Sketch the layout for a typical conventional wastewater
treatment plant. Label each process. Briefly describe pretreatment,...
Sketch the layout for a typical conventional wastewater
treatment plant. Label each process. Briefly describe pretreatment,
primary treatment, and secondary treatment and their basic
functions.
. Sketch the layout for a typical conventional surface water
treatment plant. Label each process. Briefly describe the different
water treatment processes and their basic functions.
A wastewater treatment plant that treats wastewater to secondary
treatment standards uses a primary sedimentation process followed
by an activated sludge process composed of aeration tanks and a
secondary clarifiers.
This problem focuses on the activated sludge process.
The activated sludge process receives a flow of 15 million
gallons per day (MGD).
The primary sedimentation process effluent has a BOD5 concentration
of 180 mgBOD5/L (this concentration is often referred as S). Before
flowing into the activated sludge process, the primary...
1-Describe the Secondary Anaerobic Digestor process in
wastewater treatment plant.
2-Describe the Nitrification Tower process in wastewater
treatment plant.
What is wastewater treatment?
what is the process of wastewater treatment?
why is wastewater treatment important?
No Plagiarism. Please Print essay format question
A wastewater treatment plant with activated-sludge process
treats wastewater for 120,000 m3/d. The effluent standard for both
BOD and TSS is 20 mg/L. Influent TSS concentration is 450 mg/L and
influent BOD concentration is 220 mg/L. MLSS concentration is 3500
mg/L (Assume no nitrification and temperature is 20°C). Determine:
(20 pts) (a) Influent BOD and TSS concentration to the aeration
tank if the treatment efficiencies in primary clarifier are 30% and
70% for BOD and TSS, respectively. (b) Determine sludge...
Draw a schematic of a typical WWTP treatment train, including
the major units for pretreatment, primary treatment, and secondary
treatment. Also, identify where solids are removed for the landfill
and sludge is removed for subsequent biosolids treatment. (8
pts)
Draw a schematic of a tertiary biological wastewater treatment
plant with individual process unit operations and processes and
identify the sources of sludge. Describe their characteristics and
possible treatment and management options.
A municipal wastewater treatment plant discharges 20,000 m3/d of
treated wastewater to a stream. The wastewater has a BOD5 of 30
mg/L with a k1 of 0.23 d-1. The temperature of the wastewater is 20
oC, and the dissolved oxygen is 2.0 mg/L. The stream just above the
point of wastewater discharge flows at 0.65 m3/s, has a BOD5 of 5.0
mg/L, and is 90% saturated with oxygen. The temperature of the
stream is also 20 oC. After mixing, the...