Two boxes are attached by a taut line that is threaded over a pulley of radius...

Two boxes are attached by a taut line that is threaded over a pulley of radius 13 cm and mass 100 g. The larger box has a mass of 849 g and lays on a level surface with friction coefficient 0.24. The smaller box has a mass of 341 g and sits on a frictionless incline of grade 0.82.

(a) What is the acceleration of the boxes?

(b) What is the maximum mass for the larger block so that it slides?

(c) If the pulley were massless, what would the acceleration of the boxes be?

(d) What is the maximum mass for the larger block so that it slides with the massless pulley?

Expert Solution

genius_generous answered 2 years ago

A compound wire is attached to a wall and hanging over a pulley with a mass...

A compound wire is attached to a wall and hanging over a pulley with a mass attached to the end and hanging down off of a table. The compound wire is made up of two different wires. The part attached to the wall is made of aluminum and has a length of 60 cm, a cross-sectional area of 1 × 10^-2 cm^2, and a density of 2.6 g/cm^3. The second part, which is a steel wire that has a density...

A block hangs from a string that runs over a pulley and is attached to a...

A block hangs from a string that runs over a pulley and is attached to a rolling cart. The cart, the block, and the pulley each have the same mass (M) . The cart an pulley roll without friction, and the pulley is a disk with moment of inertia: Icm=12MR2 The hanging block is released from rest and allowed to evolve freely under the influence of gravity. Find the speed of the hanging mass, v, after the block has fallen...

Two identical spring scales are each attached to a cord that is wrapped around a pulley,...

Two identical spring scales are each attached to a cord that is wrapped around a pulley, as shown in Figure 1. The two pulleys have identical mass MpMp and radius RpRp. However, Pulley AA is a solid disk, whereas Pulley BB has most of its mass located at its outer rim. Both pulleys can rotate about their centers with negligible friction in their axles. The pulleys are initially at rest when the two spring scales are pulled with the same...

Two blocks are connected by a light string that passes over a frictionless pulley as in...

Two blocks are connected by a light string that passes over a frictionless pulley as in the figure below. The system is released from rest while m2 is on the floor and m1 is a distance h above the floor. (a) Assuming m1 > m2, find an expression for the speed of m1 just as it reaches the floor. (Use any variable or symbol stated above along with the following as necessary: g.) vf = Incorrect: Your answer is incorrect....

Two blocks are connected by a light string that passes over a frictionless pulley having a...

Two blocks are connected by a light string that passes over a frictionless pulley having a moment of inertia of 0.0040 kg*m2 and a radius of 5.0 cm. The coefficient of kinetic friction between the table top and the upper block is 0.300. The blocks are released from rest. Using energy methods, find the speed of the upper block just as it has moved 0.600 m.

A string is wrapped around a pulley with a radius of 2.0 cm and no appreciable...

A string is wrapped around a pulley with a radius of 2.0 cm and no appreciable friction in its axle. The pulley is initially not turning. A constant force of 50 N is applied to the string, which does not slip, causing the pulley to rotate and the string to unwind. If the string unwinds 1.2 m in 4.9 s, what is the moment of inertia of the pulley?

Two masses are connected by a light string, which passes over a frictionless pulley as shown...

Two masses are connected by a light string, which passes over a frictionless pulley as shown in fig .3 on a the chalkboard. The inclined plane is rough. When m1=10kg , m2 = 3.0 kg and theta = 60degrees, the 10 kg mass moves down the inclined plane and accelerates down the nclined pane at a rate of 2.0m/s^2. Find a) the tension in the string. b)the coefficient of kinetic friction between the 10 kg mass and the inclined plane.

13. A Pulley shown in the illustration has a radius of 2.7 m and a moment...

13. A Pulley shown in the illustration has a radius of 2.7 m and a moment of inertia of 39.0 kg m^2. The hanging mass is 4.20 kg and it exerts a force tangent to the edge of the pulley. Another mass, 5.80 kg, hangs from the other end of the cord providing a counter torque. (A) What is the angular acceleration of the pulley? (B) What is the acceleration of the hanging mass? What is the tension is each...

A frictionless pulley, which can be modeled as a 0.90kg solid cylinder with a 0.31m radius

A frictionless pulley, which can be modeled as a 0.90kg solid cylinder with a 0.31m radius, has a rope going over it, as shown in the figure. The tensions in the rope are 12N and 10N. What is the angular acceleration of the pulley?

Suppose you have a system of two masses strung over a pulley. Mass 1 (6.2 kg)...

Suppose you have a system of two masses strung over a pulley. Mass 1 (6.2 kg) hangs on the right side of the pulley suspended over the ground at height 0.7 m. Mass 2 (2.3 kg) hangs over the left side of the pulley and rests on the ground. The pulley is a uniform disk of mass m and radius 12.5 cm. When the system is released, Mass 1 moves down and Mass 2 moves up, such that Mass 1...

Question