A milk truck carries milk with density 64.6 lb/ft3 in a horizontal cylindrical tank with diameter...

A milk truck carries milk with density 64.6 lb/ft3 in a horizontal cylindrical tank with diameter 4 ft. (a) Find the force exerted by the milk on one end of the tank when the tank is full. (Round your answer to the nearest integer.) lb (b) What if the tank is half full? (Round your answer to one decimal place.) lb.

Expert Solution

milcah answered 2 years ago

Consider a 2.5cm diameter thin walled horizontal cylindrical pipe that carries chilled water at about 5°C....

Consider a 2.5cm diameter thin walled horizontal cylindrical pipe that carries chilled water at about 5°C. The pipe is very long and is indoors in a climate controlled area with essentially still air. Design an insulation system that will reduce heat gain per unit length of pipe by at least 75% as compared to the heat gain to the bare pipe. Completely specify the insulation system (materials, dimensions, etc.) you design.

A gas with a density of 1.1 lb/ft3 weighs 3.6 lbf on the Moon, where the...

A gas with a density of 1.1 lb/ft3 weighs 3.6 lbf on the Moon, where the acceleration of gravity is 5.47 ft/s2. Determine its weight, in lbf, and volume, in ft3, on Mars, where g = 12.86 ft/s2.

A two-phase liquid–vapor mixture of Refrigerant 134a is contained in a 2-ft3, cylindrical storage tank at...

A two-phase liquid–vapor mixture of Refrigerant 134a is contained in a 2-ft3, cylindrical storage tank at 100 lbf/in.2 Initially, saturated liquid occupies 1.6 ft3. The valve at the top of the tank develops a leak, allowing saturated vapor to escape slowly. Eventually, the volume of the liquid drops to 0.6 ft3. If the pressure in the tank remains constant, determine (a) the mass of refrigerant that has escaped, in lb, and (b) the heat transfer, in Btu. PLEASE USE THE...

A cylindrical glass tank with a diameter of 8.6 cm and a height of 25 cm...

A cylindrical glass tank with a diameter of 8.6 cm and a height of 25 cm is inverted and inserted into another tank of water. If no air is allowed to escape from the glass container when submerged, what is the height of the air column in the glass tank when its edge is 2.0 m below the surface of the water?

A cylindrical tank with inner diameter 2.0 m is designed to operate as a fluidized bed...

A cylindrical tank with inner diameter 2.0 m is designed to operate as a fluidized bed reactor for a heterogeneous catalytic reaction. The tank is loaded with a random packing of cubic particles to a height of 4.0 m with voidage 0.4 before the fluidization process. The density and length of each side of the cubic particles are 2600 kg m-3 and 1.0 cm respectively. During operation, a liquid reactant with density 1000 kg m-3 and viscosity 1.0 x 10-3...

A closed and elevated vertical cylindrical tank with diameter 2.00m contains water to a depth of...

A closed and elevated vertical cylindrical tank with diameter 2.00m contains water to a depth of 0.900m . A worker accidently pokes a circular hole with diameter 0.0190m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of5.00�103Pa at the surface of the water. Ignore any effects of viscosity. A. Just after the hole is made, what is the speed of the water as...

A closed and elevated vertical cylindrical tank with diameter 2.10 m contains water to a depth...

A closed and elevated vertical cylindrical tank with diameter 2.10 m contains water to a depth of 0.500 m . A worker accidently pokes a circular hole with diameter 0.0170 m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103 Pa at the surface of the water. Ignore any effects of viscosity. A)Just after the hole is made, what is the speed...

10) A shower pipe at the beach that is 10 cm in diameter carries water (density...

10) A shower pipe at the beach that is 10 cm in diameter carries water (density 1000 kg/m3 ) up a height of 2.0 m, at which point the pipe narrows to 5 cm and continues another 0.50 m up before the water squires out of the pipe 2.5 m above where it started. Ignore viscosity. a) If the water moves at 1.5 m/s in the wider part of the pipe, what is its speed in the narrower part of...

A cylindrical air tank has dimensions diameter = 0.2m and height 0.8m. an attached pressure gage...

A cylindrical air tank has dimensions diameter = 0.2m and height 0.8m. an attached pressure gage reads 200 kPa and the temperature is 27 celcius. an electrical heater is energized inside and it raises the temperature to 147 celius in 2 minutes. Calculate the mass of air in the tank (kg) (have to use ideal gas law, molecular weight of air)

A 5.0 mm diameter proton beam carries a total current of 1.5mA. The current density in...

A 5.0 mm diameter proton beam carries a total current of 1.5mA. The current density in the proton beam, which increases with distance from the center, is given by J = Jedge(r/R), where R is the radius of the beam and Jedge is the current density at the edge. I calculated that 9.375 x 10^15 protons are delivered by the proton beam each second, but I do not know where to start in calculating the value of Jedge. I am...

Question