinforced concrete beam with uniformly distributed load of 10 kN/m has a span of 6.0 metres. The beam cross-section is 225 mm breadth by 300 mm depth. Sketch and design the beam. Make necessary and realistic assumptions where applicable

A simply supported beam 10m long carries a uniform load of 24 kN/m. Using E =...

A simply supported beam 10m long carries a uniform load of 24 kN/m. Using E = 200 GPa, I = 240x10^6 mm4 Using CBM (conjugate beam method): A. Determine the rotation (in degrees) of the beam at a point 4m from the left support. B. Determine the deflection at a point 4m from the left support.

A simply supported beam of 10m span carries a uniformly distributed load of 50kN/m spread over...

A simply supported beam of 10m span carries a uniformly distributed load of 50kN/m spread over 5m from the left support and a 5kN concentrated load on its center . Its base is 250mm while deep is 500mm. Calculate the maximum deflection in mm. E = 2.0x10^5 N/mm2. Use the area moment method

Q1/ A simply supported isolated (T) beam have span length of (6m) subject to the ultimate...

Q1/ A simply supported isolated (T) beam have span length of (6m) subject to the ultimate design moment (Mu=705 kN.m) (including the moment from the self weight of the beam). Beam dimensions are: d=500mm, hf=125mm, bw=250mm, and b=500mm. for , find the steel reinforcement at the center of the beam and find the total depth (h) of the beam. (Use 010mm for shear reinforcement and 036mm for longitudinal reinforcement

A simply supported flanged beam subjected to a factored load of 60 kN/m (including dead load...

A simply supported flanged beam subjected to a factored load of 60 kN/m (including dead load and live load). The beam has an overall depth of 600 mm including slab thickness of 100 mm. The width of the beam is 230 mm, effective span of the beam is 6.25 m and effective cover to the tension reinforcement is 50 mm. Assume M25 grade concrete and Fe415 steel. Check whether the beam needs to be designed as singly reinforced or doubly...

A simply supported beam spans 35ft and carries a simply distrusted dead load of 0.2kip/ft including...

A simply supported beam spans 35ft and carries a simply distrusted dead load of 0.2kip/ft including the beam self-weight and live load of 0.8kip/ft. Determine the minimum required plastic section modulus and select the lightest-weight W-shape to carry the moment. Assume full lateral support and A992 steel. Design by (a) LRFD and (b) ASD

simply supported beam of length 8m carries UDL of 15N per meter for the entire span...

simply supported beam of length 8m carries UDL of 15N per meter for the entire span . also have point load of 4KN 1.5m from left support 7KN 2m from right support and 10 KN acting at the centre of beam . draw shear force snd bending moment diagram and calculate the maximum bending moment

A simply supported beam with a span of 26 FT is used to carry a service...

A simply supported beam with a span of 26 FT is used to carry a service dead load (including self-weight) of 1.65 KLF and a service live load of 3.3 KLF and is reinforced with 4-#9 bars. The beam has a width b of 14 IN, an effective depth of 24.5 IN., and a height of 27 IN. The material strengths are f’c = 4000 PSI and fy = 60 KSI. The immediate deflection due to live load is limited...

Please select the reinforcement spacing for the entire span of a simply supported beam on a...

Please select the reinforcement spacing for the entire span of a simply supported beam on a 22 ft span. Use the detailed method to calculate Vc. Do not use a shear envelope diagram use the regular shear force diagram. Use b = 16 in., d = 27 in., the main bending reinforcement consists of 4 #9 bars. The unfactored dead and live loads are 2.6 Kip/ft and 2.5 kip/ft, respectively, f’c = 4500 psi, and fy = 60,000 psi. Use...

Question