Question

In: Civil Engineering

A body of water is being retained by a concrete dam wall (15 ft high and...

A body of water is being retained by a concrete dam wall (15 ft high and 6 ft thick). What is the maximum height the water can rise without causing the intensity of pressure at the toe greater than twice the average pressure on the base? Assume that concrete weighs 150 lbs per cubic foot, there is no seepage causing uplift against the bottom of the wall, and water weighs 62.5 lbs per cubic foot.

Solutions

Expert Solution

Given condition is should not be greater than .

e,eccentrcity=(b/2)-(Overturning moment about toe/Vertical force).

Over turning moment is taken as positive if moment is anticlockwise about toe.


Related Solutions

A 15 ft ladder leans against a wall. The bottom of the ladder is 3 ft...
A 15 ft ladder leans against a wall. The bottom of the ladder is 3 ft from the wall at time t=0 and slides away from the wall at a rate of 1 ft/sec. Find the velocity of the top of the ladder at time t=3. The velocity of the ladder at time t=3 is --ft/sec
The Deligne Dam on the Cayley River is built so that the wall facing the water...
The Deligne Dam on the Cayley River is built so that the wall facing the water is shaped like the region above the curve y = 0.5 x ^2 and below the line y = 280 . (Here, distances are measured in meters.) The water level is 34 meters below the top of the dam. Find the force (in Newtons) exerted on the dam by water pressure. (Water has a density of 1000 kg/ m^ 3 , and the acceleration...
A trapezoidal concrete dam (s = 2.4) 8.1m high and a horizontal base 10m long has...
A trapezoidal concrete dam (s = 2.4) 8.1m high and a horizontal base 10m long has a vertical upstream side. The downstream face is sloping 2-horizontal to 3-vertical. Water stands 7m on one side. Compute for the total weight of the dam. What is the overturning moment? Where will the resultant force cut the base from the toe?
Aferris wheel is 250 ft in diameter and us boarded from a platform 15 ft high....
Aferris wheel is 250 ft in diameter and us boarded from a platform 15 ft high. T=0 when the wheel is at uts maximum height. The wheel takes 5. mins to make 1 rotation. 1. graoh 1 period if the wheel 2. find a firmula for the height of the wheel as a function of time
1) A full rectangular water tank has a base of 10 ft x 15 ft and...
1) A full rectangular water tank has a base of 10 ft x 15 ft and is 20 ft high. What is the pressure at the bottom of the tank in a) PSI b) Pa 2) A cargo ship has a volume of 10,000 cubic meters. The total mass of the ship and cargo is 8 million kg. Will it sink or float at the surface of seawater having a density 1025 kg/m3? Why?
1) Design forms for 13’-8” high wall to be concreted at the rate of 5 ft...
1) Design forms for 13’-8” high wall to be concreted at the rate of 5 ft per hour, internally vibrated. Assume the mix is made with Type I cement, with no pozzolans or admixtures, and that the temperature of concrete at placing is 75°F. The unit weight of concrete is 150 pcf with a slump of 3.75 inches. The forms will be used only once, so short-term loading stresses will apply. Use form grade plywood sheathing 7/8 in. thick in...
A 17-ft-high retaining wall is restrained from yielding. The shear strenght parameters are c = 0...
A 17-ft-high retaining wall is restrained from yielding. The shear strenght parameters are c = 0 and φ33 The water table being 7 ft below the surface. The saturated unit weights of the rock is 122 lb/ft³, above the water table the (dry) unit weight of the rock is 104 lb/ft³. Assume that for OCR= 2. Calculate the lateral force Po per unit length of the wall. Also, determine the location of the resultant force.
In a vertical smooth wall 5m high, the water table is at 2m below the ground...
In a vertical smooth wall 5m high, the water table is at 2m below the ground surface. Calculate and draw the active lateral pressure using the following data: ydry = 15 ysat = 17. 5 0 = 34 ° above the water table ° 36 = j below the woter table Also, calculate the active thrust (Pa) and its location?
Consider a wall with the following dimensions: 120 feet long x 15 feet high x 9...
Consider a wall with the following dimensions: 120 feet long x 15 feet high x 9 inches thick. Also consider using a concrete pump with a capacity of 800 cubic feet per hour. Concrete mix consists of Type 1 concrete with retarder, and a unit weigh of 155 pcf. The maximum pressure applied on the wall form is approximately 2,200 psf. What is the rate of pour? What is the maximum temperature at which the concrete can be poured? Clearly...
Ammonia gas is being absorbed by water in a wetted-wall column. At one level of the column, the following data applies:
Ammonia gas is being absorbed by water in a wetted-wall column. At one level of the column, the following data applies: gas-phase mass transfer coefficient 5.22 × 10–9 kmol m–2 s–1 Pa–1 liquid-phase mass transfer coefficient 3.88 × 10–5 m s–1 Henry's constant 0.955 kPa (kmol m–3)–1. mole fraction of ammonia in liquid* 1.351 × 10–3 mole fraction of ammonia in gas* 0.065 total pressure of system 1.013 bar mole mass of ammonia 17 *Note: these values will need to be converted to concentrations in kmol m–3. (a) What is the partial pressure...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT