Question

In: Mechanical Engineering

Evaluate the proportion of the heat of fuel carried away by the flue gases for the...

Evaluate the proportion of the heat of fuel carried away by the flue gases for the following data: Coal with Calorific Value of 30 MJ/kg has composition by mass as follow: C= 78%, H=5%, 0,=8%, S=2%, N2=2% and the remaining is ash. The coal is burnt in the furnace with 50% excess air. The flue gases leaving the chimney at 327°C and the atmospheric temperature is at 15 °C. Assume perfect combustion. Specific heat for dry product (Cp) is 1045J/kg. Heat is carried away per kilogram of moisture in the flue gas is 3000kJ/kg. The composition of air by mass is as follow: 02 = 23% and N2= 77 %.
(20 marks, C5)

Solutions

Expert Solution

Please thumbs up to appreciate our efforts if you have any doubt regarding this question tell me I'll be delighted to help you.


Related Solutions

Evaluate the proportion of the heat of fuel carried away by the flue gases for the...
Evaluate the proportion of the heat of fuel carried away by the flue gases for the following data: Coal with Calorific Value of 30 MJ/kg has composition by mass as follow: C= 78%, H=5%, 02,=8%, S=2%, N2=2% and the remaining is ash. The coal is burnt in the furnace with 50% excess air. The flue gases leaving the chimney at 327°C and the atmospheric temperature is at 15 °C. Assume perfect combustion. Specific heat for dry product (Cp) is 1045J/kg....
Assume the water for a boiler is preheated using flue gases from the boiler stack. The...
Assume the water for a boiler is preheated using flue gases from the boiler stack. The flue gases are available at a rate of 0.25 kg/s at 150°C, with a specific heat of 1000 J/kg · K. The water entering the exchanger at 15°C at the rate of 0.05 kg/s is to be heated to 90°C. The heat exchanger is to be of the type with one shell pass and four tube passes. The water flows inside the tubes, which...
Flue gases from an incinerator are released to atmosphere using a stack that is 0.62 m...
Flue gases from an incinerator are released to atmosphere using a stack that is 0.62 m in diameter and 10.0 m high. The outer surface of the stack is at 45°C and the surrounding air is at 10°C. Determine the rate of heat transfer from the stack, assuming a. there is no wind and, b. the stack is exposed to 21 km/h winds.
A rocket turbine is driven by gases having specific heat ratio of 1.3 and specific heat...
A rocket turbine is driven by gases having specific heat ratio of 1.3 and specific heat of 1070 J/kg-K. The turbine entry stagnation conditions are 810 K and 2 MPa. If the discharge pressure from the turbine is 0.14 MPa, calculate its specific work. hts = 0.70.                  {Ans.: 2.78 (105) J/kg}
A fuel consists of a mixture of gases the composition of which is CO -20%, C2H2...
A fuel consists of a mixture of gases the composition of which is CO -20%, C2H2 - 35%, H2 45 % by volume. Determine the stoichiometric air-to-fuel ratio by mass. (10.6)
A combustion process consumes 1.25 g/s of fuel. The fuel has a heat of combustion of...
A combustion process consumes 1.25 g/s of fuel. The fuel has a heat of combustion of 45 MJ/kg. The air flow rate is 19 g/s and the air enters the engine at 300 K, 1 atm. Determine: (1) The outlet temperature of the air. (2) The air-fuel ratio (3) The heat added to the air. * Assume the cold-air standard model applies.
assuming that linear heat rate, fuel outside temperature and outside diameter for a solid fuel pellet...
assuming that linear heat rate, fuel outside temperature and outside diameter for a solid fuel pellet and an annular fuel pellet are the same, how does the maximum temperature compare between the two pellet? Why? assuming that linear heat rate, fuel outside temperature and outside diameter for a solid fuel pellet and an annular fuel pellet are the same, how does the maximum temperature compare between the two pellet? Why?
Hydrogen fuel has been used in fuel cells or internal combustion engines. Determine the heat of...
Hydrogen fuel has been used in fuel cells or internal combustion engines. Determine the heat of combustion, energy capacity, and carbon footprint of the fuel. ΔHf H2O(l) = -285.8 kJ/mol
Why different gases have different heat capacity ratio values?
Why different gases have different heat capacity ratio values?
Name and briefly explain different heat treatment operations carried on steels.
Name and briefly explain different heat treatment operations carried on steels.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT