A pump has a displacement volume of 8 in3. It delivers 20 gpm at 800 rpm...

A pump has a displacement volume of 8 in3. It delivers 20 gpm at 800 rpm and 1100 psi. If the prime mover input torque is 2000 in · lb, a) What is the volumetric efficiency? b) What is the mechanical efficiency? c) What is the overall efficiency? d) What is the theoretical torque required to operate the pump?

Expert Solution

samet mamat answered 2 years ago

A centrifugal pump is driven at 1300 rpm by a 10 hp motor and delivers 250...

A centrifugal pump is driven at 1300 rpm by a 10 hp motor and delivers 250 GPM at 85 Fahrenheit water against 75 ft water head, assuming that the initial pump efficiency is 65 % doesn’t vary appreciably the maximum flow the pump can deliver is most nearly

•A hydraulic motor has a 22-in3 volumetric displacement. If it has a pressure rating of 1200...

•A hydraulic motor has a 22-in3 volumetric displacement. If it has a pressure rating of 1200 psi and it receives oil from a 15 gpm theoretical flow rate pump, find the motor a) speed, b) theoretical torque and c) theoretical horsepower.

Pump A has HA= -2.15E-4×GPM2+0.015 ×GPM + 250, and pump B has Hb= -2.95E-4×GPM2+0.020×GPM + 210....

Pump A has HA= -2.15E-4×GPM2+0.015 ×GPM + 250, and pump B has Hb= -2.95E-4×GPM2+0.020×GPM + 210. These two pumps are combined in parallel. What is the head produced by these pumps in parallel when the flow rate is 201 GPM?

An object has a measured volume of 800 cm3. It is tied to a string and...

An object has a measured volume of 800 cm3. It is tied to a string and fully submerged in water (density of water = 1000kgm3). The string exerts an upward force of 15.0N to keep the object still. Calculate the density of the object.

A centrifugal pump has the following characteristic: outer diameter of impeller 800 mm, width of impeller...

A centrifugal pump has the following characteristic: outer diameter of impeller 800 mm, width of impeller vanes at outlet 100 mm, angle of impeller vanes at outlet 40 o . The impeller runs at 550 rpm and delivers 0.98 m 3 /s of water under an effective head of 35 m. A 500 kW motor is used to drive the pump. Determine the manometric, mechanical and overall efficiencies of the pump. Assume water enters the impeller vanes radially at inlet....

A centrifugal water pump is driven at a speed of 1450 rpm. The pump impeller is of radial type and has an average radius of 50 mm at the vane inlet and a radius of 150 mm at the vane exit.

A centrifugal water pump is driven at a speed of 1450 rpm. The pump impeller is of radial type and has an average radius of 50 mm at the vane inlet and a radius of 150 mm at the vane exit. The vane width at inlet and exit are 25 and 10 mm respectively. The vane angles are ?1 = 500 and ?2 = 300. Assuming no prerotation at inlet and neglecting all sources of losses, determine a. the volume...

When operated at N = 1170 rpm, a centrifugal pump, with impeller D = 8in., has a shutoff head ho = 25.0 ft of water.

When operated at N = 1170 rpm, a centrifugal pump, with impeller D = 8in., has a shutoff head ho = 25.0 ft of water. At the same operating speed, best efficiency occurs at Q = 300 gpm, where the head is h = 21.9 ft of water. Fit these data at 1170 rpm with a parabola. Scale the results to a new operating speed of 1750 rpm. Plot and compare the results.

A sound wave in air at 20 Celsius has a frequency of 151 Hz and a displacement amplitude of...

A sound wave in air at 20 Celsius has a frequency of 151 Hz and a displacement amplitude of 5.40×10-3 mm.Part AFor this sound wave calculate the pressure amplitude (in Pa).Use 1.42×105 Pa for the adiabatic bulk modulus.Pmax= 2.11 PaPart BFind the intensity of the waveUse 1.20 kg/m^3 for the density of air.I=?

A 20-year bond has a current price of $800, a par-value of $1000, a coupon rate...

A 20-year bond has a current price of $800, a par-value of $1000, a coupon rate of 8% and pays quarterly. This bond is callable in 8 years. What is the current YTC of this bond?

A gas sample has a temperature of 20. ∘C with an unknown volume. The same gas...

A gas sample has a temperature of 20. ∘C with an unknown volume. The same gas has a volume of 449 mL when the temperature is 89 ∘C, with no change in the pressure and amount of gas. Part A What was the initial volume, in milliliters, of the gas? Express your answer using three significant figures.

Question