An AISI 1010 carbon steel plate of 1 by 1 m size and of 6 mm...

An AISI 1010 carbon steel plate of 1 by 1 m size and of 6 mm thickness is hung vertically after a heat treatment to 300°C uniform temperature. It is cooled by ambient air at 20°C flowing parallel to the plate in transverse direction.

a) Considering both forced and natural convection, for 8 m/s transverse air velocity, determine the rate of heat transfer from the plate and the corresponding instantaneous rate of change of the plate temperature.

b) For the transverse air velocities in 1-15 m/s range, plot the heat transfer coefficients from the plate associated with forced convection, natural convection and mixed convection on the same graph.

Expert Solution

samet mamat answered 2 years ago

A low-carbon steel plate is 270 mm wide and 25 mm thick. It is reduced in...

A low-carbon steel plate is 270 mm wide and 25 mm thick. It is reduced in one pass in a two‑high rolling mill to a thickness of 20 mm. Roll radius = 300 mm, and roll speed = 30 m/min. Strength coefficient = 500 MPa, and strain hardening exponent = 0.25. Determine (a) roll force, N (b) roll torque, N-m and (c) power required to perform the operation kW.

3c) List and explain why AISI 1050 Plain Carbon Steel is more prone to cracking and...

3c) List and explain why AISI 1050 Plain Carbon Steel is more prone to cracking and distortion as compared to AISI 01 Tool Steel during hardening heat treatment. remarks: For the question above, shouldn’t it be the other way round? AISI 01 Tool steel have higher hardenability so quenching in water will crack in comparision to plain carbon steel that has low hardenability so it requires fast cooling. Need help with this, thanks.

A plain carbon steel ball 2 mm in diameter is heated to 1200 K in an...

A plain carbon steel ball 2 mm in diameter is heated to 1200 K in an oven and then cooled slowly in ambient air at 300 K. The convection heat transfer coefficient between air and this steel ball is 20 W / (m2 * K). You can find the density, specific heat and thermal conductivity from the property tables attached in text book with reasonable assumptions. Please derive an equation estimating the changes of the temperature of this ball with...

A person drops a cylindrical steel bar (?=9.0×1010 Pa) from a height of 1.00 m (distance...

A person drops a cylindrical steel bar (?=9.0×1010 Pa) from a height of 1.00 m (distance between the floor and the bottom of the vertically oriented bar). The bar, of length ?=0.73 m, radius ?=0.75 cm, and mass ?=1.70 kg, hits the floor and bounces up, maintaining its vertical orientation. Assuming the collision with the floor is elastic, and that no rotation occurs, what is the maximum compression of the bar?

Two Jupiter-size planets are released from rest 7.00×1010 m apart. What are their speeds as they...

Two Jupiter-size planets are released from rest 7.00×1010 m apart. What are their speeds as they crash together?

The conductivity of carbon is about 3*(10^4) S/m. a. What size and shape sample of carbon...

The conductivity of carbon is about 3*(10^4) S/m. a. What size and shape sample of carbon has this conductance? (Conductance is equal to 1/R). b. What is the conductance if every dimension of the sample found in (a) is cut in half?

A specimen of concrete column (200 x 200 mm) of 1.5 m long with 4 steel...

A specimen of concrete column (200 x 200 mm) of 1.5 m long with 4 steel rebars (20 mm in diameter) inside with same length. If Ec = 21 Gpa, Es = 210 GPa, and free shrinkage strain = 0.0004, estimate the force carried by concrete and steel after shrinkage. If concrete tensile strength, ft = 5 MPa, will crack develop in this specimen?

In a galvanised steel water supply line 100 m long and 50 mm in diameter, water...

In a galvanised steel water supply line 100 m long and 50 mm in diameter, water is pumped from a reservoir to a vented storage tank at an elevation 8 m above it. The following fittings are use: 1 hinged foot valve with strainer, 3 x 90? elbows, 2 gate calves (open), 20 screwed sockets, 1 sudden exit. The water viscosity is 1 x 10-6 m2/s and the density is 1000 kg/m3. (a) Calculate the friction factor at a flow...

Air at 15°C flows at 9 m/s parallel to a thin flat plate measuring 260 mm...

Air at 15°C flows at 9 m/s parallel to a thin flat plate measuring 260 mm × 390 mm. The direction of flow is parallel to the 260-mm edges. The surface of the plate is at a uniform temperature of 85°C. The plate is in a large chamber with walls at a temperature of 22°C. The emissivity of the plate’s surfaces is 0·75. (a) Determine the rate of convective heat transfer from one side of the plate to air. [16]...

Using the Faraday equation. What current and time are needed to plate a 1 mm thick...

Using the Faraday equation. What current and time are needed to plate a 1 mm thick layer of copper onto an object with a surface area of 0.1m2 ? The density of copper is 8940 kg/m3 , its atomic weight is M = 63.5 kg/kmol and copper ions have a valence of z = 2.

Question