A small block with mass 0.0400 kg is moving in the xy-plane. The net force on...

A small block with mass 0.0400 kg is moving in the xy-plane. The net force on the block is described by the potential- energy function U(x,y)= (5.90 J/m2 )x2-(3.90 J/m3 )y³.

a- What is the magnitude of the acceleration of the block when it is at the point x= 0.29 m , y= 0.66 m ?

b- What is the direction of the acceleration of the block when it is at the point x= 0.29 m , y= 0.66 m ?

Solutions

Expert Solution

genius_generous answered 8 months ago

Next > < Previous

Related Solutions

A small block with mass 0.0400 kg slides in a vertical circle of radius 0.500 m...

A small block with mass 0.0400 kg slides in a vertical circle of radius 0.500 m on the inside of a circular track. During one of the revolutions of the block, when the block is at the bottom of its path, point A, the magnitude of the normal force exerted on the block by the track has magnitude 4N . In this same revolution, when the block reaches the top of its path, point B, the magnitude of the normal...

A block of mass m = 3.5 kg is on an inclined plane with a coefficient...

A block of mass m = 3.5 kg is on an inclined plane with a coefficient of friction μ1 = 0.23, at an initial height h = 0.46 m above the ground. The plane is inclined at an angle θ = 42°. The block is then compressed against a spring a distance Δx = 0.11 m from its equilibrium point (the spring has a spring constant of k1 = 39 N/m) and released. At the bottom of the inclined plane...

A block with a mass of 3.2 kg is pulled by a force of 60 N...

A block with a mass of 3.2 kg is pulled by a force of 60 N up a ramp with a coefficient of kinetic friction of .05 on a 12° incline. a. What is the magnitude of the block’s acceleration? b. Draw a free body diagram of this block.

5. A loop of wire (whose plane is in the xy plane), is moving in the...

5. A loop of wire (whose plane is in the xy plane), is moving in the +x direction through a uniform B-field (5.0 T, directed into the xy plane...ie., along the -z axis). What is direction of the induced current in the loop? a. Clockwise when viewed from the front b. Counterclockwise when viewed from the front c. The current direction alternates back and forth in the loop d. There is no induced current in the loop 6. Refer to...

A block of mass m1 = 3.27 kg on a frictionless plane inclined at angle ?...

A block of mass m1 = 3.27 kg on a frictionless plane inclined at angle ? = 31.2

Read: A block, with mass 1.17 kg sitting on an incline plane at 5.20° with a...

Read: A block, with mass 1.17 kg sitting on an incline plane at 5.20° with a friction coefficient, ??=0.450, is attached to another freely hanging block that weighs 2.01 kg. A pulley with mass, .423 kg, is between them with a radius of .0810m. Task: Calculate the translational acceleration of the system. List: Givens, Principle of Physics used, and Solve

A block of mass m= 5.00-kg is moving to the right with a speed of v=...

A block of mass m= 5.00-kg is moving to the right with a speed of v= 2.00 m/son a horizontal,frictionless surface. The block encounters a relaxed(that is, neither compressed nor extended)spring with spring constant k= 2,000.00 N/m. a.What is the kinetic energy of the block before hitting the spring? b.What is the kinetic energy of the block when the spring is at maximum compression? c.How much energy is stored in the spring at maximum compression? d.How far does the spring...

A block of mass m1 = 2.20 kg initially moving to the right with a speed...

A block of mass m1 = 2.20 kg initially moving to the right with a speed of 3.10 m/s on a frictionless, horizontal track collides with a spring attached to a second block of mass m2 = 4.7 kg initially moving to the left with a speed of 1.5 m/s.The spring constant is 528 N/m. What if m1 is initially moving at 3.6 m/s while m2 is initially at rest? (a) Find the maximum spring compression in this case. x...

A block of mass m1 = 2.3 kg initially moving to the right with a speed...

A block of mass m1 = 2.3 kg initially moving to the right with a speed of 4.8 m/s on a frictionless, horizontal track collides with a spring attached to a second block of mass m2 = 3.5 kg initially moving to the left with a speed of 2.7 m/s. The spring constant is 580N/m. What if m1 is initially moving at 3.6 m/s while m2 is initially at rest? (a) Find the maximum spring compression in this case. x...

A block of mass m1 = 2.9 kg initially moving to the right with a speed...

A block of mass m1 = 2.9 kg initially moving to the right with a speed of 4.3 m/s on a frictionless, horizontal track collides with a spring attached to a second block of mass m2 = 5 kg initially moving to the left with a speed of 2.8 m/s as shown in figure (a). The spring constant is 572 N/m. What if m1 is initially moving at 2.2 m/s while m2 is initially at rest? (a) Find the maximum...

Subjects