A pipe fitted with a closed valve connects two tanks. One tank contains a 5kg mixture...

A pipe fitted with a closed valve connects two tanks. One tank contains a 5kg mixture of 62.5 percent CO2 and 37.5 percent O2 on a mole basis at 30C and 125kpa. The second tank contains 10kg of N2 at 15C and 200kPa. The valve in the pipe is opened and the gases are allowed to mix. During the mixing process 100kJ of heat enrgy is supplied to the combined tanks. Determine the final pressure and temperature of the mixture and the total volume of the mixture.

Solutions

Expert Solution

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

A closed, rigid tank fitted with a paddle wheel contains 2.2 kg of air, initially at...

A closed, rigid tank fitted with a paddle wheel contains 2.2 kg of air, initially at 200oC, 1 bar. During an interval of 20 minutes, the paddle wheel transfers energy to the air at a rate of 1 kW. During this time interval, the air also receives energy by heat transfer at a rate of 0.5 kW. These are the only energy transfers. Assume the ideal gas model for the air, and no overall changes in kinetic or potential energy....

A branching pipe connects two storage tanks as shown in Figure Q3 below. Figure Q3 (a)...

A branching pipe connects two storage tanks as shown in Figure Q3 below. Figure Q3 (a) Write down the continuity equation as it applies to flows in the pipes 1, 2 and 3. [1 mark] (b) Write down the energy equation in terms of energy heads at A and at B and quantities relating to flow in the pipes in between. [2 marks] (c) What can be said about the energy loss in pipe 2 relative to that in pipe...

A rigid and closed steel tank with a volume of 86 dm 3 contains a mixture...

A rigid and closed steel tank with a volume of 86 dm 3 contains a mixture of saturated vapor and liquid at a quality and pressure of 0.9 and 20 bar respectively. Heat is removed from the system until it reaches 147 ° C. What is the volume of the saturated liquid phase at the end state?

Two tanks contain a mixture of water and alcohol with tank A contain- ing 500 L...

Two tanks contain a mixture of water and alcohol with tank A contain- ing 500 L and tank B 1000L. Initially, the concentration of alcohol in Tank A is 0% and that of tank B is 80%. Solution leaves tank A into B at a rate of 15 liter/min and the solution in tank B returns to A at a rate of 5 L/min while well mixed solution also leaves the system at 10 liter/min through an outlet. A mixture...

Two tanks contain a mixture of water and alcohol with tank A contain- ing 500 L...

A closed, rigid tank contains a two-phase liquid–vapor mixture of Refrigerant 22 initially at -20°C with...

A closed, rigid tank contains a two-phase liquid–vapor mixture of Refrigerant 22 initially at -20°C with a quality of 47.50%. Energy transfer by heat into the tank occurs until the refrigerant is at a final pressure of 6 bar. a) Determine the final temperature, in °C. b) If the final state is in the superheated vapor region, at what temperature, in °C, does the tank contain only saturated vapor?

Consider two interconnected tanks. Tank 1 initial contains 40 L (liters) of water and 160 g...

Consider two interconnected tanks. Tank 1 initial contains 40 L (liters) of water and 160 g of salt, while tank 2 initially contains 20 L of water and 250 g of salt. Water containing 20 g/L of salt is poured into tank1 at a rate of 2 L/min while the mixture flowing into tank 2 contains a salt concentration of 35 g/L of salt and is flowing at the rate of 2.5 L/min. The two connecting tubes have a flow...

A tank contains a mixture of water and salt, and at all times the solution is...

A tank contains a mixture of water and salt, and at all times the solution is kept will mixed. At time t = 0 there is 10 Liters solution in the tank, with no salt. However, being poured into the tank is a solution containing 2 grams of salt per liter, and it is entering at a rate of 5 liters per minute. Simultaneously we drain our tank at a rate of 3 liters per minute. Find the concentration of...

A closed and elevated vertical cylindrical tank with diameter 2.00m contains water to a depth of...

A closed and elevated vertical cylindrical tank with diameter 2.00m contains water to a depth of 0.900m . A worker accidently pokes a circular hole with diameter 0.0190m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of5.00�103Pa at the surface of the water. Ignore any effects of viscosity. A. Just after the hole is made, what is the speed of the water as...

A closed, rigid tank contains water initially at 250 °F with a quality of 0.4. The...

A closed, rigid tank contains water initially at 250 °F with a quality of 0.4. The tank is heated until the water reaches 290 °F. Find the initial and final pressure, in lbf/in2 . Sketch the process on P-υ and T-υ diagrams (be sure to include the vapor dome, constant temperature and pressure lines, number your states, and indicate the process direction with an arrow). Thermodynamic

Subjects