Question

In: Mechanical Engineering

The vanes of a helicopter has an angular speed of 60r/min. There are three vanes with...

The vanes of a helicopter has an angular speed of 60r/min. There are three vanes with a length of 4.2 m and a width of 0.25m each. The air is at a temperature of 15ºC. Transition takes place at Recr = 3.2 e5 . Calculate the aerodynamic torque required to overcome skin friction.

Solutions

Expert Solution

Properties of air taken from below table

A thumbs up, pls !!


Related Solutions

A helicopter has a rotor (radius R0) that rotates with constant angular speed ω. The helicopter...
A helicopter has a rotor (radius R0) that rotates with constant angular speed ω. The helicopter is accelerating vertically with constant acceleration A0, starting from rest. Using cylindrical coordinates a) Write the position vector of the tip of the rotor as a function of time. b) Find the velocity vector of the rotor tip as a function of time by taking the derivative of the previous result. c) Find the acceleration vector of the rotor tip as a function of...
A ceiling fan is turned on and reaches an angular speed of 120 rev/min in 50...
A ceiling fan is turned on and reaches an angular speed of 120 rev/min in 50 sec. It is then turned off and coasts to a stop in 40 s. Find the total number of revolution made before the fan stops
A wheel is rotating freely at angular speed 530 rev/min on a shaft whose rotational inertia...
A wheel is rotating freely at angular speed 530 rev/min on a shaft whose rotational inertia is negligible. A second wheel, initially at rest and with 5 times the rotational inertia of the first, is suddenly coupled to the same shaft. (a) What is the angular speed of the resultant combination of the shaft and two wheels? (b) What fraction of the original rotational kinetic energy is lost?
A wheel rotates with a constant angular acceleration of 3.0 rad/. If the angular speed of...
A wheel rotates with a constant angular acceleration of 3.0 rad/. If the angular speed of the wheel is 2 rad/s at t = 0, through what angular displacement does the wheel rotate in 2 s? 10 rad. 6 rad. 15 rad. 4 rad. 12 rad. Based on question number 3, through how many revolutions has the wheel turned during this time interval?   4 rev. 3 rev. 1.6 rev. 5 rev. 2 rev. Based on question number 3, what is...
The Earth has an angular speed of 7.272·10-5 rad/s in its rotation. Find the new angular...
The Earth has an angular speed of 7.272·10-5 rad/s in its rotation. Find the new angular speed if an asteroid (m = 3.91·1022 kg) hits the Earth while traveling at a speed of 2.87·103m/s (assume the asteroid is a point mass compared to the radius of the Earth) in each of the following cases: a) The asteroid hits the Earth dead center. b) The asteroid hits the Earth nearly tangentially in the direction of Earth's rotation. c) The asteroid hits...
The Earth has an angular speed of 7.272·10-5 rad/s in its rotation. Find the new angular...
The Earth has an angular speed of 7.272·10-5 rad/s in its rotation. Find the new angular speed if an asteroid (m = 4.87·1022 kg) hits the Earth while traveling at a speed of 4.93·103 m/s (assume the asteroid is a point mass compared to the radius of the Earth) in each of the following cases: a) The asteroid hits the Earth dead center. b) The asteroid hits the Earth nearly tangentially in the direction of Earth's rotation. c) The asteroid...
A wheel of radius 8 inches is rotating 15°/s. What is the linear speed v, the angular speed in RPM, and the angular speed in rad/s?
A wheel of radius 8 inches is rotating 15°/s. What is the linear speed v, the angular speed in RPM, and the angular speed in rad/s?
A disk rotates with constant angular acceleration. The initial angular speed of the disk is 2?...
A disk rotates with constant angular acceleration. The initial angular speed of the disk is 2? rad/s. After the disk rotates through 20? radians, the angular speed is 3? rad/s. (a) What is the magnitude of the angular acceleration? rad/s2 (b) How much time did it take for the disk to rotate through 20? radians? s (c) What is the tangential acceleration of a point located at a distance of 3 cm from the center of the disk? m/s2
A dentist causes the bit of a high-speed drill to accelerate from an angular speed of...
A dentist causes the bit of a high-speed drill to accelerate from an angular speed of 1.46 x 104 rad/s to an angular speed of 3.29 x 104 rad/s. In the process, the bit turns through 3.02 x 104 rad. Assuming a constant angular acceleration, how long would it take the bit to reach its maximum speed of 9.56 x 104 rad/s, starting from rest?
A uniform solid sphere with Radius R has KE (rotational) at an angular speed of w...
A uniform solid sphere with Radius R has KE (rotational) at an angular speed of w when spinning about an axis through its center. A uniform thin-walled hollow shell of radius 2R has 1/3 KE (rotational) at an angular speed of w when spinning about an axis through its center. If m=M for solid sphere, whats the mass of the hollow sphere?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT