Question

In: Math

The tensile strength of a fiber used in manufacturing cloth is of interest to the purchaser....

The tensile strength of a fiber used in manufacturing cloth is of interest to the purchaser. Previous experience indicates that the standard deviation of tensile strength is 2 psi. A random sample of eight fiber specimens is selected, and the average tensile strength is found to be 127 psi. USING MINITAB (please show all work)

(a) Test the hypothesis that the mean tensile strength equals 125 psi versus the alternative that the mean exceeds 125 psi. Use a = 0.05.

(b) What is the P-value for this test?

(c) Discuss why a one-sided alternative was chosen in part (a).

(d) Construct a 95% lower confidence interval on the mean tensile strength.

Solutions

Expert Solution

This question is solved by using Minitab software.

Path : stat- basic statistic - 1sample t test.

Data entering-

Output-

---------------------------------------------------------------------------------------

Dear student,

I have given my 100% to solve your problem.

Please help me out by giving thumbs up.

Thank you so much.


Related Solutions

The average tensile strength of carbon fiber cloth is 600 MPa. You are testing a new...
The average tensile strength of carbon fiber cloth is 600 MPa. You are testing a new weaving pattern for the carbon fiber threads and want to know if this new weave causes a difference in the tensile strength. After testing 18 samples of the new weave, you found a sample average of 585 MPa with a standard deviation of 34 MPa. At a significance level of 0.05, test to see if this new weave has a different mean than 600...
A product developer is investigating the tensile strength of a new synthetic fiber that will be...
A product developer is investigating the tensile strength of a new synthetic fiber that will be used to make cloth for men's shirts. Strength is usually affected by the percentage of cotton used in the blend of material for the fiber. The engineer conducts a completely randomized experiment with five levels of cotton and replicates the experiment five time. The data are shown bellow Cotton weight percent Observation 15 20 25 30 35 1 7 12 14 19 7 2...
Compute the longitudinal tensile strength of an aligned glass fiber-epoxy matrix composite in which the average...
Compute the longitudinal tensile strength of an aligned glass fiber-epoxy matrix composite in which the average fiber diameter and length are 0.0155 mm (0.60 × 10-4 in.) and 1.07 mm (0.042 in.), respectively, and the volume fraction of fibers is 0.38. Assume that (1) the fiber-matrix bond strength is 100 MPa (14,500 psi), (2) the fracture strength of the fibers is 3500 MPa (5 × 105 psi), and (3) the matrix stress at composite failure is 5.5 MPa (800 psi).
An engineer studying the tensile strength of a composite material knows that tensile strength is approximately...
An engineer studying the tensile strength of a composite material knows that tensile strength is approximately normally distributed with σ = 60 psi. A random sample of 20 specimens has a mean tensile strength of 3450 psi. (a) Test the hypothesis that the mean tensile strength is 3500 psi, using α = 0.01 (b) What isthe smallest level of significance at which you would be willing to reject the null hypothesis? (c) What is the β error for the test...
An engineer who is studying the tensile strength of a steel alloy knows that tensile strength...
An engineer who is studying the tensile strength of a steel alloy knows that tensile strength is approximately normally distributed with sigma= 60 psi. A random sample of 12 specimens has a mean tensile strength of 3450 psi. a) Compute a two-side confidence interval on the maen tensile strength at a 95% confidence level. b) Test the hypothesis that the mean strength is 3500 psi at alfa=0.05, and provide a conclusion statement. c) If we keep the signifiance level constant...
An engineer who is studying the tensile strength of a steel alloy knows that tensile strength...
An engineer who is studying the tensile strength of a steel alloy knows that tensile strength is approximately normally distributed with σ = 60 psi. A random sample of 12 specimens has a mean tensile strength of 3450 psi. a) Compute a two-sided confidence interval on the mean tensile strength at a 95% confidence level b) Test the hypothesis that the mean strength is 3500 psi at α= 0.05, and provide a conclusion statement
: Determine the LRFD tensile design strength and the ASD tensile strength of the connection shown...
: Determine the LRFD tensile design strength and the ASD tensile strength of the connection shown if eight 7/8-in bolts are used in each flange to connect W18 X 76 with two 3/4 X 14-in plates. Include block shear calculations. (Fy = 50 ksi, Fu = 65 ksi)
A cloth manufacturing company claims that the mean tearing strength of their curtain fabric is 120...
A cloth manufacturing company claims that the mean tearing strength of their curtain fabric is 120 pounds. A government inspection agency conducted tests on 100 curtain lengths revealing a mean strength of 115 pounds with a standard deviation of 20 pounds. At the 1% level of significance, does the governments’ information support the manufacturer’s claim? State what is given, what are the hypothesis, what is the test statistic, draw a graph, find the p-value and state the conclusion. As an...
Question: A cloth manufacturing company claims that the mean tearing strength of their curtain fabric is...
Question: A cloth manufacturing company claims that the mean tearing strength of their curtain fabric is 120 pounds. A government inspection agency conducted tests on 49 curtain lengths revealing a mean strength of 115 pounds with a standard deviation of 20 pounds. At the 10% level of significance, does the governments’ information show that the mean tearing strength of the fabric is lower than manufacturer’s claim?
vickers hardness test and tensile strength what is the correalation between hardness and tensile strength. how...
vickers hardness test and tensile strength what is the correalation between hardness and tensile strength. how could you estimate one from the other
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT