Question

In: Physics

A viscous fluid is flowing through two horizontal pipes. the pressure difference p2 - p1 between...

A viscous fluid is flowing through two horizontal pipes. the pressure difference p2 - p1 between the ends of each pipe is the same. the pipes have the same radius, although one is twice as long as the other. how does the volume flow rate Qb in the longer pipe compare with the rate Qa in the shorter pipe? (A) Qb is the same as Qa (B) Qb is twice as large as Qa (C) Qb is four times as large as Qa (D) Qb is one half as large as Qa (E) Qb is one fourth as large as Qa

Solutions

Expert Solution

Qb is one-half as large as Qa. A longer pipe offers a greater resistance to the flow of a viscous fluid than a shorter pipe does. The volume flow rate depends inversely on the length of the pipe. For a given pipe radius and pressure difference between the ends of the pipe, the volume flow rate is less in longer pipes. In this case the longer pipe is twice as long, so its volume flow rate QB is one-half that of QA.


Related Solutions

Is the value of Cd a function of the fluid which is flowing through the meter?...
Is the value of Cd a function of the fluid which is flowing through the meter? What other effect does Cd accommodate in the case of viscous fluids (in addition to viscous or friction losses)?
A viscous incompressible fluid is between two parallel plates (that are along the x-z plane), one...
A viscous incompressible fluid is between two parallel plates (that are along the x-z plane), one of them is at y = 0 and the other at y = d. a) Considerthecasewheretheflowisstationaryinthezˆdirection, driven by a pressure gradient. Write down the Navier-Stokes equations and solve for the velocity field after imposing the relevant boundary conditions. [10 points] b) The pressure gradient is now removed, but the plate at y = d is moved in an oscillatory fashion with velocity ue−iωt in...
Construct the indicated confidence interval for the difference between population proportions p1 - p2. Assume that...
Construct the indicated confidence interval for the difference between population proportions p1 - p2. Assume that the samples are independent and that they have been randomly selected. 4) x1 = 44, n1 = 64 and x2 = 50, n2 = 73; Construct a 95% confidence interval for the difference 4) between population proportions p1 - p2.
An incompressible fluid is flowing through a vertical pipe with a constriction. The wide section is...
An incompressible fluid is flowing through a vertical pipe with a constriction. The wide section is 2.00 cm in diameter and is at the top of the pipe. The pressure of the fluid in the wide section at the top is 200 kPa. The velocity of the fluid in the wide section is 4.00 m/s. The narrow section is located 4.00 m below the wide section. What is the diameter of the narrow section for the pressure of the fluid...
k1 = k2 m1=9m^2 P1=P2 What is the relationship between P1 and P2? The momentum will...
k1 = k2 m1=9m^2 P1=P2 What is the relationship between P1 and P2? The momentum will be the same? K represents kinetic energy
Explain why A) The pressure drops in a horizontally flowing fluid as the velocity increases. B)...
Explain why A) The pressure drops in a horizontally flowing fluid as the velocity increases. B) Heat’s effect on entropy is inversely proportional to the temperature at which the heat enters or leaves. C) One could never reach absolute zero.
Assume you have two processes, P1 and P2. P1 has a high priority, P2 has a...
Assume you have two processes, P1 and P2. P1 has a high priority, P2 has a low priority. P1 and P2 have one shared semaphore (i.e., they both carry out waits and posts on the same semaphore). The processes can be interleaved in any arbitrary order (e.g. P2 could be started before P1).             i.             Explain the problem with priority inversion Briefly explain whether the processes could deadlock when:            ii. both processes run on a Linux system as...
A process to remove contaminant A includes two independent pipes flowing into a cylindrical reactor, and...
A process to remove contaminant A includes two independent pipes flowing into a cylindrical reactor, and a single outlet port. The reactor has a diameter of 2.8 m and a height of 2 m. The flow in the larger of the inlet pipes is 2.5 m3/s and contains 50 μg/L of A. The smaller pipe also carries contaminant A at a rate of 5x104 μg/s. Under these conditions, the reactor’s outlet flow is 3.25 m3/s. Assuming that the removal of...
An incompressible, Newtonian fluid is flowing through a vertical circular conduit (a pipe). The flow is...
An incompressible, Newtonian fluid is flowing through a vertical circular conduit (a pipe). The flow is laminar. What is the velocity at the inner wall of the pipe? How do you know? The pipe has diameter a. The velocity profile in the pipe is vz = b ­– c r2. Please express c in terms of a and b. (You are applying a boundary condition to solve this problem.) Where in the pipe is the velocity a maximum? Please express...
If a solution with 50% one fluid 50% another flowing through a pipe, with a given...
If a solution with 50% one fluid 50% another flowing through a pipe, with a given temperature, and internal diameter of pipe and pressure gradient per metre. How would you confirm the flow is laminar ? Calculate the volumetric flow rate ? And calculate the local velocity of liquid at a given perpendicular distance from the inner wall of the pipe ?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT