Question

In: Chemistry

Part A: What mass of silver would plate onto the cathode if a current of 7.7...

Part A: What mass of silver would plate onto the cathode if a current of 7.7 A flowed through the cell for 64 min ?

t=___ s?

Part B: How much time would it take for 318 mg of copper to be plated at a current of 5.0 A ?

t=___ s?

Part C:What mass of silver would plate onto the cathode if a current of 7.7 A flowed through the cell for 64 min ?

Solutions

Expert Solution

queen_honey_blossom answered 1 year ago
Next > < Previous

Related Solutions

Part A What mass of calcium can be produced by this process if a current of...
Part A What mass of calcium can be produced by this process if a current of 6300 A is applied for 39 h ? Assume that the electrolytic cell is 65 % efficient. Part A What mass of calcium can be produced by this process if a current of 6300 A is applied for 39 h ? Assume that the electrolytic cell is 65 % efficient. Part B What is the minimum voltage needed to cause the electrolysis? Part B...
A molecular compound contains 92.3% carbon and 7.7% hydrogen by mass. What is the empirical formula...
A molecular compound contains 92.3% carbon and 7.7% hydrogen by mass. What is the empirical formula of this compound? If 0.592 mol of the compound weighs 30.78g, what is its molecular formula?
1. How would you calculate the atomic mass of an atom of silver (Ag)?
 Respond to the following based on your reading. 1. How would you calculate the atomic mass of an atom of silver (Ag)? 2. The element chlorine (CI) has 17 protons and 17 electrons. What happens to an atom of chlorine (CI) if it gains an electron? 3. How does an atom differ from a molecule? 4. How do protons, neutrons, and electrons differ? 5. The element lithium (Li) has 3 protons and 3 electrons. The element fluorine (F) has 9 protons and 9 electrons. An...
What mass in grams of a 10.0% by mass aqueous silver nitrate solution must be added...
What mass in grams of a 10.0% by mass aqueous silver nitrate solution must be added to 100.0 mL of an aqueous solution that is 0.0250 M in chromium (II) chloride and 0.0200 M in chromium (III) chloride to precipitate all chloride ion as silver chloride from solution?
What mass in grams of a 10.0% by mass aqueous silver nitrate solution must be added...
What mass in grams of a 10.0% by mass aqueous silver nitrate solution must be added to 100.0 mL of an aqueous solution that is 0.0250 M in chromium (II) chloride and 0.0200 M in chromium (III) chloride to precipitate all chloride ion as silver chloride from solution?
a)What is the mass (in grams) of the solid product when 7.5 g of silver nitrate...
a)What is the mass (in grams) of the solid product when 7.5 g of silver nitrate reacts in solution with excess sodium carbonate?AgNO3(aq) + Na2CO3(aq) --> Ag2CO3(s) + NaNO3(aq) [unbalanced] b)What is the mass (in grams) of the precipitate when 7.62 g of silver nitrate reacts in solution with excess sodium phosphate?AgNO3(aq) + Na3PO4(aq) --> Ag3PO4(s) + NaNO3(aq) [unbalanced]
NOTE: What would the anwser be if it was a square plate with a circular hole?...
NOTE: What would the anwser be if it was a square plate with a circular hole? The metallic, circular plate of diameter D and thickness t, has a concentric hole of diameter h in its middle, as shown. Metal density is ? = 8000 kg/m3 ; D = 5 cm. 1) When h = 0 (no hole), determine the maximum thickness t [in mm] so that the plate can stay afloat on the surface of water at 20°C. 2) The...
What type and gauge of suture would be used to anastomose a synthetic aortic graft onto...
What type and gauge of suture would be used to anastomose a synthetic aortic graft onto an aorta during an abdominal aortic aneurysmectomy?
Using the Faraday equation. What current and time are needed to plate a 1 mm thick...
Using the Faraday equation. What current and time are needed to plate a 1 mm thick layer of copper onto an object with a surface area of 0.1m2 ? The density of copper is 8940 kg/m3 , its atomic weight is M = 63.5 kg/kmol and copper ions have a valence of z = 2.
The density of a 10 kg cube of silver is 10.5 g/cm3. What would the density...
The density of a 10 kg cube of silver is 10.5 g/cm3. What would the density of a 5 kg cube of silver be? I thought the answer would be 5.25 g/cm^3 because m1/m2=p1/p2 so 10kg/5kg=10.5 g/cm^3/ x and you solve for x. But this is coming up as wrong and I don't know why, do i need to convert the kg to g???
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT