Silicon nitride (Si3N4) is made by combining elemental silicon
with nitrogen gas at a high temperature. a.) How many grams of
silicon are needed to react with an excess of nitrogen to prepare
150. grams of silicon nitride? b.) How many grams of nitrogen would
need to react? c.) If you determine that 0.950 moles of silicon
nitride were formed in this reaction, what would be the percent
yield? Give two possible explanations for why the percent yield
would be...
Electrical Conductivity Determination for Intrinsic
Silicon at 150°C Cakulate the electrical conductivity of intrinsic
silicon at 50 degrees * C C.100 100^ C 200^ C and plot the
conductivity that you have found versus temperature 300 degrees *
C
Liquid silicon tetrachloride reacts violently with liquid water
to product solid silicon dioxide and aqueous hydrochloric acid.
Write a balanced equation for this reaction.
If 76.5 g of water is mixed with 275 g of silicon tetrachloride
and the reaction goes to completion, how many grams of silicon
dioxide can be produced?
[97.3 g
SiO2]
How many grams of the nonlimiting (excess) reagent remain
unreacted when the reaction is over?
[18.2 g
H2O]
If the percent yield for the reaction...
A cast aluminium-silicon alloy containing 12 % silicon which
cannot be age hardened would normally solidify with a
hyper-eutectic structure. This alloy can be used for both
sandcasting and metal die-casting. Describe THREE methods in which
the cast metal can be strengthened by controlling the
microstructure during solidification.
1. Write a code that makes the MSP430 blink the red LED and the
green LED at the same time. The two LEDs should be on at the same
time and then off at the same time