Question

In: Accounting

Dr. Alyx Hemmings is employed by Mesa Dental. Mesa Dental recently installed a computerized job-order costing...

Dr. Alyx Hemmings is employed by Mesa Dental. Mesa Dental recently installed a computerized job-order costing system to help monitor the cost of its services. Each patient is assigned a job number when he or she checks in with the receptionist. The receptionist-bookkeeper notes the time the patient enters the treatment area and when the patient leaves the area. This difference between the entry and exit times is the number of patient hours used and the direct labor time assigned to the dental assistant. (A dental assistant is constantly with the patient.) The direct labor time assigned to the dentist is 50 percent of the patient hours. (The dentist typically splits her time between two patients.)

The chart filled out by the dental assistant provides additional data that is entered into the computer. For example, the chart contains service codes that identify the nature of the treatment, such as whether the patient received a crown, a filling, or a root canal. The chart not only identifies the type of service but its level as well. For example, if a patient receives a filling, the dental assistant indicates (by a service-level code) whether the filling was one, two, three, or four surfaces. The service and service-level codes are used to determine the rate to be charged to the patient. The costs of providing different services and their levels also vary.

Costs assignable to a patient consist of materials, labor, and overhead. The types of materials used—and the quantity—are identified by the assistant and entered into the computer by the bookkeeper. Material prices are kept on file and accessed to provide the necessary cost information. Overhead is applied on the basis of patient hours. The rate used by Mesa Dental is $32 per patient hour. Direct labor cost is also computed using patient hours and the wage rates of the direct laborers. Dr. Hemmings is paid an average of $60 per hour for her services. Dental assistants are paid an average of $20 per hour. Given the treatment time, the software program calculates and assigns the labor cost for the dentist and her assistant; overhead cost is also assigned using the treatment time and the overhead rate.

The overhead rate does not include a charge for any X-rays. The X-Ray Department is separate from dental services; X-rays are billed and costed separately. The cost of an X-ray is $12 per film; the patient is charged $15 per film. If cleaning services are required, cleaning labor costs $35 per patient hour.

Glen Johnson, a patient (Job 267), spent 30 minutes in the treatment area and had a two-surface filling. He received two Novocaine shots and used three ampules of amalgam. The cost of the shots was $14 ($7 each). The cost of the amalgam was $6 per ampule. Other direct materials used are insignificant in amount and are included in the overhead rate. The rate charged to the patient for a two-surface filling is $110. One X-ray was taken.

Required:

1. Prepare a job-order cost sheet for Glen Johnson. If required, round your answers to the nearest cent. If an answer box does not require an entry, leave it blank.

Job-Order Cost Sheet
Job 267
MATERIALS DIRECT LABOR OVERHEAD
Kind Amount Employee Hrs. Rate Amount Hrs. Rate Amount
Novocaine $____ Dentist ____ $____ $_____ ____ $____ $____
Amalgam _____ Asst. ____ _____ ______ ____ _____ _____
Cost Summary
Direct materials $_____
Direct labor ______
Overhead ______
Total cost $_____

What is the cost for providing a two-surface filling?
$_____

What is the gross profit earned?
$____

2. Suppose that the patient time and associated patient charges are given for the following fillings:

1-Surface 2-Surface 3-Surface 4-Surface
Time 20 minutes 30 minutes 40 minutes 50 minutes
Charge $90 $110 $150 $175

Compute the cost for each filling and the gross profit for each type of filling. Assume that the cost of Novocaine is $14 for all fillings. Ampules of amalgam start at two and increase by one for each additional surface. Assume also that only one X-ray film is needed for all four cases. When required, round intermediate calculations and final answers to the nearest cent.


Type
Total Cost
per Filling
Gross Profit
per Filling
1-Surface $____ $____
2-Surface $____ $____
3-Surface $____ $____
4-Surface $____ $____

Solutions

Expert Solution


Related Solutions

Job Order Costing: Define job order costing. Compare and contrast job order costing with process costing....
Job Order Costing: Define job order costing. Compare and contrast job order costing with process costing. Trace the flow of costs through a job order costing system. Discuss manufacturing overhead and how it is applied. Why is the manufacturing overhead account adjusted at the end of the period?
Job-order costing:
Lueckenhoff Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $497,000, variable manufacturing overhead of $2.40 per direct labor-hour, and 70,000 direct labor-hours. The company has provided the following data concerning Job T498 which was recently completed: Number of units in the job 40 Total direct labor-hours 80 Direct materials $ 950 Direct labor...
What are job-order costing and process costing? What types of firms use job-order costing? Process costing?...
What are job-order costing and process costing? What types of firms use job-order costing? Process costing? Explain how overhead is assigned to production when a predetermined overhead rate is used. Assume that a company has decided not to allocate any support department costs to producing departments. Describe the likely behavior of the managers of the producing departments. Would this be good or bad? Explain why allocation would correct this type of behavior.
II. JOB ORDER COSTING (Chapter 19) a.Describe when the use of Job order costing would be...
II. JOB ORDER COSTING (Chapter 19) a.Describe when the use of Job order costing would be appropriate b. Prepare journal entries for the following transactions (explanations not required) 1. materials purchased 2. materials used 3. wages payable 4 - 7 actual overhead costs incurred 8.overhead allocation 9.transferring costs to finished goods (YOU WILL HAVE TO MAKE UP NUMBERS FOR THE JOURNAL ENTRIES)
Overhead Application and Job-Order Costing Heurion Company is a job-order costing firm that uses a plantwide...
Overhead Application and Job-Order Costing Heurion Company is a job-order costing firm that uses a plantwide overhead rate based on direct labor hours. Estimated information for the year is as follows: Overhead $789,000 Direct labor hours 100,000 Heurion worked on five jobs in July. Data are as follows: Job 741 Job 742 Job 743 Job 744 Job 745 Balance, July 1 $29,870 $55,215 $27,880 $0 $0 Direct materials $25,500 $39,800 $14,450 $13,600 $8,420 Direct labor cost $61,300 $48,500 $28,700 $24,500...
Job Order Costing: Wadadli Products uses a job-order costing system Overhead costs are applied to jobs...
Job Order Costing: Wadadli Products uses a job-order costing system Overhead costs are applied to jobs on the basis of machine-hours. At the beginning of the year, management estimated that 170,000 machine-hours would be required for the periods estimated level of production. The company also estimated $212,500 of fixed manufacturing overhead expenses for the coming period and variable manufacturing overhead of $1.50 per machine hour. Required: 1. Compute the company’s predetermined overhead rate. 2. Assume that during the year of...
Explain the similarity and difference between process costing and job-order costing.
Explain the similarity and difference between process costing and job-order costing.
Compare and contrast job-order and process costing systems. How can events in a job-order costing system affect financial statements?
Write a response to the following in a minimum of 500 words: The type of product a company produces affects the type of accounting system needed to determine product cost. The 2 most common types of costing systems are job-order costing and process costing. Compare and contrast job-order and process costing systems. How can events in a job-order costing system affect financial statements? How can events in a process costing system affect financial statements? Provide specific examples for each type.
Job Costs Using Activity-Based Costing Heitger Company is a job-order costing firm that uses activity-based costing...
Job Costs Using Activity-Based Costing Heitger Company is a job-order costing firm that uses activity-based costing to apply overhead to jobs. Heitger identified three overhead activities and related drivers. Budgeted information for the year is as follows: Activity Cost Driver Amount of Driver Materials handling $101,200 Number of moves 4,000 Engineering 142,400 Number of change orders 8,000 Other overhead 358,800 Direct labor hours 52,000 Heitger worked on four jobs in July. Data are as follows: Job 13-43 Job 13-44 Job...
Job Costs Using Activity-Based Costing Heitger Company is a job-order costing firm that uses activity-based costing...
Job Costs Using Activity-Based Costing Heitger Company is a job-order costing firm that uses activity-based costing to apply overhead to jobs. Heitger identified three overhead activities and related drivers. Budgeted information for the year is as follows: Activity Cost Driver Amount of Driver Materials handling $54,250 Number of moves 2,500 Engineering 120,700 Number of change orders 8,500 Other overhead 148,500 Direct labor hours 45,000 Heitger worked on four jobs in July. Data are as follows: Job 13-43 Job 13-44 Job...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT