A long, fine wire is wound into a coil with inductance 5 mH. The coil is...

A long, fine wire is wound into a coil with inductance 5 mH. The coil is connected across the terminals of a battery, and the current is measured a few seconds after the connection is made. The wire is unwound and wound again into a different coil with L = 10 mH. This second coil is connected across the same battery, and the current is measured in the same way. Compared with the current in the first coil, is the current in the second coil. ( Select all of them that applies)

A- Twice as large

B- One-Fourth as large

C- Uncharged

D- Half as large

E- Four times as large

Expert Solution

genius_generous answered 2 years ago

A coil of inductance 120 mH and unknown resistance and a 1.0 μF capacitor are connected...

A coil of inductance 120 mH and unknown resistance and a 1.0 μF capacitor are connected in series with an alternating emf of frequency 950 Hz. If the phase constant between the applied voltage and the current is 78°, what is the resistance of the coil?

A solenoidal coil with 23 turns of wire is wound tightly around another coil with 350...

A solenoidal coil with 23 turns of wire is wound tightly around another coil with 350 turns. The inner solenoid is 25.0 cm long and has a diameter of 2.40 cm . At a certain time, the current in the inner solenoid is 0.120 A and is increasing at a rate of 1600 A/s A)For this time, calculate the average magnetic flux through each turn of the inner solenoid. Express your answer in webers. B)For this time, calculate the mutual...

A solenoidal coil with 30 turns of wire is wound tightly around another coil with 310...

A solenoidal coil with 30 turns of wire is wound tightly around another coil with 310 turns. The inner solenoid is 20.0 cm long and has a diameter of 2.50 cm . At a certain time, the current in the inner solenoid is 0.150 A and is increasing at a rate of 1700 A/s . Part A For this time, calculate the average magnetic flux through each turn of the inner solenoid. Part B For this time, calculate the...

A solenoidal coil with 28 turns of wire is wound tightly around another coil with 320...

A solenoidal coil with 28 turns of wire is wound tightly around another coil with 320 turns. The inner solenoid is 21.0cm long and has a diameter of 2.20cm . At a certain time, the current in the inner solenoid is 0.150Aand is increasing at a rate of 1600A/s Part A For this time, calculate the average magnetic flux through each turn of the inner solenoid. Part B For this time, calculate the mutual inductance of the two solenoids; Part...

A solenoidal coil with 20 turns of wire is wound tightly around another coil with 320...

A solenoidal coil with 20 turns of wire is wound tightly around another coil with 320 turns. The inner solenoid is 21.0 cm long and has a diameter of 2.50 cm . At a certain time, the current in the inner solenoid is 0.140 A and is increasing at a rate of 1800 A/s . For this time, calculate the mutual inductance of the two solenoids; For this time, calculate the emf induced in the outer solenoid by the changing...

A helical compression spring is wound using 1 mm-diameter music wire. The outside coil diameter of...

A helical compression spring is wound using 1 mm-diameter music wire. The outside coil diameter of the spring is 11 mm. The ends are squared and there are 12 total turns. (a) Estimate the torsional yield strength of the wire. (b) Estimate the static load corresponding to the yield strength. (c) Estimate the scale of the spring. (d) Estimate the solid length of the spring. (e) Is there any possibility for buckling?

A long solenoid (black coil) with cross-sectional area A and length L is wound with N1...

A long solenoid (black coil) with cross-sectional area A and length L is wound with N1 turns of wire. (Figure 1) A time-varying current i1 flows through this wire. A shorter coil (blue coil) with N2 turns of wire surrounds it. Use μ0 for the permeability of free space. Find the value M of the mutual inductance. Note: The current in black coil is constantly changing. However, when using the hints it may help you to consider the instant at...

The mutual inductance between a long insulated coil wrapped around a solenoid is 4.0 x 10-4...

The mutual inductance between a long insulated coil wrapped around a solenoid is 4.0 x 10-4 H. If the current in the solenoid drops at a constant rate from 15.0 A to zero in 0.076 s, what is the magnitude of the emf induced in the coil?

5) A rectangular coil of wire, 22.0 cm by 35.0 cm and carrying a current of...

5) A rectangular coil of wire, 22.0 cm by 35.0 cm and carrying a current of 1.40 A, is oriented with the plane of its loop perpendicular to a uniform 1.50-T magnetic field, as shown in the figure. a) Calculate the net force which the magnetic field exerts on the coil b) Calculate the torque which the magnetic field exerts on the coil c) The coil is rotated through a 30.0degrees angle about the axis shown, the left side coming...

The 15 Ω resistance copper wire was cut into 5 equal parts and wound from them....

The 15 Ω resistance copper wire was cut into 5 equal parts and wound from them. Calculate the rope resistance.

Question