Question

In: Other

A liquid flows down an inclined plane surface in a steady, full developed laminar film of...

A liquid flows down an inclined plane surface in a steady, full developed laminar film of thickness h. Simplify the Navier-Stokes equations to model this flow field. Obtain expressions for the liquid velocity profile, the shear stress distribution, the volumetric flow rate, and the average velocity. Calculate the volumetric flow rate in a film of water h=1 mm thick, flowing on a surface b=1 m wide, inclined at 15 degrees to the horizontal.

Solutions

Expert Solution

Amanda K answered 2 years ago
Next > < Previous

Related Solutions

Question 1: Liquid (A) flows down as a thin film over the outside surface of a...
Question 1: Liquid (A) flows down as a thin film over the outside surface of a vertical flat plate 1.5 m wide (W = 1.5 m) and 3.5 m long (L = 3.5). Inert gas (B) flows across (perpendicular to) the width of the flat plate at a speed of 5 m/s. The supply of (A) is 0.27 mol/s at one end of the plate and the flow is considered to be turbulent. The gas composition of (A) at the...
A steady two-dimensional laminar fully-developed flow downward between two fixed parallel plates inclined at 50" with...
A steady two-dimensional laminar fully-developed flow downward between two fixed parallel plates inclined at 50" with horizontal is shown in figure. The pressure gradient in the direction of the flow is -3935 N/m' per m. Note the space between parallel plates is 5mm.Use the Navier-Stokes equation in the flow direction to determine: a-Velocity distribution of the flow between two plates. b-Shear stress distribution of the low between two plates. c- The average velocity of the flow d- Maxinmum velocity e-Mininmum...
does accleration increase down an inclined plane
does accleration increase down an inclined plane
An inclined plane is sliding, and accelerating, on a horizontal frictionless surface. There is a block...
An inclined plane is sliding, and accelerating, on a horizontal frictionless surface. There is a block at rest on the sloping surface, held in place by static friction through the horizontal acceleration of the system. The coefficient of static friction between the block and the inclined plane is 0.615. The slope of the incline plane is 40.5 degrees with respect to the horizontal. What is minimum acceleration of the inclined plane for the square block not to slide? What is...
An inclined plane is sliding, and accelerating, on a horizontal frictionless surface. There is a block...
An inclined plane is sliding, and accelerating, on a horizontal frictionless surface. There is a block at rest on the sloping surface, held in place by a static friction through the horizontal acceleration of the system. the coefficient of static friction between the block and the inclined plane is 0.615. the slope of the incline plane is 42.5 degrees with respect to the horizontal. a) What is the minumum acceleration of the inclined plane for the square block not to...
The diagram shows a mass after it slides down the inclined plane. There is a static...
The diagram shows a mass after it slides down the inclined plane. There is a static friction coefficient of 0.5 and a kinetic friction coefficient of 0.3 between the box and the incline. The angle of the incline is 30 degrees , and the box has a mass of 4 kg . The starting height at the top of the ramp is 0.8 meters (and the distance along the ramp is 1.6 meters ). A) Prove, with numbers, that the...
If a block slides down an inclined plane having friction with a spring attached to the...
If a block slides down an inclined plane having friction with a spring attached to the horizontal plane at the bottom of the plane.Find the coefficine tof kinetic friction. mass of the block is 10 kg and the angle is 30 degrees the spring constant is 500 N/m
A. A sphere and a cylinder roll down an inclined plane, started from rest at the...
A. A sphere and a cylinder roll down an inclined plane, started from rest at the same time. They have the same radii, but not the same mass. Does one reach the bottom first? If so, which? Explain your reasoning. B. Two spheres roll down an inclined plane, starting from rest at the same time. Sphere A has radius R and mass m. Sphere 2 has radius 2R and mass m. Does one reach the bottom first? If so, which?...
If a frictionless surface is elevated to form an inclined plane what effect does it have...
If a frictionless surface is elevated to form an inclined plane what effect does it have on velocity and acceleration of an object that is sliding down it? ( this would be Versus the velocity and acceleration of an object on a flat frictionless surface) ? If the angle is increased more how are velocity and acceleration affected
A block of mass 5 kg rests on a 30° inclined plane. The surface is rough....
A block of mass 5 kg rests on a 30° inclined plane. The surface is rough. The coefficient of friction between the surface and the block is 0.5. Find the frictional force exerted by the plane on the block. (N)
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT