A closed rigid tank contains 2 kg of water at 80 C and quality of 0.5815....

A closed rigid tank contains 2 kg of water at 80 C and
quality of 0.5815. The tank is then heated until it contains only
saturated vapor. How much heat (in kJ) is added to reach this
condition? Include a drawing and plot the process on a P-V
diagram.

Organize the solution as
Given and drawing:
Assumptions:
First Law Analysis:
Solution:
PV diagram:

Expert Solution

genius_generous answered 2 years ago

A closed, rigid tank contains water initially at 250 °F with a quality of 0.4. The...

A closed, rigid tank contains water initially at 250 °F with a quality of 0.4. The tank is heated until the water reaches 290 °F. Find the initial and final pressure, in lbf/in2 . Sketch the process on P-υ and T-υ diagrams (be sure to include the vapor dome, constant temperature and pressure lines, number your states, and indicate the process direction with an arrow). Thermodynamic

A closed, rigid tank fitted with a paddle wheel contains 2.2 kg of air, initially at...

A closed, rigid tank fitted with a paddle wheel contains 2.2 kg of air, initially at 200oC, 1 bar. During an interval of 20 minutes, the paddle wheel transfers energy to the air at a rate of 1 kW. During this time interval, the air also receives energy by heat transfer at a rate of 0.5 kW. These are the only energy transfers. Assume the ideal gas model for the air, and no overall changes in kinetic or potential energy....

A closed, rigid, 0.40 m3 tank is filled with 15 kg of water. The initial pressure...

A closed, rigid, 0.40 m3 tank is filled with 15 kg of water. The initial pressure is p1 = 20 bar. The water is cooled until the pressure is p2= 4 bar. Determine the initial quality, x1, and the heat transfer, in kJ.

A rigid container has water of 2 kg at 120 C with a quality of 25%....

A rigid container has water of 2 kg at 120 C with a quality of 25%. The container is heated to the temperature of 140 Celsius, calculate the new quality?

A 0.2 m3 rigid tank contains 5 kg of water (in any phase or phases) at...

A 0.2 m3 rigid tank contains 5 kg of water (in any phase or phases) at 600 kPa. Which of the following values is closest to the temperature of the water in the tank? a)159 ℃ b)389 c)381 d)246 e)152

Five kg of oxygen (O2), initially at 430°C, fills a closed, rigid tank. Heat transfer from...

Five kg of oxygen (O2), initially at 430°C, fills a closed, rigid tank. Heat transfer from the oxygen occurs at the rate 425 W for 10 minutes. Assuming the ideal gas model with k = 1.350 for the oxygen, determine its final temperature, in °C. Can't seem to find the right equations to use for this one, so I'm getting pretty stumped. Any help would be greatly appreciated

A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated...

A closed, rigid tank is filled with water. Initially, the tank holds 0.6 lb of saturated vapor and 6.0 lb of saturated liquid, each at 212°F. The water is heated until the tank contains only saturated vapor. Kinetic and potential energy effects can be ignored. Determine the volume of the tank, in ft3, the temperature at the final state, in °F, and the heat transfer, in Btu.

A 500 L rigid tank contains a saturated water mixture at 200 C as shown: the...

A 500 L rigid tank contains a saturated water mixture at 200 C as shown: the mixture is 40% liquid and 60% vapour by volume (State 1). A valve on top of the tank is opened, and saturated vapor is slowly withdrawn from the tank. Heat transfer occurs during this process such that the temperature in the tank remains constant. The valve is closed when 50 % of the initial mass is withdrawn from the tank (State 2) (a) Determine...

Five lbs of propane is contained in a closed, rigid tank initially at 80 lbf/in.2, 50°F....

Five lbs of propane is contained in a closed, rigid tank initially at 80 lbf/in.2, 50°F. Heat transfer occurs until the final temperature in the tank is 0°F. Kinetic and potential energy effects are negligible. Determine the amount of energy transfer by heat, in Btu.

A 3 m^3 rigid tank contains 10 kg of H2O at 70 C. a. Determine the...

A 3 m^3 rigid tank contains 10 kg of H2O at 70 C. a. Determine the specific volume of the system b. Determine the pressure c. The phase description and quality (x) if it is in the two phase region (saturated mixture) d. The mass of each phase of water e. The specific internal energy (u) of the system

Question