One mole of ideal gas, initially at 50OC and 1 bar, is changed to 150oC and...

One mole of ideal gas, initially at 50^OC and 1 bar, is changed to 150^oC and 4bar by 2 different mechanically reversible processes as follows:

process 1: the gas is first heated at constant pressure until its temperature is 150^oC and then it is compressed isothermally to 4 bar

process 2:the gas is first compressed adiabatically to 4bar and then it is cooled at constant pressure to 150^OC

i)Assume C_v =2.5R and C_p=3.5R, estimate the heat(J) and work(J) for both processes

ii)Select the most energy efficient process.Justify your answer.

Expert Solution

Amanda K answered 2 years ago

One mole of an ideal monatomic gas initially at 300 K and a pressure of 15.0...

One mole of an ideal monatomic gas initially at 300 K and a pressure of 15.0 atm expands to a final pressure of 1.00 atm. The expansion can occur via any one of four different paths: a. isothermal and reversible, b. isothermal and irreversible, c. adiabatic and reversible, and d. adiabatic and irreversible. In irreversible processes, the expansion occurs against an external pressure of 1.00 atm. For each case, calculate the values of q, w, DU, and DH. I need...

One mole of an ideal monatomic gas is expanded from an initial state at 3 bar...

One mole of an ideal monatomic gas is expanded from an initial state at 3 bar and 450 K to a final state at 2 bar and 250 K. There are two different paths for this expansion: path 1: (1 mole ideal gas, 3 bar, 450 K) → (1 mole ideal gas, 3 bar, 250 K) → (1 mole ideal gas, 2 bar, 250 K) path 2: (1 mole ideal gas, 3 bar, 450 K) → (1 mole ideal gas,...

. An ideal gas initially contained at 1 bar and 25ºC, is compressed to a final...

. An ideal gas initially contained at 1 bar and 25ºC, is compressed to a final state of 5 bar and 25ºC. Although the initial and final temperatures are the same, the process is NOT isothermal. Rather, the change of state occurs in two steps. First, the gas is cooled at constant pressure (i.e., 1 bar). Second, the gas is heated at constant volume. Please calculate Q, W, DU, and DH for the two steps. Note: Cp*=29.1 J/mol/K, and 1...

25 pts) One mole of ideal, monatomic gas, initially at T = 250 K and pressure...

25 pts) One mole of ideal, monatomic gas, initially at T = 250 K and pressure 5.0 atm is: a) reversibly heated at constant pressure until its volume doubles b) reversibly heated at constant volume until its pressure doubles Determine w, q ,ΔU, ΔΗ , and ΔS for these two cases (20 pts). Can you calculate A and G for these two cases? Explain why. (5 pts)

5 moles of ideal gas is initially at 300 K and 5 bar. It is compressed...

5 moles of ideal gas is initially at 300 K and 5 bar. It is compressed to 10 bar at 300 K. This change is carried out by two different reversible processes: A: heating at constant volume followed by cooling at constant pressure B: cooling at constant pressure followed by heating at constant volume Depict these processes on a PT graph. (Hand drawn on engineering sheet would suffice). Calculate ΔU, ΔH, Q, and W requirements for each path. Cv=20.78 J/mol.K...

One mole of an ideal gas (CP/R=7/2), is compressed in a steady-flow compressor from 2.5 bar...

One mole of an ideal gas (CP/R=7/2), is compressed in a steady-flow compressor from 2.5 bar and 25°C to 6.5 bar and 120°C. The compressor rejects 0.5 kJ as heat to the surrounding at 293K. Calculate: 1. The enthalpy change of the gas (in kJ) 2. The entropy change of the gas (in J.mol-1) 3. The work required for the compression (in kJ) 4. The ideal work of the process (in kJ) 5. The thermodynamic efficiency The lost work (in kJ)

One mole of a diatomic (rigid rotator) ideal gas has an initial volume of 1 L...

One mole of a diatomic (rigid rotator) ideal gas has an initial volume of 1 L and temperature of 400 K (state A). First the gas undergoes an isometric process such that the final pressure is 4 times the initial pressure (state B). It then expands isothermally back to the initial pressure (state C). Then it is compressed isobarically back to its original state. 1. Draw a PV diagram illustrating the above cycle. On the diagram indicate where the 3...

One kg mole of an ideal gas is compressed isothermally at 127°C from 1 atm to...

One kg mole of an ideal gas is compressed isothermally at 127°C from 1 atm to 10 atm in a piston-and-cylinder arrangement. Calculate the entropy change of the gas, the entropy change of the surroundings, and the total energy change resulting from the process, if: (a) the process is mechanically reversible and the surroundings consist of a heat reservoir at 127°C. (b) the process is mechanically reversible and the surroundings consist of a heat reservoir at 27°C. (c) the process...

One mole of an ideal gas in an initial state P = 10atm, V = 5L,...

One mole of an ideal gas in an initial state P = 10atm, V = 5L, is taken reversibly in aclockwise direction around a circular path given by (V − 10)^2 + (P − 10)^2 = 25. Computethe amount of work done by the gas and the change in internal energy.

Consider a process in which one mole of a monatomic ideal gas is compressed from a...

Consider a process in which one mole of a monatomic ideal gas is compressed from a volume of V1 =1.459m3 to V2 =1m3 at a constant temperature of T =353.7 K. (a) What is the entropy change of the gas (in J/K units)? (b) What is the change in the value of PV for the gas (in J units)? (c) What is the energy change of the gas (in J units)? (d) What is the enthalpy change of the gas...

Question