A closed and elevated vertical cylindrical tank with diameter 2.00m contains water to a depth of...

A closed and elevated vertical cylindrical tank with diameter 2.00m contains water to a depth of 0.900m . A worker accidently pokes a circular hole with diameter 0.0190m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of5.00�103Pa at the surface of the water. Ignore any effects of viscosity.

A. Just after the hole is made, what is the speed of the water as it emerges from the hole? in m/s

B. What is the ratio of this speed to the efflux speed if the top of the tank is open to the air?

C. How much time does it take for all the water to drain from the tank? in min

D. What is the ratio of this time to the time it takes for the tank to drain if the top of the tank is open to the air?

Please help I have no idea how to solve it

Expert Solution

genius_generous answered 1 year ago

A closed and elevated vertical cylindrical tank with diameter 2.10 m contains water to a depth...

A closed and elevated vertical cylindrical tank with diameter 2.10 m contains water to a depth of 0.500 m . A worker accidently pokes a circular hole with diameter 0.0170 m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103 Pa at the surface of the water. Ignore any effects of viscosity. A)Just after the hole is made, what is the speed...

Water stands at a depth H in a large open tank whose side walls are vertical.

Water stands at a depth H in a large open tank whose side walls are vertical. A hole is made in one of the walls at a depth d below the water surface.At what distance R from the foot of the wall of the tank does the emergent stream strike the floor?How far above the bottom of the tank could the second hole be cut so that the stream emerging from it could have the same range as for the...

A closed, rigid tank contains water initially at 250 °F with a quality of 0.4. The...

A closed, rigid tank contains water initially at 250 °F with a quality of 0.4. The tank is heated until the water reaches 290 °F. Find the initial and final pressure, in lbf/in2 . Sketch the process on P-υ and T-υ diagrams (be sure to include the vapor dome, constant temperature and pressure lines, number your states, and indicate the process direction with an arrow). Thermodynamic

A closed rigid tank contains 2 kg of water at 80 C and quality of 0.5815....

A closed rigid tank contains 2 kg of water at 80 C and quality of 0.5815. The tank is then heated until it contains only saturated vapor. How much heat (in kJ) is added to reach this condition? Include a drawing and plot the process on a P-V diagram. Organize the solution as Given and drawing: Assumptions: First Law Analysis: Solution: PV diagram:

- A cylindrical tank is being filled simultaneously with water and sugar. The input of water...

- A cylindrical tank is being filled simultaneously with water and sugar. The input of water and sugar is carefully adjusted so that the concentration of sugar in the water is held constant at 5 grams per cubic meter. The tank has a radius of 5 meters and a height of 10 meters. At a particular point in time, the water level is 3 meters high and rising at a rate of .5 meters per second. At this time, how...

A cylindrical glass tank with a diameter of 8.6 cm and a height of 25 cm...

A cylindrical glass tank with a diameter of 8.6 cm and a height of 25 cm is inverted and inserted into another tank of water. If no air is allowed to escape from the glass container when submerged, what is the height of the air column in the glass tank when its edge is 2.0 m below the surface of the water?

A tank contains 100kg of salt and 2000L of water. Pure water enters a tank at...

A tank contains 100kg of salt and 2000L of water. Pure water enters a tank at the rate 6L/min. The solution is mixed and drains from the tank at the rate 3L/min. ) Find the concentration(kg/L) of salt in the solution in the tank as time approaches infinity. (Assume your tank is large enough to hold all the solution.)

A cylindrical tank with inner diameter 2.0 m is designed to operate as a fluidized bed...

A cylindrical tank with inner diameter 2.0 m is designed to operate as a fluidized bed reactor for a heterogeneous catalytic reaction. The tank is loaded with a random packing of cubic particles to a height of 4.0 m with voidage 0.4 before the fluidization process. The density and length of each side of the cubic particles are 2600 kg m-3 and 1.0 cm respectively. During operation, a liquid reactant with density 1000 kg m-3 and viscosity 1.0 x 10-3...

A tank whose bottom is a mirror is filled with water to a depth of 19.4...

A tank whose bottom is a mirror is filled with water to a depth of 19.4 . A small fish floats motionless 7.10 under the surface of the water. part A) What is the apparent depth of the fish when viewed at normal incidence to the water? Express your answer in centimeters. Use 1.33 for the index of refraction of water. Part B) What is the apparent depth of the reflection of the fish in the bottom of the tank...

An 800-gallon, 1.2 m wide cylindrical water tank is filled to the brim. The tank has...

An 800-gallon, 1.2 m wide cylindrical water tank is filled to the brim. The tank has a hole formed at 13.3 cm above the ground. It is observed that water leaks out of the reservoir at a speed that reduces by 3.2 m.s-1 in 1 minute 39 seconds. If the tank was initially filled to the brim how much water leaked out of the tank, and 8.2 by how much shall the point, at which water lands, change? (1 gallon...

Question