Question

In: Mechanical Engineering

Re-derive an expression for average NuL (= hLL/k) for flow over a flat plate by integrating...

Re-derive an expression for average NuL (= hLL/k) for flow over a flat plate by integrating the expression for average hL for a mixed BL. For Rex,cr, use 123456 (keeping the same sequence), and find the constant B (in Eq. 7.38). Also show that for Rex,cr = 500,000, B is indeed equal to 871.

eq. 7.38=> NuL=(0.037 ReL^(4/5)-B)Pr^(1/3)

0.6<=Pr<=60

Rex,c <= ReL <=108

Solutions

Expert Solution


Related Solutions

Heat & Mass Transfer Consider the flow of water over a flat plate at a film...
Heat & Mass Transfer Consider the flow of water over a flat plate at a film temperature of 25 °C. The plate is 10m long, and the Reynolds number at the end of the plate is 106. Determine: The free stream velocity Is the flow laminar or turbulent at the end of the plate? Is the flow laminar or turbulent at the mid-length? What is the average Nusselt number? What is the average heat transfer coefficient? What is the Nusselt...
a. Derive the expression for the capacitance of a parallel plate having two dielectric field. b....
a. Derive the expression for the capacitance of a parallel plate having two dielectric field. b. Write a short note on the magnetization of the following magnetic material? i. Diamagnetic ii. Paramagnetic iii. Ferromagnetic c. Derive the expression for torque developed in a rectangular closed circuit current (I) in a uniform field?
Consider the flow of a liquid metal past a flat plate (Pr << 1). We have...
Consider the flow of a liquid metal past a flat plate (Pr << 1). We have shown that for a constant wall teemperature, T_o, the Nusselt number is given by Nu = 0.564*(Re^1/2)*(Pr^1/2). Show that if the surface is not a constant temperature, but is instead providing a constant heat flux, that the Nusselt number becomes Nu = 0.886*(Re^1/2)*(Pr^1/2). Start with the following expression for the temperature profile within a semi-infinite body with a constant heat flux boundary condition T...
how to find surface temperature of the flat plate which is subjected to air flow from...
how to find surface temperature of the flat plate which is subjected to air flow from one side and constant temperature on the other side using Ansys fluent ?
Derive the exponential expression that describes the radioactive decay in the number of nucleotides, N over...
Derive the exponential expression that describes the radioactive decay in the number of nucleotides, N over a time, t. Give an example of another physical phenomenon which is described by an exponential relationship such as this. b) A radioactive nucleotide has a half-life of 20.0 years. What fraction of an initially pure sample of this nuclide will remain at the end of (i) 50.0 years, and (ii) 100.0 years. c) Give an account of nuclear binding energy, accompanied by a...
Derive a general expression for the average failure rate of a Weibull distribution between two point...
Derive a general expression for the average failure rate of a Weibull distribution between two point in time, t1 and t2.
Air flows over a 4 meter long flat plate at a velocity of 8 m/s. Using...
Air flows over a 4 meter long flat plate at a velocity of 8 m/s. Using a spreadsheet, calculate the boundary layer thickness and wall shear stress at 0.1 meter intervals along the plate. Do not plot the wall shear stress at x=0. Use a transition Reynolds number of 5 x 10^5 . (You will need to calculate Rex at each location to determine if the laminar or turbulent correlations should be used.) Generate a spreadsheet table that includes columns...
Air at 10°C and I atm flows over a flat plate (30 cm x100 cm) at...
Air at 10°C and I atm flows over a flat plate (30 cm x100 cm) at 20 m/s. The plate is maintained at 70°C. (a) calculate the boundary layer thikness at distances of 30 cm and 100 cm, (b) calculate the heat transfer from first 30 cm and from whole the plate.
consider the air flowing over a flat plate of length L=1m. air's propertis Density=1Kg/m^3 Cp=1000j/Kg*K viscosity=10^-5Kg/m*s...
consider the air flowing over a flat plate of length L=1m. air's propertis Density=1Kg/m^3 Cp=1000j/Kg*K viscosity=10^-5Kg/m*s k=0.1W/m*C If length is 0.5m, heat flux = 3000W/m^2 average heat flux =4500W/m^2 the plate temperature 20 degrees (a) whay is flow?(Laminar or Turburlent of mixed) (b) what is the possible range Air velocity? (c) relationship Temperature air and Velocity air
Consider the two-dimensional laminar boundary layer flow of air over a wide 15 cm long flat...
Consider the two-dimensional laminar boundary layer flow of air over a wide 15 cm long flat plate whose surface temperature varies linearly from 20°C at the leading edge to 40°C at the trailing edge. This plate is placed in an airstream with a velocity of 2 m/s and a temperature of 10°C. Numerically determine how the surface heat flux varies along the plate. Explain the results obtained with proper reasoning. Support your results with scaling analysis wherever possible.I need c++...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT