A hollow cylinder of ID 0.12 m and OD 0.14082 has a heat generation rate of...

A hollow cylinder of ID 0.12 m and OD 0.14082 has a heat generation rate of 5 × 106 W/m3.
The conductivity of the material is 30 W/mK. The outside surface is insulated and heat is
removed by convection over the inside surface by a fluid at 130°C with a convection coefficient
of 226.26 W/m2K. Determine the temperature on the outside surface.

Expert Solution

samet mamat answered 2 years ago

The paper rolls, shown in the figure below, are 0.9 m OD x 0.22 m ID...

The paper rolls, shown in the figure below, are 0.9 m OD x 0.22 m ID x 3.23 m long and have a density of 984 kg/m3 . The rolls are transferred from the machine conveyor (not shown) to the forklift truck by the V-linkage of the off-loading system, which isrotated through 90o by an air cylinder. The paper then rolls onto the waiting forks of the truck. Question: Assume that the crank arm is a solid rectangularsection. Working on...

Tomato soup is flowing through a double-pipe heat exchanger (3 cm ID, 4.2 cm OD), with...

Tomato soup is flowing through a double-pipe heat exchanger (3 cm ID, 4.2 cm OD), with saturated steam at 112°C on the outside of the pipe. The convective heat transfer coefficient between the soup to the pipe is 323 W/m2 K and the convective heat transfer coefficient between the steam to the pipe is very large. The thermal conductivity of the soup and pipe are 0.89 W/m K and 15.6 W/m K, respectively. 1. For this system: A. The overall...

There is uniformly charged hollow cylinder The cylinder has radius R, length L, and total charge...

There is uniformly charged hollow cylinder The cylinder has radius R, length L, and total charge Q. It is centered on the z-axis, with one end at z=−L/2 and the other at z=+L/2.We are interested in finding the electric field generated by the cylinder at a point P located on the z-axis at z=z0. -Consider a thin ring segment of the cylinder, located at height z and having thickness dz. Enter an expression for the charge dQ of the ring?...

A hollow cylinder (hoop) is rolling on a horizontal surface at speed v = 3.3 m/s...

A hollow cylinder (hoop) is rolling on a horizontal surface at speed v = 3.3 m/s when it reaches a 16 ? incline. How far up the incline will it go? How long will it be on the incline before it arrives back at the bottom?

Q1. Suppose a hollow cylinder made of SS 316 with the thermal conductivity of 16.26 W/m...

Q1. Suppose a hollow cylinder made of SS 316 with the thermal conductivity of 16.26 W/m K, has inner diameter and thickness of 0.4 and 0.03 m, respectively and length of 1 m. Find the outer diameter of the cylinder (in meter) Q2. Calculate the thermal energy generation, if the volumetric heat generation inside the cylinder equal to 2.2 x 10^5 W/m^3 Q3. If the outer diameter of cylinder is changed to 0.46 m and the cylinder is cooled by...

1. Suppose a hollow cylinder made of SS 316 with the thermal conductivity of 16.26 W/m...

1. Suppose a hollow cylinder made of SS 316 with the thermal conductivity of 16.26 W/m K, has inner diameter and thickness of 0.4 and 0.05 m, respectively and length of 1 m. Find the outer diameter of the cylinder (in meter) 2. Calculate the thermal energy generation, if the volumetric heat generation inside the cylinder equal to 2.1 x 10^5 W/m^3 3. If the outer diameter of cylinder is changed to 0.46 m and the cylinder is cooled by...

In an old-fashioned amusement park ride, passengers stand inside a 5.0-m-diameter hollow steel cylinder with their...

In an old-fashioned amusement park ride, passengers stand inside a 5.0-m-diameter hollow steel cylinder with their backs against the wall. The cylinder begins to rotate about a vertical axis. Then the floor on which the passengers are standing suddenly drops away! If all goes well, the passengers will "stick" to the wall and not slide. Clothing has a static coefficient of friction against steel in the range 0.62 to 1.0 and a kinetic coefficient in the range 0.40 to 0.70....

In an old-fashioned amusement park ride, passengers stand inside a 4.5-m-diameter hollow steel cylinder with their...

In an old-fashioned amusement park ride, passengers stand inside a 4.5-m-diameter hollow steel cylinder with their backs against the wall. The cylinder begins to rotate about a vertical axis. Then the floor on which the passengers are standing suddenly drops away! If all goes well, the passengers will "stick" to the wall and not slide. Clothing has a static coefficient of friction against steel in the range 0.65 to 1.0 and a kinetic coefficient in the range 0.40 to 0.70....

Estimate the heat loss rate from a person who can be approximated as a cylinder of...

Estimate the heat loss rate from a person who can be approximated as a cylinder of diameter 0.3 m and height 1.8 m. The (clothing) surface temperature is 23 °C and the cross wind flow velocity is 15 m/s. The ambient temperature is –23 °C. Neglect end effects from the cylinder. Assume steady state.

A very long conducting tube (hollow cylinder) has inner radius a and outer radius b. It...

A very long conducting tube (hollow cylinder) has inner radius a and outer radius b. It carries charge per unit length ?? where ? is a positive constant with units of C/m. A line of charge lies along the axis of the tube. The line of charge has charge per unit length +?. Part E Calculate the magnitude the electric field in terms of ? and the distance r from the axis of the tube for r>b. Express your answer...

Question