Question
In: Mechanical Engineering
A power plant operates on a regenerative vapor power cycle with one open feedwater heater. Steam...
A power plant operates on a regenerative vapor power cycle with
one open feedwater heater. Steam enters the first
turbine stage at 12 MPa, 520◦C and expands to 1 MPa, where some of
the steam is extracted and diverted to the open
feedwater heater at 1 MPa. The remaining steam expands through the
second turbine stage to the condenser pressure of
6 kPa. Saturated liquid exits the open feedwater heater at 1 MPa.
For isentropic processes in the turbines and pumps,
determine for the cycle.
a) The thermal efficiency.
b) The net power developed, in MW, for a mass flow rate of 106 kg/h
into the first-stage turbine.
Solutions
samet mamat answered 1 year agoRelated Solutions
A power plant operates on a regenerative vapor power cycle with one open feedwater heater. Steam...
A power plant operates on a regenerative vapor power cycle with
one open feedwater heater. Steam enters the first turbine stagge at
12 MPa, 560*C and expands to 1 MPa, where some of the steam is
extracted and diverted to the open feedwater heater operating at 1
MPa. The remaining steam expands through the second turbine stage
to the condenser pressure of 6 kPa. Saturated liquid exits the open
feedwater heater at 1 MPa. The net power output for the...
A power plant operates on a regenerative vapor power cycle with one open feedwater heater. Steam...
A power plant operates on a regenerative vapor power cycle with
one open feedwater heater. Steam enters the first turbine stage at
12 MPa, 560°C and expands to 1 MPa, where some of the steam is
extracted and diverted to the open feedwater heater operating at 1
MPa. The remaining steam expands through the second turbine stage
to the condenser pressure of 50 kPa. Saturated liquid exits the
open feedwater heater at 1 MPa. The net power output for the...
A power plant operates on a regenerative vapor power cycle with one open feedwater heater. Steam...
A power plant operates on a regenerative vapor power cycle with
one open feedwater heater. Steam enters the first turbine stage at
12 MPa, 560°C and expands to 1 MPa, where some of the steam is
extracted and diverted to the open feedwater heater operating at 1
MPa. The remaining steam expands through the second turbine stage
to the condenser pressure of 28 kPa. Saturated liquid exits the
open feedwater heater at 1 MPa. The net power output for the...
A steam power plant operates on a regenerative Rankine cycle with two feedwater heaters, one closed...
A steam power plant operates on a regenerative Rankine
cycle with two feedwater heaters, one closed and one open. Steam
enters the turbine at 12.5 MPa and 550ºC and exhausts to the
condenser at 10 kPa. Steam is extracted from the turbine at 1 MPa
for the closed feedwater heater and 0.8 MPa for the open one. The
feedwater is heated to the condensation temperature of the
extracted steam in the closed feedwater heater. The extracted steam
leaves the closed...
4. Consider a reheat–regenerative vapor power cycle with two feedwater heaters, a closed feedwater heater and...
4. Consider a reheat–regenerative vapor power cycle with two
feedwater heaters, a closed feedwater heater and an open feedwater
heater. Steam enters the first turbine at 12.0 MPa, 520C and
expands to 0.6 MPa. The steam is reheated to 440C before entering
the second turbine, where it expands to the condenser pressure of
0.006 MPa. Steam is extracted from the first turbine at 2 MPa and
fed to the closed feedwater heater. Feedwater leaves the closed
heater at 200C and...
Consider a regenerative vapor power cycle with two feedwater heaters, a closed one and an open...
Consider a regenerative vapor power cycle with two feedwater
heaters, a closed one and an open one, and reheat. Steam enters the
first turbine stage at 12 MPa, 560 °C, and expands to 1.5 MPa. Some
steam is extracted at 1.5 MPa and fed to the closed feedwater
heater. The remainder is reheated at 1.5 MPa to 440 °C and then
expands through the second-stage turbine to 0.3 MPa, where an
additional amount is extracted and fed into the open...
Consider a regenerative vapor power cycle with two feedwater heaters, a closed one and an open...
Consider a regenerative vapor power cycle with two feedwater
heaters, a closed one and an open one, and reheat. Steam enters the
first turbine stage at 12 MPa, 480°C, and expands to 2 MPa. Some
steam is extracted at 2 MPa and fed to the closed feedwater heater.
The remainder is reheated at 2 MPa to 440°C and then expands
through the second-stage turbine to 0.3 MPa, where an additional
amount is extracted and fed into the open feedwater heater...
A steam power plant operates on a regenerative Rankine cycle. Steam enters the turbine at 6...
A steam power plant operates on a regenerative Rankine cycle.
Steam enters the turbine at 6 MPa at 700 ºC and the condenser at 10
kPa. Turbine has isentropic efficiency of 85% and pumps have
isentropic efficiency of 90%. Steam is extracted from the turbine
at 0.6 MPa to heat the feedwater in an open feedwater heater. Water
leaves the open feedwater heater as saturated liquid.
a) Draw the system with labels and show the ideal and the
non-ideal cycle...
(REGENERATIVE CYCLE WITH ONE CLOSED AND ONE OPEN HEATER): Do not use your Steam Tables. Refer...
(REGENERATIVE CYCLE WITH ONE CLOSED AND ONE OPEN HEATER): Do not
use your Steam Tables. Refer to the H2O properties given in the
table below.
A regenerative cycle with one stage of
reheating is executed with steam expanding initially from 20 Mpaa
and 540 deg C. The reheater pressure is 10 Mpaa. The steam leaves
the reheater at 540 deg C. Steam is bled after reheating to one
CFWH and on one OFWH a pressure equal to 5 Mpaa and...
Problem 8.045 SI Consider a regenerative vapor power cycle with two feedwater heaters, a closed one...
Problem 8.045 SI
Consider a regenerative vapor power cycle with two feedwater
heaters, a closed one and an open one, and reheat. Steam enters the
first turbine stage at 12 MPa, 560°C, and expands to 2 MPa. Some
steam is extracted at 2 MPa and fed to the closed feedwater heater.
The remainder is reheated at 2 MPa to 520°C and then expands
through the second-stage turbine to 0.3 MPa, where an additional
amount is extracted and fed into the...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- b. Do any unions represent employees in Microsoft? Describe which unions are involved. c. Have there been...
- Look up and use each of these Linux commands. (Each command will have two parts) Summarize...
- What was Lincoln 10 percent plan and what problems did it present?
- A cantilever beam 4m long carries a uniform load of 3.5 kN/m over a portion 1.5m...
- Our next optimization comes from using the brilliant Rabin-Karp substring matching algorithm (RK for short), invented...
- Give an example of an experiment to determine the focal length of a concave lens. (Note...
- Search the Internet to find (at least 2 websites) related to the general field of malware....
ADVERTISEMENT