Two reservoirs have a difference in height of 10 meters at the free surface. They are...

Two reservoirs have a difference in height of 10 meters at the free surface. They are connected by two pipes in series; the first tube is 20 m long and has a diameter of 6 cm. The second tube is 10 meters long with a diameter of 10 cm. At the change in tubes, an expander (θ = 20°) is fitted, there are two 90° bends (flanged) in the second section of piping Assuming f = 0.0216 for both tubes, what is the flow rate?

Expert Solution

samet mamat answered 1 year ago

Question 1: At a height of ten meters above the surface of a freshwater lake, a...

Question 1: At a height of ten meters above the surface of a freshwater lake, a sound pulse is generated. The echo from the bottom of the lake returns to the point of origin 0.175 s later. The air and water temperatures are 20 oC. How deep is the lake? Question2: A hunter is standing on flat ground between two vertical cliffs that are directly opposite one another. He is closer to one cliff than the other. He fires a...

A new 5 km long pipeline connects two reservoirs. The water surface elevation in the upper...

A new 5 km long pipeline connects two reservoirs. The water surface elevation in the upper reservoir is 1100 m and in the lower reservoir is 835 m. The pipeline is 400 mm nominal diameter commercial steel with a sharp-edged inlet and includes the following flanged fittings. 10 - gate valves 19 - standard radius 90° elbows 37 – standard radius 45° elbows 8 – straight (line flow) tees What is the maximum water flow rate between the reservoirs in...

The length, width, and height of a room are measured to be 4.1 meters, 3.2 meters,...

The length, width, and height of a room are measured to be 4.1 meters, 3.2 meters, and 2.4 meters, respectively. Each measurement is subject to a 1% error. Find the volume of the room and it’s uncertainty in cubic meters. Assume that the percentage errors add. Express the answer with the appropriate number of significant digits.

Express your height in the units of inches, feet, and meters.

A physician wants to test two blood glucose meters to see if there is any difference...

A physician wants to test two blood glucose meters to see if there is any difference in measurements. To do this, he measures the glucose in blood samples taken from several randomly selected patients with both meters. Suppose that data were collected for a random sample of 10 patients, where each difference is calculated by subtracting the blood glucose rating from Meter A from the blood glucose reading from Meter B. Assume that the measurements are normally distributed. What is/are...

Water flows between two reservoirs through 800 ft of 12-inch diameter welded-steel pipe. The water surface...

Water flows between two reservoirs through 800 ft of 12-inch diameter welded-steel pipe. The water surface elevation difference between the two reservoirs is 16 ft. Find the flowrate (a) assuming head loss is only due to pipe friction, and (b) Accounting for both friction losses and minor losses due to a flush square-edged pipe entrance, the pipe exit, and a half-open gate valve in the line. Assume the water temperature is 60°F.

An object of mass 200kG is at a height of 50 meters above the ground and...

An object of mass 200kG is at a height of 50 meters above the ground and is moving with a speed of 1.8m⁄s . Calculate its: - Potential energy at that height? - Kinetic energy? - Total energy and momentum? - Objects total momentum at that height?

A projectile is fired at a height of 2 meters above the ground with an initial...

A projectile is fired at a height of 2 meters above the ground with an initial velocity of 100 meteres per second at an angle of 35° with the horizontal. Round each result to the nearest tenths of a unit. a) Find the vector-valued function describing the motion b) Find the max height c) How long was the projectile in the air d) Find the range

The height of maple trees are distributed normally with a mean of 31 meters and a...

The height of maple trees are distributed normally with a mean of 31 meters and a standard deviation of 4 meters. a) What is the probability of a tree being taller than 33 meters? Represent this graphically as well as numerically. b) A group of 20 trees is selected at random. What is the probability that the average height of these 20 trees is more than 33 meters? Represent this graphically as well as numerically. c) A group of 20...

A coordinate system (in meters) is constructed on the surface of a pool table, and three...

A coordinate system (in meters) is constructed on the surface of a pool table, and three objects are placed on the table as follows: a 2.0-kg object at the origin of the coordinate system, a 6.0-kg object at (0, 2.0), and a 11.0-kg object at (4.0, 0). Find the resultant gravitational force exerted by the other two objects on the object at the origin.

Question