Question

In: Physics

A laser beam shines along the surface of a block of transparent material. (See the figure...

A laser beam shines along the surface of a block of transparent material. (See the figure .) Half of the beam goes straight to a detector, while the other half travels through the block and then hits the detector. The time delay between the arrival of the two light beams at the detector is 6.25 ns. And has a length of 2.50 m

Solutions

Expert Solution

Concepts and reason

The concept required to solve the given problem is velocity of the light in the medium and time taken by the light to travel a distance.

Initially, derive the expression for calculating time taken by light to travel distance (d) in air and in the block and finally index of refraction of the material will be calculated.

Fundamentals

Index of refraction is defined as the ratio of the speed of light in medium 1 and the speed of light in medium 2.

The expression for the index of refraction is,

n=v1v2n = \frac{{{v_1}}}{{{v_2}}}

Here, n is the index of refraction of medium 2 with respect to medium 1, v1 is the speed of light in medium 1 and v2 is the speed of light in medium 2.

The velocity of light in the block is,

cb=cn{c_b} = \frac{c}{n}

Here, cb{c_b} is the velocity of light in block, c is the speed of light in vacuum, and n is the refractive index of the material of the block.

The time taken by light to travel a distance d is,

t=dvt = \frac{d}{v}

Here, d is the distance traveled by the object and v is the velocity of the object.

Time taken by light to light to travel a distance (d) in air is,

ta=dc{t_a} = \frac{d}{c} …… (1)

Here, ta is the time taken by light to travel a distance d in air, d is the distance covered by light, and c is the speed of light in air.

Time taken by light to travel a distance (d) in the block is,

tb=dcb{t_b} = \frac{d}{{{c_b}}}

Here, d is the distance covered by light, cb is the velocity of light in block and tb is the time taken by light to travel a distance (d) in the block.

Substitute cn\frac{c}{n} for cb{c_b}.

tb=ndc{t_b} = \frac{{nd}}{c} …… (2)

From equations (1) and (2), time delay between arrivals of the two light beams at the detector is,

tbta=ndcdc=(n1)dc\begin{array}{c}\\{t_b} - {t_a} = \frac{{nd}}{c} - \frac{d}{c}\\\\ = \left( {n - 1} \right)\frac{d}{c}\\\end{array}

Rearrange the above equation as follows:

(n1)=c(tbta)d\left( {n - 1} \right) = \frac{{c\left( {{t_b} - {t_a}} \right)}}{d}

Substitute 6.25×109s6.25 \times {10^{ - 9}}{\rm{ s}} for (tbta)\left( {{t_b} - {t_a}} \right), 2.50 m for d, and 3×108m/s3 \times {10^8}{\rm{ m/s}} for c.

(n1)=(3×108m/s)(6.25×109s)2.50m=0.75n=1.75\begin{array}{c}\\\left( {n - 1} \right) = \frac{{\left( {3 \times {{10}^8}{\rm{ m/s}}} \right)\left( {6.25 \times {{10}^{ - 9}}{\rm{ s}}} \right)}}{{2.50{\rm{ m}}}}\\\\ = 0.75\\\\n = 1.75\\\end{array}

Ans:

The index of refraction of material is 1.75.


Related Solutions

A beam of light from a monochromatic laser shines into a piece of glass. The glass...
A beam of light from a monochromatic laser shines into a piece of glass. The glass has thickness L and index of refraction n=1.5 . The wavelength of the laser light in vacuum is L/10 and its frequency is f In this problem, neither the constant c nor its numerical value should appear in any of your answers. (1)How long does it take for a short pulse of light to travel from one end of the glass to the other?
Red laser light with a wavelength of 633 nm shines on a surface with destructive interference...
Red laser light with a wavelength of 633 nm shines on a surface with destructive interference for that wavelength. The surface will appear: 1. white. 2. violet. 3. red. 4. black.
A monochromatic, unpolarized beam of laser light is incident on a polarizer that is aligned along...
A monochromatic, unpolarized beam of laser light is incident on a polarizer that is aligned along the vertical direction. The light has a wavelength of 355 nm. Explain in a complete sentence what fraction of the incident light passes through the polarizer? If the light coming out of this polarizer passes through a second polarizer that is rotated at an angle of 45o with respect to the first polarizer, what fraction of the original laser light will come out of...
The block of mass M in the following figure slides on a frictionless surface. (Figure 1)
The block of mass \(\mathrm{M}\) in the following figure slides on a frictionless surface. (Figure 1) Find an expression for the tension in the string. Express your answer in terms of the variables \({m},{M}\), and appropriate constants.
A block of mass ? slides along a frictionless surface with a speed ? and collides...
A block of mass ? slides along a frictionless surface with a speed ? and collides with a stationary block of mass 2? . After the collision the block of mass ? rebounds with a speed of ?⁄2. What is the greatest speed ???? that the block of mass 2? can have after the collision?
A laser beam with vacuum wavelength 582 nm is incident from air onto a block of...
A laser beam with vacuum wavelength 582 nm is incident from air onto a block of Lucite as shown in the figure below. The line of sight of the photograph is perpendicular to the plane in which the light moves. Take θ1 to be 60°. Recall that the index of refraction of air is 1 and Lucite is 1.50. (a) Find the speed of the light in Lucite.. m/s (b) Find the frequency of the light in Lucite.. Hz (c)...
A block of mass m = 98 kg slides along a horizontal surface. The coefficient of...
A block of mass m = 98 kg slides along a horizontal surface. The coefficient of friction between the block and the surface is μk = 0.38. The block has an initial speed of vo = 13 m/s in the positive x-direction as shown. a) write an expression for x-component of the frictional force the block experiences, F(f), in terms of the given variables and variables available in the palette b) what is the magnitude of the frictional force in...
Speed deamplifier. In the figure block 1 of mass m1 slides along an x axis on...
Speed deamplifier. In the figure block 1 of mass m1 slides along an x axis on a frictionless floor at speed 3.96 m/s. Then it undergoes a one-dimensional elastic collision with stationary block 2 of mass m2 = 2.08 m1. Next, block 2 undergoes a one-dimensional elastic collision with stationary block 3 of mass m3 = 3.86 m2. (a) What then is the speed of block 3? Are (b) the speed, (c) the kinetic energies, and (d) the momentum of...
Speed deamplifier. In the figure block 1 of mass m1 slides along an x axis on...
Speed deamplifier. In the figure block 1 of mass m1 slides along an x axis on a frictionless floor at speed 4.65 m/s. Then it undergoes a one-dimensional elastic collision with stationary block 2 of mass m2 = 4.95 m1. Next, block 2 undergoes a one-dimensional elastic collision with stationary block 3 of mass m3 = 5.53 m2. (a) What then is the speed of block 3? Are (b) the speed, (c) the kinetic energies, and (d) the momentum of...
A block of mass m = 1.0 kg sliding along a rough horizontal surface is traveling...
A block of mass m = 1.0 kg sliding along a rough horizontal surface is traveling at a speed v0 = 10.0m/s when it strikes a massless spring head-on (see figure) and compresses the spring a maximum distance X =0.25m. If the spring has stiffness constant k = 100. N/m, determine the coefficient of kinetic friction between block and surface.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT