Question

In: Other

1a) If the atmospheric condition at sea level is 101.3 kPa and 18oC, estimate and plot...

1a) If the atmospheric condition at sea level is 101.3 kPa and 18oC, estimate and plot the pressure as a function of elevation for the following conditions:

i. Air temperature is constant.
ii. Air temperature decreases linearly with elevation at a rate of 6.0oC/km.

1b) Use the result above to estimate pressure and temperature of air on top of Mount Everest (height ~ 8,800 m). State all assumptions used.

Solutions

Expert Solution

Here k is BOLTZMAN CONSTANT.

DEAR STUDENT, IF YOU HAVE ANY QUERY REGARDING THE SOLUTION KINDLY ASK ME. I SHALL TRY MY BEST TO RESOLVE YOUR QUERY. THANK YOU.


Related Solutions

a) If the atmospheric condition at sea level is 101.3 kPa and 18oC, estimate and plot...
a) If the atmospheric condition at sea level is 101.3 kPa and 18oC, estimate and plot the pressure as a function of elevation for the following conditions:   i. Air temperature is constant ii. Air temperature decreases linearly with elevation at a rate of 6.0oC/km. b) Use the result above to estimate pressure and temperature of air on top of Mount Everest (height ~ 8,800 m). State all assumptions used.
Question 1. The height of a mercury column for atmospheric pressure at sea level is h...
Question 1. The height of a mercury column for atmospheric pressure at sea level is h = 0.760 + or - 0.003m of mercury (m-Hg).If the density of mercury is p = 13600 + or - 1000kg/m3 and the acceleration due to gravity, g = 9.8 + or - 0.1ms-2 , determine the value of atmospheric pressure Po = pgh and its uncertainty in SI units. Question 2. A particle is moving in a straight line so that its velocity...
At some location and at some initial time the atmospheric pressure at sea level is 1000mb...
At some location and at some initial time the atmospheric pressure at sea level is 1000mb and the temperature between sea level and 900mb surface is 0°C. The atmosphere is in hydrostatic balance. (a) What is the height above sea level of the 900mb surface? (b) Over a period of one day the temperature of sea level and the 900mb surface rises from 0 to 3°C, but the height of the 900mb surface does not change. What is the new...
A liquid mixture of benzene-toluene is to be distilled in a fractionating tower at 101.3 kPa...
A liquid mixture of benzene-toluene is to be distilled in a fractionating tower at 101.3 kPa pressure. The feed of 100 kg mol/h is liquid, containing 45 mol benzene and 55 mol% toluene, and enters at 327.6 K. A distillate containing 95 mol benzene and 5 mol toluene and a bottoms containing 10 mol benzene and 90 mol toluene are to be obtained. The reflux ratio R is 4: 1. Determine the kg moles per hour distillate, kg moles per...
A liq mixture of benzene-toluene is to be distilled in a fractionating tower at 101.3 kPa...
A liq mixture of benzene-toluene is to be distilled in a fractionating tower at 101.3 kPa pressure. The feed of 100 kg mol/h is liquid and it contains 45 mole % benzene and 55 mole % toluene and enters at 327.6 K (130 ◦F). A distillate containing 95 mole % benzene and 5 mole % toluene and a bottoms containing 10 mole % benzene and 90 mole % toluene are to be obtained. The average heat capacity of the feed...
What is the theoretical boiling point of 1 M NaCol at sea level (normal atmospheric pressure)?...
What is the theoretical boiling point of 1 M NaCol at sea level (normal atmospheric pressure)? What is the freezing point of the same solution? Show calculations.
1a) Starting at the level of the external environment, identify the environmental condition and series of...
1a) Starting at the level of the external environment, identify the environmental condition and series of steps that would be required to hyperpolarize an ‘on’ bipolar cell. Assume that the photoreceptor is wired directly to the bipolar cell. 1b) How would the environmental condition and/or series of steps in part 1a) be different (if at all) if you had hyperpolarized an ‘off’ bipolar cell? Again, assume that the photoreceptor is wired directly to the bipolar cell. 1c) In question 1b),...
electronic psychrometric plotting program, let’s consider atmospheric conditions at sea level with a dry bulb temperature...
electronic psychrometric plotting program, let’s consider atmospheric conditions at sea level with a dry bulb temperature (Tdry bulb ) of 23˚C and a relative humidity (RH) of 30%. Plot this state point on the pyschrometric chart available in PsycPro software. Use PsycPro to determine the following: a. Wet bulb temperature (WBT) of the air b. Dew point temperature (DPT) of the air c. Humidity ratio (specific humidity) d. Enthalpy e. Specific volume of the air (i) Provide the values for...
Two flash resistance drums operated at 101.3 kPa are connected continuously. You want to separate the...
Two flash resistance drums operated at 101.3 kPa are connected continuously. You want to separate the hexaneooctane mixture. (Make the effective number two digits. (a) fed feed with a zhexane of 0.3, 900 lbmol/hr, making V/F one-third flash at this time How much is the liquid and vapor composition (yhexane,1, xhexane,1) of the hexane leaving the drum? (b) (a) where the vapor disillate obtained through the problem is to be re-separated using the flash resistance drum; All. The hexane composition...
1) A 2.00 g sample of gas occupies 8.40 m3 at 0°C and 101.3 kPa pressure....
1) A 2.00 g sample of gas occupies 8.40 m3 at 0°C and 101.3 kPa pressure. Calculate the volume at 0°C and a pressure of 84.0 kPa. 2) Small amounts of hydrogen are conveniently prepared by reacting zinc with hydrochloric acid. Zn + 2HCl --> ZnCl2 + H2 How many grams of zinc are required to prepare 2.50 L H2(g) at 765 Torr and 22°C?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT