Question
In: Mechanical Engineering
A pot with boiling water at 100 C, if the handle is 3 mm thick, 22...
A pot with boiling water at 100 C, if the handle is 3 mm thick, 22 mm wide, 300 mm long and exposed tp 19 C temp, h= 5 w/m2 c.
What is the temp at the end of the handle if it is k= 13, and then if it was k = 180 W/m.k
What kind of assumptions
Does insulation need to be on the intire handle from being burned why?
Solutions
samet mamat answered 2 years agoRelated Solutions
A pot of hot water is boiling on your stove. The pot is in the shape of...
A pot of hot water is boiling on your stove. The pot
is in the shape of a round cylinder made of aluminum which is 10 cm
in radius. The aluminum is 3 mm thick. You
notice that after 22
minutes, 0.13 kg of water
has boiled away.
A. What is the temperature of the inner surface of the bottom of
the pot?
B. How much energy is required to boil away M kg of water?
C. What is the difference in temperature...
A student conducts an experiment boiling water in a 3.96L pot. The Diameter of the base...
A student conducts an experiment boiling water in a 3.96L pot.
The Diameter of the base of the pot is 7-3/4” and the height is
5-1/8”.
2 Liters of water @ 23°C takes 17 minutes before it reaches a boil.
It has a height in the pot of 2-3/4”. The process took 1 hour and
13 minutes to boil dry. How much energy was required to do
this?
A student conducts an experiment boiling water in a 3.96L pot. The Diameter of the base...
A student conducts an experiment boiling water in a 3.96L pot.
The Diameter of the base of the pot is 7-3/4” and the height is
5-1/8”.
2 Liters of water @ 23°C takes 11 minutes to boil. 500mL of
water at 23°C are added to the boiling water. Producing 3-1/4”
height of water and 88°C mixture temperature. It then takes till
11:29 for the water mixture to resume boiling. The whole operation
takes 1 hour and 26 minutes from start...
100 grams of boiling water (temperature 100
100 grams of boiling water (temperature 100
A pot of water is boiling under one atmosphere of pressure. Assume that heat enters the...
A pot of water is boiling under one atmosphere of pressure.
Assume that heat enters the pot only through its bottom, which is
copper and rests on a heating element. In two minutes, the mass of
water boiled away is m = 3.5 kg. The radius of the pot bottom is R
= 10.0 cm and the thickness is L = 1.0 mm. What is the temperature
of the heating element in contact with the pot?
A cast iron water pipe of 500 mm inside diameter and 20 mm thick, is supported...
A cast iron water pipe of 500 mm inside diameter and 20 mm
thick, is supported over a span of 10 meters. Find the maximum
bending stress in the pipe metal, when the pipe is running full.
Take density of cast iron = 70.6 kN/m3 and water = 9.8 kN/m3
judy places 0.150kg of boiling water at 100° C in a thermos bottle. how many kilograms...
judy places 0.150kg of boiling water at 100° C in a
thermos bottle. how many kilograms of ice at -12.0°C must judy add
to the thermos so that the equilibrium temperature of the water is
75.0°C?
A young boy, age 2 years, pulled a pot of boiling water over his head, arms,...
A young boy, age 2 years, pulled a pot of boiling water over his
head, arms, and chest, resulting in a mixed burn to the anterior
surface of his head and arms, chest, and feet.
Discuss the pathophysiology to the manifestations listed
above.
A young boy, age 2 years, pulled a pot of boiling water over his head, arms,...
A young boy, age 2 years, pulled a pot of boiling water over his
head, arms, and chest, resulting in a mixed burn to the anterior
surface of his head and arms, chest, and feet.
Discuss the factors that determine the classification of the
types of burns and determine what type(s) this victim probably has.
(See Classification of Burns.)
Discuss how the physicians in the emergency room will determine
the percentage of the body that may be burned and what...
A young boy, age 2 years, pulled a pot of boiling water over his head, arms,...
A young boy, age 2 years, pulled
a pot of boiling water over his head, arms, and chest, resulting in
a mixed burn to the anterior surface of his head and arms, chest,
and feet.
Discuss the additional effects associated with burns and the
treatments involved, which include shock, pain, electrolyte and
fluid imbalances, respiratory complications, infection, metabolic
problems, and anemia. (See Effects of Burn Injury.)
Discuss the actions to promote the healing of burns.
Specifically address the problems that...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- I am having trouble with my assignment and getting compile errors on the following code. The...
- Can someone show me how to write a Haskell function using snd on a list of...
- Please do in java Program 3: Give a baby $5,000! Did you know that, over the...
- This is all one question, thank you so much in advance! You must evaluate the purchase...
- 10. Consider a market in which there is a monopoly manufacturer and a mo nopoly retailer....
- Write a function fun(x) that takes as input a positive number x and solves the following...
- Describe the principles and operations of movement sensors: Doppler-Effect Velocity sensor and Spring-Mass Accelerometor; State the...
ADVERTISEMENT