Flue gases from an incinerator are released to atmosphere using a stack that is 0.62 m...

Flue gases from an incinerator are released to atmosphere using a stack that is 0.62 m in diameter and 10.0 m high. The outer surface of the stack is at 45°C and the surrounding air is at 10°C. Determine the rate of heat transfer from the stack, assuming a. there is no wind and, b. the stack is exposed to 21 km/h winds.

Solutions

Expert Solution

samet mamat answered 6 months ago

Next > < Previous

Related Solutions

Assume the water for a boiler is preheated using flue gases from the boiler stack. The...

Assume the water for a boiler is preheated using flue gases from the boiler stack. The flue gases are available at a rate of 0.25 kg/s at 150°C, with a specific heat of 1000 J/kg · K. The water entering the exchanger at 15°C at the rate of 0.05 kg/s is to be heated to 90°C. The heat exchanger is to be of the type with one shell pass and four tube passes. The water flows inside the tubes, which...

Exhaust gases from a manufacturing plant are being discharged through a 10-m-tall exhaust stack with outer...

Exhaust gases from a manufacturing plant are being discharged through a 10-m-tall exhaust stack with outer diameter of 1.2 m. The exhaust gases are discharged at a rate of 1.2 kg/s, while temperature drop between inlet and exit of the exhaust stack is 30°C, and the constant pressure specific heat of the exhaust gasses is 1600 J/kg·K. On a particular day, wind at 27°C is blowing across the exhaust stack with a velocity of 10 m/s, while the outer surface...

Evaluate the proportion of the heat of fuel carried away by the flue gases for the...

Evaluate the proportion of the heat of fuel carried away by the flue gases for the following data: Coal with Calorific Value of 30 MJ/kg has composition by mass as follow: C= 78%, H=5%, 02,=8%, S=2%, N2=2% and the remaining is ash. The coal is burnt in the furnace with 50% excess air. The flue gases leaving the chimney at 327°C and the atmospheric temperature is at 15 °C. Assume perfect combustion. Specific heat for dry product (Cp) is 1045J/kg....

Evaluate the proportion of the heat of fuel carried away by the flue gases for the...

Evaluate the proportion of the heat of fuel carried away by the flue gases for the following data: Coal with Calorific Value of 30 MJ/kg has composition by mass as follow: C= 78%, H=5%, 0,=8%, S=2%, N2=2% and the remaining is ash. The coal is burnt in the furnace with 50% excess air. The flue gases leaving the chimney at 327°C and the atmospheric temperature is at 15 °C. Assume perfect combustion. Specific heat for dry product (Cp) is 1045J/kg....

Two gases X and Y are found in the atmosphere in only trace amounts because they...

Two gases X and Y are found in the atmosphere in only trace amounts because they decompose quickly. When exposed to ultraviolet light the half-life of X is 90.min, while that of Y is 0.50h. Suppose an atmospheric scientist studying these decompositions fills a transparent 10.0L flask with X and Y and exposes the flask to UV light. Initially, the partial pressure of X is 75.0% greater than the partial pressure of Y. As both gases decompose, will the partial...

(a) Dry saturated steam at a temperature of 180ºC is to be produced in a fire tube boiler from the cooling of 50 000 kg h–1 of flue gases from a pressurised combustion process.

(a) Dry saturated steam at a temperature of 180ºC is to be produced in a fire tube boiler from the cooling of 50 000 kg h–1 of flue gases from a pressurised combustion process. The gases enter the tubes of the boiler at 1600ºC and leave at 200ºC. The feed water is externally preheated to 180ºC before entering the boiler. The mean specific heat capacity of the flue gases is 1.15 kJ kg–1 K–1. The latent heat of vaporisation...

An electron is released from rest at a distance of 0.490 m from a large insulating...

An electron is released from rest at a distance of 0.490 m from a large insulating sheet of charge that has uniform surface charge density 3.70×10−12 C/ m 2 . 1-How much work is done on the electron by the electric field of the sheet as the electron moves from its initial position to a point 7.00×10−2 m from the sheet? W= Express your answer to three significant figures and include the appropriate units. 2-What is the speed of the...

A block of mass m = 3.50 kg is released from rest from point A and...

A block of mass m = 3.50 kg is released from rest from point A and slides on the frictionless track shown in the figure below. (Let ha = 5.20 m.) (a) Determine the block's speed at points B and C vB = m/s vC = m/s (b) Determine the net work done by the gravitational force on the block as it moves from point A to point C. J

A block of mass M = 4.0kg is released from rest at point A as shown....

A block of mass M = 4.0kg is released from rest at point A as shown. Part AB of the track is frictionless and is one quarter of a circle of radius R=1.25m. The horizontal part of the track BC is rough with co-efficient of kinetic friction . The block comes to rest at C after moving a distance L = 6.25m. The block can be treated as a point particle. [a] What is the speed (in m/s) of M...

A flat cushion of mass m is released from rest at the corner of the roof...

A flat cushion of mass m is released from rest at the corner of the roof of a building, at height h. A wind blowing along the side of the building exerts a constant horizontal force of magnitude F on the cushion as it drops as shown in the figure below. The air exerts no vertical force. (A) Show that the path of the cushion is a straight line. (Submit a file with a maximum size of 1 MB.) (B)...

Subjects