5. Design a cast iron flywheel for a four stroke cycle engine to develop 110 kW...

5. Design a cast iron flywheel for a four stroke cycle engine to develop 110 kW at 150 r.p.m. The work
done in the power stroke is 1.3 times the average work done during the whole cycle. Take the mean
diameter of the flywheel as 3 metres. The total fluctuation of speed is limited to 5 per cent of the mean
speed. The material density is 7250 kg / m3. The permissible shear stress for the shaft material is
40 MPa and flexural stress for the arms of the flywheel is 20 MPa.

Solutions

Expert Solution

samet mamat answered 8 months ago

Next > < Previous

Related Solutions

12. Design a cast iron flywheel having six arms for a four stroke engine developing 120...

12. Design a cast iron flywheel having six arms for a four stroke engine developing 120 kW at 150 r.p.m. The mean diameter of the flywheel may be taken as 3 metres. The fluctuation of speed is 2.5% of mean speed. The workdone during the working stroke is 1.3 times the average workdone during the whole cycle. Assume allowable shear stress for the shaft and key as 40 MPa and tensile stress for cast iron as 20 MPa. The following...

Design a four stroke cycle for SI engine using crankcase compression. Draw schematics of the six...

Design a four stroke cycle for SI engine using crankcase compression. Draw schematics of the six basic process: intake, compression, combustion, expansion, blowdown and exhaust. Describe fully the intake of air, fuel and oil.

15. A four stroke oil engine developing 75 kW at 300 r.p.m is to have the...

15. A four stroke oil engine developing 75 kW at 300 r.p.m is to have the total fluctuation of speed limited to 5%. Two identical flywheels are to be designed. The workdone during the power stroke is found to be 1.3 times the average workdone during the whole cycle. The turning moment diagram can be approximated as a triangle during the power stroke. Assume that the hoop stress in the flywheel and the bending stress in the arms should not...

A single-cylinder, four stroke research engine operates on Otto cycle. The specification of the engine is...

A single-cylinder, four stroke research engine operates on Otto cycle. The specification of the engine is shown as below:- Displacement volume of the cylinder = 540 cm3 Clearance volume of the cylinder = 60 cm3 Minimum temperature = 200°C Minimum pressure = 200 kPa Net work output = 1000 kJ/kg Sketch the process on a P-V diagram and by using constant specific heat at room temperature, determine: i) the temperature and pressure at each process, ii) the thermal efficiency of...

11. A cast iron flywheel is to be designed for a single cylinder double acting steam...

11. A cast iron flywheel is to be designed for a single cylinder double acting steam engine which delivers 150 kW at 80 r.p.m. The maximum fluctuation of energy per revolution is 10%. The total fluctuation of the speed is 4 per cent of the mean speed. If the mean diameter of the flywheel rim is 2.4 metres, determine the following : (a) Cross-sectional dimensions of the rim, assuming that the hub and spokes provide 5% of the rotational inertia...

An ideal four stroke Otto cycle engine has 6 cylinders and a displacement of 4 Liters....

An ideal four stroke Otto cycle engine has 6 cylinders and a displacement of 4 Liters. It has a compression ratio of 8.5:1. If the mean effective pressure is 4000 kPa when operating at 3000 rpm, what will be the indicated power and what is the required heat transfer to the engine from a combusting fuel?

Ai inventor proposes a four -stroke cycle running on helium. The engine has a compression ratio...

Ai inventor proposes a four -stroke cycle running on helium. The engine has a compression ratio of 8 and maximum operating temperature of 1,500 K. The atmospheric conditions are temperature of 300 K and pressure of 100 kPa. The processes can be approximated as below: 1- 2 isentropic compression 2- 3 constant volume heat addition 3- 4 isentropic expansion 4- 1 constant pressure heat removal a. Plot P-v and T-s diagrams for this cycle. b. Determine state conditions at the...

1) A four-stroke diesel engine has a piston diameter of 16.5 cm and a stroke of...

1) A four-stroke diesel engine has a piston diameter of 16.5 cm and a stroke of 27 cm. The compression ratio is 14.3, the cut-off 4.23% of the stroke and the mean effective pressure 4.12 bar. The engine speed is 264 rev/min and the fuel consumption is 1.076 kg of oil per hour, having a calorific value of 39150 kJ/kg. Calculate the relative efficiency of the engine 2). A diesel engine has a brake thermal efficiency of 30%. If the...

During the power stroke in a four-stroke automobile engine, the pis-ton is forced down as the...

During the power stroke in a four-stroke automobile engine, the pis-ton is forced down as the mixture of combustion products and air undergoes an adiabatic expansion. Assume (1) the engine is running at 2500 cycles/min; (2) the pressure immediately before the expansion is 20.0 atm; (3) the volumes of the mixture immediately before and after the expansion are 50.0 cm3and 400 cm3, respectively ; (4) the time interval for expansion is one-fourth that of the total cycle; and (5) the...

Problem 1: A 5.2-liter, spark-ignition, four-stroke cycle, V6 automobile engine operates at 2400 RPM with ?...

Problem 1: A 5.2-liter, spark-ignition, four-stroke cycle, V6 automobile engine operates at 2400 RPM with ? = 1.5. The engine has a volumetric efficiency of 89%, with bore as B = 2.1 S. The density of air at room temperature is 1.18 kg/m3. Lamda = 1.5 Calculate: Stroke length (m and cm) Average piston speed (m/sec) Mass flow rate of air into engine [kg/sec] Mass flow rate of fuel into engine [kg/sec]

Subjects