Question

In: Accounting

EXEL This exercise illustrates some of the tradeoffs involved in determining the location and concentration of...

EXEL

This exercise illustrates some of the tradeoffs involved in determining the location and concentration of production.

A multinational corporation is considering three different production sites (P1, P2, P3) to manufacture a product that serves two markets M1 and M2, which have demands of 900 and 800 units respectively. The total volume of production equals the demand. In other words, the total production in all three sites should be 1,700 units. The maximum capacities for P1, P2, and P3 are 500, 500, and 1,000 units respectively (that means you have to use at least two production sites) and the question is how many units should the company manufacture in each location in order to minimize the cost?

Two elements have to be taken into account: the production cost and the transportation cost.

TOTAL COST = PRODUCTION COST + TRANSPORTATION COST

For the former, the economies of scale play an important role in determining the total cost of production: different ways of distributing the production among the three sites (the firm can also use two sites only) result in different production costs.

Once a certain distribution is considered, the transportation costs should also be calculated (in real life these costs are much more complex since they would include potential tariffs, customs clearance procedures, …): a production site could be very efficient from an economies of scale standpoint but far from the markets. The costs of shipping one unit of production from each production site to each market are shown in the table below:

M1

M2

P1

1.5

2

P2

0.5

1.8

P3

3.5

6

Solutions

Expert Solution


Related Solutions

Titration for Acetic Acid in Vinegar – Lab Report Assistant Exercise 1: Determining the Concentration of...
Titration for Acetic Acid in Vinegar – Lab Report Assistant Exercise 1: Determining the Concentration of Acetic Acid Data Table 1. NaOH Titration Volume Initial NaOH Volume (mL) Final NaOH Volume (mL) Total volume of NaOH used (mL) Trial 1 5.2 2.3 2.9 Trial 2 6.2 3.9 2.9 Trial 3 7.2 4.9 2.9 Average Volume of NaOH Used (mL) : 2.9 Data Table 2. Concentration of CH3COOH in Vinegar Average volume of NaOH used (mL) Concentration CH3COOH in vinegar (mol/L)...
1. What are the tradeoffs among on-site expansion, new location, and relocation? 2. Explain what the...
1. What are the tradeoffs among on-site expansion, new location, and relocation? 2. Explain what the purpose of assembly line balancing is and briefly describe    how it is done and supports the needs of product layout.
Exercise 1: Determining the Concentration of Acetic Acid Data Table 1. NaOH Titration Volume Initial NaOH...
Exercise 1: Determining the Concentration of Acetic Acid Data Table 1. NaOH Titration Volume Initial NaOH Volume (mL) Final NaOH Volume (mL) Total volume of NaOH used (mL) Trial 1 7ml 0 7 Trial 2 7ml 0.4 6.7 Trial 3 7ml 0.6 6.5 Data Table 2. Concentration of CH3COOH in Vinegar Average volume of NaOH used (mL) Concentration CH3COOH in vinegar (mol/L) % CH3COOH in vinegar 6.7 65mol/L 77% Questions: If the manufacturer of the vinegar used in the experiment...
A titration is a procedure for determining the concentration of a solution by allowing it to...
A titration is a procedure for determining the concentration of a solution by allowing it to react with another solution of known concentration (called a standard solution). Acid-base reactions and oxidation-reduction reactions are used in titrations. For example, to find the concentration of an HCl solution (an acid), a standard solution of NaOH (a base) is added to a measured volume of HCl from a calibrated tube called a buret. An indicator is also present and it will change color...
Exercise 7.2 This problem illustrates a consumer's decision to be homeless in the presence of a...
Exercise 7.2 This problem illustrates a consumer's decision to be homeless in the presence of a minimum housing-consumption constraint, imposed through misguided government regulation. Let c denote "bread" consumption and q denote housing consumption in square feet of floor space. Suppose that a unit of bread costs $1 and that q rents for $1 per square foot. The consumer's budget constraint is then c+q=y, where y is income, which equals $1,000 a month. A)Plot the budget line, putting q on...
Describes what is involved in determining if a research questionnaire is valid and reliable? if a...
Describes what is involved in determining if a research questionnaire is valid and reliable? if a selected sample distribution is appropriate?
There are a number of steps involved in determining the empirical formula of a compound. You...
There are a number of steps involved in determining the empirical formula of a compound. You will need to demonstrate that you can complete all of these steps as you determine the empirical formula of a compound composed of phosphorus and chlorine that is 14.87 % P by mass. Complete your calculations based on 100 g of this compound. Enter all calculated values in 4 significant figures followed by one space and the appropriate unit. Use g for grams and...
What concepts, ideas, and items are necessary in determining a location for a sporting event? What...
What concepts, ideas, and items are necessary in determining a location for a sporting event? What do you think is the most important
A method used by the Environmental Protection Agency (EPA) for determining the concentration of ozone in...
A method used by the Environmental Protection Agency (EPA) for determining the concentration of ozone in air is to pass the air sample through a "bubbler" containing sodium iodide, which removes the ozone according to the following equation: O3(g)+2NaI(aq)+H2O(l)→O2(g)+I2(s)+2NaOH(aq) Part A) How many moles of sodium iodide are needed to remove 5.95×10−6 mol O3? Part B) How many grams of sodium iodide are needed to remove 2.1 mg of O3?
You will be determining the concentration of cytochrome c based on the reduced Fe content. The...
You will be determining the concentration of cytochrome c based on the reduced Fe content. The calculation in the lab will determine mM of cytochrome c from your absorbance values. How will you convert this to mg/ml for the protein purification table? Show two sample calculations.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT