Question

In: Chemistry

Consider the titration of a 50.00 mL aliquot of a water sample containing Fe3++ and Pb2++...

Consider the titration of a 50.00 mL aliquot of a water sample containing Fe3++ and Pb2++ with 19.62 mL of 0.00243 M EDTA to reach the end point. Excess CN- was added to a separate 20.00 mL aliquot of the same water sample, causing Fe(CN)3 to precipitate. This aliquot was titrated with 2.01 mL of 0.00243 M EDTA to reach the end point. What is the molarity of Fe3+ in the water sample?

Please explain every step. Thank you.

Solutions

Expert Solution

queen_honey_blossom answered 2 years ago
Next > < Previous

Related Solutions

A sample containing acetaminophen was dissolved in water to make a 50.00-mL solution. The solution was...
A sample containing acetaminophen was dissolved in water to make a 50.00-mL solution. The solution was titrated with 0.5065 M NaOH, and the equivalence point was reached when 26.10 mL NaOH solution was added. The terminal hydrogen (on the OH) is removed during neutralization. The Ka value of acetaminophen is 3.2 × 10−10. Calculate the pH at the equivalence point.
A 10.00 mL sample of a solution containing Fe3+ and Co2+ are added to 100 mL...
A 10.00 mL sample of a solution containing Fe3+ and Co2+ are added to 100 mL of pH 4.5 buffer and then titrated to a Cu-PAN endpoint with 17.62 mL of 0.05106 M EDTA. A 25.00 mL sample of the same solution are added to 100 mL of pH 4.5 buffer and then 10 mL of 1 M potassium fluoride are added to mask the Fe3+. This solution was titrated to a Cu-PAN endpoint with 12.44 mL of 0.05106 M...
21.83 mL of a Pb2 solution, containing excess Pb2 , was added to 10.75 mL of...
21.83 mL of a Pb2 solution, containing excess Pb2 , was added to 10.75 mL of a 2,3-dimercapto-1-propanol (BAL) solution of unknown concentration, forming the 1:1 Pb2 –BAL complex. The excess Pb2 was titrated with 0.0141 M EDTA, requiring 8.86 mL to reach the equivalence point. Separately, 40.70 mL of the EDTA solution was required to titrate 31.00 mL of the Pb2 solution. Calculate the BAL concentration, in molarity, of the original 10.75-mL solution.
Consider the titration of 20 mL of 0.010 M V2+ with 0.010 M Fe3+ in 1...
Consider the titration of 20 mL of 0.010 M V2+ with 0.010 M Fe3+ in 1 M HCl using Pt and saturated calomel electrodes. Write a balanced titration reaction and the two half reactions for the indicator electrode. Calculate E at the following volumes of Fe3+ added: 1.00, 10.00, 20.00, and 30.00 mL
Consider the titration of 25.0 mL of 0.0500 M Sn2+ with 0.100 M Fe3+ in 1...
Consider the titration of 25.0 mL of 0.0500 M Sn2+ with 0.100 M Fe3+ in 1 M HCl to give Fe2+ and Sn4+, using a Pt and calomel electrodes. (a) write a balanced titration reaction (b) write two half-reactions fo the indicator electrode (c) write two Nerst equations for the cell voltage (d) calculate E at the following volumes of Fe3+: 1.0, 12.5, 24.0, 25.0, 26.0, and 30.0 mL. Sketch the titration curve.
Consider the titration of 50.0 mL of 0.0500 M Cu+ with 0.1000 M Fe3+ to give...
Consider the titration of 50.0 mL of 0.0500 M Cu+ with 0.1000 M Fe3+ to give Cu2+ and Fe2+ using Pt and standard H+/H2 reference electrode to find the end point. The standard electrode potentials are E0Cu+/Cu2+=0.161 V and E0Fe2+/Fe3+=0.767 V. Calculate the actual electrode potential, E, at the following volumes of Cu2+ (i) 15, (ii) 25, and (iii) 26 mL
Consider the titration of 50.00 mL of 0.200 M thioglycolic acid, H2SC2H2O2 (Ka1 = 2.3 x...
Consider the titration of 50.00 mL of 0.200 M thioglycolic acid, H2SC2H2O2 (Ka1 = 2.3 x 10 -4 and Ka2 = 2.5 x 10 -11) with 0.500 M NaOH and calculate the pH after the following volumes of NaOH have been added. a) 0.00 mL b) 7.00 mL c) 20.00 mL d) 32.00 mL e) 40.00 mL f) 43.00 mL
A 1.000-mL aliquot of a solution containing Cu2 and Ni2 is treated with 25.00 mL of...
A 1.000-mL aliquot of a solution containing Cu2 and Ni2 is treated with 25.00 mL of a 0.03742 M EDTA solution. The solution is then back titrated with 0.02190 M Zn2 solution at a pH of 5. A volume of 20.48 mL of the Zn2 solution was needed to reach the xylenol orange end point. A 2.000-mL aliquot of the Cu2 and Ni2 solution is fed through an ion-exchange column that retains Ni2 . The Cu2 that passed through the...
A 1.000-mL aliquot of a solution containing Cu2 and Ni2 is treated with 25.00 mL of...
A 1.000-mL aliquot of a solution containing Cu2 and Ni2 is treated with 25.00 mL of a 0.05893 M EDTA solution. The solution is then back titrated with 0.02306 M Zn2 solution at a pH of 5. A volume of 19.89 mL of the Zn2 solution was needed to reach the xylenol orange end point. A 2.000-mL aliquot of the Cu2 and Ni2 solution is fed through an ion-exchange column that retains Ni2 . The Cu2 that passed through the...
A 1.000-mL aliquot of a solution containing Cu2 and Ni2 is treated with 25.00 mL of...
A 1.000-mL aliquot of a solution containing Cu2 and Ni2 is treated with 25.00 mL of a 0.04503 M EDTA solution. The solution is then back titrated with 0.02327 M Zn2 solution at a pH of 5. A volume of 22.80 mL of the Zn2 solution was needed to reach the xylenol orange end point. A 2.000-mL aliquot of the Cu2 and Ni2 solution is fed through an ion-exchange column that retains Ni2 . The Cu2 that passed through the...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT