part a) When a 5.0-μF capacitor is connected to a generator whose rms output is 31...

part a) When a 5.0-μF capacitor is connected to a generator whose rms output is 31 V, the current in the circuit is observed to be 0.25 A. What is the frequency of the source? (answer must be in Hz)

part b) An inductor has a 58.4-Ω reactance when connected to a 60.0-Hz source. The inductor is removed and then connected to a 47.0-Hz source that produces a 115-V rms voltage. What is the maximum current in the inductor? (answer must be in A)

part c) A sinusoidal voltage

Δv = (50.0 V)sin(180t)

is applied to a series RLC circuit with

L = 50.0 mH,

C = 170.0 μF,

and

R = 50.0 Ω.

(a) What is the impedance of the circuit in Ω?

(b) What is the maximum current in the circuit in A?

Solutions

Expert Solution

Using various formula for given circuits,all values has been calculated.

genius_generous answered 10 months ago

Next > < Previous

Related Solutions

A 32.0-μF capacitor is connected to a 53.0-Ω resistor and a generator whose rms output is...

A 32.0-μF capacitor is connected to a 53.0-Ω resistor and a generator whose rms output is 30.0 V at 60.0 Hz. (a) Find the rms current in the circuit. ______ A (b) Find the rms voltage drop across the resistor. ______ V (c) Find the rms voltage drop across the capacitor. _______ V (d) Find the phase angle for the circuit. The voltage _______ leads ahead of lags behind the current by _____°.

A 40.0-uF capacitor is connected to a 50.0-ohm resistor and a generator whose rms output is...

A 40.0-uF capacitor is connected to a 50.0-ohm resistor and a generator whose rms output is 30.0 V at 60.0 Hz. Find... A) the rms current circuit B) the rms voltage drop across the resistor C) the rms voltage drop across the capacitor D) and the phase angle for the circuit Please Explain how to get these answers, Thankyou

A 0.50-μF and a 1.4-μF capacitor (C1 and C2, respectively) are connected in series to a...

A 0.50-μF and a 1.4-μF capacitor (C1 and C2, respectively) are connected in series to a 22-V battery. Part A: Calculate the potential difference across each capacitor. Part B: Calculate the charge on each capacitor. Part C: Calculate the potential difference across each capacitor assuming the two capacitors are in parallel. Part D: Calculate the charge on each capacitor assuming the two capacitors are in parallel.

A generator with an rms voltage of 130 V is connected in series to a resistor...

A generator with an rms voltage of 130 V is connected in series to a resistor 3.65 kΩ and a capacitor 3.00 μF . 1. At what frequency must this circuit be operated for the current to lead the voltage by 29.0 ∘? (Answer Hz) 2. Using the frequency found in part A, find the average power consumed by this circuit. (Answer in W) ------------------------------------------ A 1.6-m wire is wound into a coil with a radius of 3.2 cm. 1....

A 4.0 µF capacitor and a 5.0 µF capacitor are connected in series across a 1.5...

A 4.0 µF capacitor and a 5.0 µF capacitor are connected in series across a 1.5 kV potential difference. The charged capacitors are then disconnected from the source and connected to each other with terminals of like sign together. Find the charge on each capacitor (in mC) and the voltage across each capacitor (in V). (Due to the nature of this problem, do not use rounded intermediate values in your calculations—including answers submitted in WebAssign.) 4.0 µF capacitor charge 3.706mC...

An uncharged 2.51 μF capacitor is connected in series with a 6.25 kΩ resistor and an...

An uncharged 2.51 μF capacitor is connected in series with a 6.25 kΩ resistor and an emf source with 70.8 V and negligible internal resistance. The circuit is completed at t = 0. A-) Just after the circuit is completed, Find the rate at which electrical energy is being dissipated in the resistor? B-) At what value of tt is the rate at which electrical energy is being dissipated in the resistor equal to the rate at which electrical energy...

A parallel-plate capacitor with circular plates and a capacitance of 10.3 μF is connected to a...

A parallel-plate capacitor with circular plates and a capacitance of 10.3 μF is connected to a battery which provides a voltage of 11.2 V . What is the charge on each plate? How much charge would be on the plates if their separation were doubled while the capacitor remained connected to the battery? How much charge would be on the plates if the capacitor were connected to the battery after the radius of each plate was doubled without changing their...

An AC generator supplies an rms voltage of 230 V at 60.0 Hz. It is connected...

An AC generator supplies an rms voltage of 230 V at 60.0 Hz. It is connected in series with a 0.300 H inductor, a 4.30 μF capacitor and a 256 Ω resistor. What is the impedance of the circuit? What is the rms current through the resistor? What is the average power dissipated in the circuit? What is the peak current through the resistor? What is the peak voltage across the inductor? What is the peak voltage across the capacitor?...

An AC generator supplies an rms voltage of 230 V at 60.0 Hz. It is connected...

An AC generator supplies an rms voltage of 230 V at 60.0 Hz. It is connected in series with a 0.400 H inductor, a 3.40 μF capacitor and a 206 Ω resistor. What is the impedance of the circuit? Tries 0/20 What is the rms current through the resistor? Tries 0/20 What is the average power dissipated in the circuit? Tries 0/20 What is the peak current through the resistor? Tries 0/20 What is the peak voltage across the inductor?...

An AC generator supplies an rms voltage of 240 V at 50.0 Hz. It is connected...

An AC generator supplies an rms voltage of 240 V at 50.0 Hz. It is connected in series with a 0.350 H inductor, a 3.60 μF capacitor and a 211 Ω resistor. 1. What is the impedance of the circuit? 2. What is the rms current through the resistor? 3. What is the average power dissipated in the circuit? 4. What is the peak current through the resistor? 5. What is the peak voltage across the inductor? 6. What is...

Subjects