An induction machine has four poles and is powered by two three-phase sources. The first feeds...

An induction machine has four poles and is powered by two three-phase sources. The first feeds the stator at 60 Hz and the second feeds the rotor at 180 Hz. Knowing that the rotor rotates in the same direction as the stator field, we ask: a) Does the machine work as a brake, motor or generator? b) What is the slip value? c) What is the angular speed of the rotating field of the rotor in relation to the stator? d) What is the angular speed of the rotating field of the stator in relation to the rotor?

Expert Solution

Manojponduru answered 1 year ago

A three phase 10kW, 1700rpm, 60Hz, four poles, Y connected induction motor has a no-load speed...

A three phase 10kW, 1700rpm, 60Hz, four poles, Y connected induction motor has a no-load speed of 1750rpm. The rotational mechanical losses are constant and equal to 500W. The core losses are constant and equal to 300W. The copper losses in the stator equal to the copper losses in the rotor at full load. If the rotor resistance per phase is 0.25?, calculate the following: a.The frequency of the induced current in the rotor circuit at full load. b.The percentage...

A three-phase line has an impedance of 1 + j2 Ω per phase. The line feeds...

A three-phase line has an impedance of 1 + j2 Ω per phase. The line feeds two balanced three-phase loads that are connected in parallel. The first load is Y-connected and has an impedance of 20+j40 Ω per phase. The second load is ∆-connected and has an impedance of 30-j60 Ω per phase. The line-to-line voltage at the load end of the line is 415V. Taking the phase voltage Va as reference, determine: a) The total current per phase from...

A three-phase line has an impedance of 1 + j3 Ω per phase. The line feeds...

A three-phase line has an impedance of 1 + j3 Ω per phase. The line feeds a balanced delta-connected load, which absorbs a total complex power of 12 + j5 kVA. The line voltage at the load end has a magnitude of 300 V. Calculate the magnitude of the line voltage at the source end.The magnitude of the line voltage at the source end is ____ V.

Chapters three and four are a review of your training from the first phase of your...

Chapters three and four are a review of your training from the first phase of your principles of microeconomics. The supply and demand framework supposes the application of pure competition and all of its assumptions. Thus its conclusions are the result of these assumptions. discuss the potential managerial problems of analyzing a real world market while only considering the nature of said market to be purely competitive.

Electric Machinery What are the advantages of using three-phase induction motor as compared to single phase...

Electric Machinery What are the advantages of using three-phase induction motor as compared to single phase induction motors? please write it with long details and with clear written

The following test data apply to a 110 kVA, 2300 V three-phase four-pole 60 Hz induction...

The following test data apply to a 110 kVA, 2300 V three-phase four-pole 60 Hz induction motor. No load test at rated voltage and frequency: Load current = 8.1 A, Three-phase power = 3025 W Blocked-rotor test at rated current and 15 Hz: Line voltage = 268 V, Three-phase power = 10.2 kW Stator resistance between line terminals = 2.34 Ω. Compute the stator current and power factor, kW output, and eﬃciency when this motor is operating at rated voltage...

A 6-pole and three-phase induction motor has synchronous speed of (1000) RPM. a) Find the no-load...

A 6-pole and three-phase induction motor has synchronous speed of (1000) RPM. a) Find the no-load and full-load operating speed of motor for the cases given, 1. 2.5Hz electrical frequency of rotor for no-load condition. 2. 6.3Hz electrical frequency of rotor for full-load condition. b) Find the speed regulation of motor by using parameters found above. c) Determine the electrical frequency of rotor under full-load condition so that speed regulation would be equal to 5%? (Electrical frequency of rotor for...

A three-phase, 11.2-kW, 1750-rpm, 460-V, 60-Hz, four-pole, Y-connected induction motor has the following parameters: Rs =...

A three-phase, 11.2-kW, 1750-rpm, 460-V, 60-Hz, four-pole, Y-connected induction motor has the following parameters: Rs = 0.53 Ω, R’r = 0.38 Ω, Xs = 1.23 Ω, X’r = 1.45 Ω, and Xm = 25.2 Ω. The motor is controlled by varying both the voltage and frequency. The volts/hertz ratio, which corresponds to the rated voltage and rated frequency, is maintained constant. a) Calculate the maximum torque, Tm and the corresponding speed, ꞷm for 60 Hz and 30 Hz. b) Repeat...

A 3 phase 450V (line-to-line), 1150rpm induction machine has the following equivalent circuit parameters. R1=0.33 Ohms,...

A 3 phase 450V (line-to-line), 1150rpm induction machine has the following equivalent circuit parameters. R1=0.33 Ohms, X1=1.3Ohms R2 = 0.25 Ohms X2 = 40Ohms. Determine the following: a) Rated stator current (per-phase) b) Input power factor c) Total power across the air gap d) The full-load torque e) Magnitude of the starting current

A stable system has four zeros and four poles given by zeros: z = ± 1,...

A stable system has four zeros and four poles given by zeros: z = ± 1, ±j and poles: z = ± 0.9, ±j0.9. It is also known that the frequency response function H(e^jω) evaluated at ω=π/4 is equal to 1, i.e., H(e^jπ/4)=1 a. Determine the transfer function H(z), and indicate the region of convergence. b. Determine the difference equation representation.

Question