Question
In: Physics
A pot of water is boiling under one atmosphere of pressure. Assume that heat enters the...
A pot of water is boiling under one atmosphere of pressure. Assume that heat enters the pot only through its bottom, which is copper and rests on a heating element. In two minutes, the mass of water boiled away is m = 3.5 kg. The radius of the pot bottom is R = 10.0 cm and the thickness is L = 1.0 mm. What is the temperature of the heating element in contact with the pot?
Solutions
genius_generous answered 2 years agoRelated Solutions
A pot of hot water is boiling on your stove. The pot is in the shape of...
A pot of hot water is boiling on your stove. The pot
is in the shape of a round cylinder made of aluminum which is 10 cm
in radius. The aluminum is 3 mm thick. You
notice that after 22
minutes, 0.13 kg of water
has boiled away.
A. What is the temperature of the inner surface of the bottom of
the pot?
B. How much energy is required to boil away M kg of water?
C. What is the difference in temperature...
Inventor jockey will in a way heat a pot of water by freezing one other amount...
Inventor jockey will in a way heat a pot of water by freezing
one
other amount of water.
a) He wants to heat 1.5 kg of water from 0.0 to 80.0 ºC in a closed
and well insulated
container. How much water at 0.0 ºC does he then have to
freeze?
b) Does the invention contradict the first theorem of
thermodynamics? Motivate your answer.
You have placed a copper pot with water to heat on the stove. After one minute...
You have placed a copper pot with water to heat on the stove.
After one minute you place your finger in the water and you are
okay. When you touch the pot your finger gets burned. Upload a
drawing of a molecular view of what the copper atoms and water
molecules look like at the beginning of heating the pot and after
the pot has been heated for 15 mins.
A student conducts an experiment boiling water in a 3.96L pot. The Diameter of the base...
A student conducts an experiment boiling water in a 3.96L pot.
The Diameter of the base of the pot is 7-3/4” and the height is
5-1/8”.
2 Liters of water @ 23°C takes 17 minutes before it reaches a boil.
It has a height in the pot of 2-3/4”. The process took 1 hour and
13 minutes to boil dry. How much energy was required to do
this?
A student conducts an experiment boiling water in a 3.96L pot. The Diameter of the base...
A student conducts an experiment boiling water in a 3.96L pot.
The Diameter of the base of the pot is 7-3/4” and the height is
5-1/8”.
2 Liters of water @ 23°C takes 11 minutes to boil. 500mL of
water at 23°C are added to the boiling water. Producing 3-1/4”
height of water and 88°C mixture temperature. It then takes till
11:29 for the water mixture to resume boiling. The whole operation
takes 1 hour and 26 minutes from start...
A pot with boiling water at 100 C, if the handle is 3 mm thick, 22...
A pot with boiling water at 100 C, if the handle is 3 mm thick,
22 mm wide, 300 mm long and exposed tp 19 C temp, h= 5 w/m2 c.
What is the temp at the end of the handle if it is k= 13, and
then if it was k = 180 W/m.k
What kind of assumptions
Does insulation need to be on the intire handle from being
burned why?
An insulated heat exchanger uses geothermal water to heat water for a chemical plant. Water enters...
An insulated heat exchanger uses geothermal water to heat water
for a chemical plant. Water enters the heat exchanger at a rate of
36 kg/s and is heated from 23 ∘∘C to 69 ∘∘C. The geothermal water
enters the exchanger at a rate of 41.4 kg/s and at an initial
temperature of 130 ∘∘C. The specific heat of the geothermal water
is 4.31 kJ/(kg K). Determine the rate of heat transfer between the
two streams and the rate of entropy...
A common cooking technique calls for adding salt to boiling water. Boiling requires heat to overcome...
A common cooking technique calls for adding salt to boiling
water. Boiling requires heat to overcome the molecular attractions
between water molecules so that they can “jump” into the air. After
hearing this you think of 2 reasons this might be: 1. saltwater
boils faster and 2. saltwater boils hotter. As a scientist, you are
hesitant to accept either idea without empirical evidence. Thus,
you plan to test these hypotheses by collecting two equivalent
pots, fill one with a liter...
Boiling of water in an open container is a constant pressure process. On earth water boils...
Boiling of water in an open container is a constant pressure
process. On earth water boils at 100 deg C (atmospheric pressure is
101.3 kPa). If we were to boil 2 kg of water on the surface of
Mars, how much energy (Q) do we need to supply? The ΔU for this
process is 4750 kJ. Specific volumes of water vapor and liquid are
206.00 and 0.00100 m3/kg, respectively.
Water has an unusually high specific heat, melting point, boiling point, and heat of vaporization as...
Water has an unusually high specific heat, melting point, boiling
point, and heat of vaporization as compared to compounds of similar
molar mass. Explain why.
Please show all work with the correct answer. Thank
you!!!!
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- This is all one question, thank you so much in advance! You must evaluate a proposal...
- X Company is considering the purchase of a new processor that costs $200,000. Shipping and setup...
- There are a large number of tasks involved in information technology and programming, and many of...
- Using one quantitative and one qualitative health policy research method described in this chapter, design a...
- What is the Rawls' solution to the age-old question of social (economic / distributive) justice?...
- St. Johns River Shipyards' welding machine is 15 years old, fully depreciated, and has no salvage...
- The following information is available for Robstown Corporation for 20Y8: Inventories January 1 December 31 Materials...
ADVERTISEMENT