2. A sequential circuit has two pulse inputs, x1 and x2. The output of the circuit...

2. A sequential circuit has two pulse inputs, x1 and x2. The output of the circuit becomes 1 whenever the pulse sequence x1x1x2x2x2x1 is detected. The output then remains 1 for all subsequent x1 pulses until an x2 pulse occurs.

(a) Derive a minimal state table describing the circuit operation. (Here you need to define the states and then perform state reduction).

(b) Synthesize the circuit using SR latches in the master rank. (Here, you need to make state assignment, generate excitation table and then perform logic minimization)

Expert Solution

I answered the same question previously. I don't know why a similar question came again.

Manojponduru answered 1 year ago

A sequential circuit has two JK flip-flops A and B, two inputs r and y,...

A sequential circuit has two JK flip-flops A and B, two inputs r and y, and one output z. The flip-flop input equations and circuit output equation are \(\begin{aligned} J_{A} &=A^{\prime} x+B^{\prime} y & K_{A}=B x^{\prime} y^{\prime} \\ J_{B} &=A^{\prime} x y & K_{B}=A^{\prime}+B^{\prime} x \\ z &=A^{\prime} x^{\prime}+B^{\prime} y^{\prime} & \end{aligned}\)(a) Derive the simplified state equations for A and B. (b) Tabulate the state table. (c) Draw the state diagram of the çircuit.

Design a Moore sequential circuit that has an input X and an output Y. The circuit...

Design a Moore sequential circuit that has an input X and an output Y. The circuit detects the following sequence: 100 Your answer should include state diagram and state table. Hint. X= 0 1 0 1 0 0 0 1 1 1 0 0 1 0 1 Y= 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0

Design a sequential circuit with 2 JK flip-flops A and B, and 2 inputs, E...

Design a sequential circuit with 2 JK flip-flops A and B, and 2 inputs, E and x. the design must adhere to the following requirements: If E = 0, the circuit remains in the same state regardless of the value of x. When E = 1 and x = 1, the circuit goes through the state transitions from 00 to 01 to 10 to 11 back to 00 and repeats. When E = 1 and x = 0, the circuit goes through the...

X1(t) and x2(t) are two input sources. Design an OPAMP circuit which satisfies the output y(t):...

X1(t) and x2(t) are two input sources. Design an OPAMP circuit which satisfies the output y(t): y(t)= 2x1(t) - 3x2(t) +2V

Amy has utility function u (x1, x2) = min { 2(x1)^2x2, x1*(x2)^2 }. Derive Amy's demand...

Amy has utility function u (x1, x2) = min { 2*(x1)^2*x2, x1*(x2)^2 }. Derive Amy's demand function for x1 and x2. For what values (if any) of m, p1, and p2 are the goods gross complements or gross substitutes of each other?

1. Consider a firm that hires quantities x1 and x2 of inputs one and two, at...

1. Consider a firm that hires quantities x1 and x2 of inputs one and two, at prices w1 and w2. The production function is given by f(x1,x2) = x1x2. 1.1 Does the firm’s technology exhibits constant, decreasing, or increasing returns to scale? 1.2 Form the cost-minimization problem for this firm, find the associated first-order conditions, and the conditional demand functions. 1.3 Find the cost function for this firm. 1.4 Indicate whether this firm exhibits increasing, decreasing, or constant average total...

Suppose that a firm has the p production function f(x1; x2) = sqrt(x1) + x2^2. (a)...

Suppose that a firm has the p production function f(x1; x2) = sqrt(x1) + x2^2. (a) The marginal product of factor 1 (increases, decreases, stays constant) ------------ as the amount of factor 1 increases. The marginal product of factor 2 (increases, decreases, stays constant) ----------- as the amount of factor 2 increases. (b) This production function does not satisfy the definition of increasing returns to scale, constant returns to scale, or decreasing returns to scale. How can this be? (c)Find...

x1 + x2 - 2x4 = 2 x1 + x2 + 2x3 + 6x4 + x5...

x1 + x2 - 2x4 = 2 x1 + x2 + 2x3 + 6x4 + x5 = 8 −2x1 - 2x2 + x3 + 8x4 = −1 3x3 + 12x4 + 2x5 = 9 Let the linear system be given. a. Find the reduced row eelon form of the combined matrix (augmented matrix) of the system. b. Is the system consistent? If the system is consistent, find the overall solution of the system. c. Do all the solutions of the...

Nigella has the following utility function over two goods (x1, x2): U(x1, x2) = min {0.5x1,...

Nigella has the following utility function over two goods (x1, x2): U(x1, x2) = min {0.5x1, 3x2} a.What is the Nigella’s utility level if x1= 20 andx2= 3? b.Suppose P1= 1 andP2= 3(where P1is the price x1andP2is theprice of x2) and Nigella has an income of 18. What is Nigella’s budget constraint? Illustrate it in a graph c.Solve for the Nigella’s utility maximizing bundle of x1andx2.

Suppose that X1 and X2 are two random variables. Suppose that X1 has mean 1 and...

Suppose that X1 and X2 are two random variables. Suppose that X1 has mean 1 and variance 4 while X2 has mean 3 and variance 9. Finally, suppose that the correlation between X1 and X2 is 3/8. Denote Y = 2X1 − X2. (67) The mean of Y is (a) 1 (b) 4 (c) -2 (d) -1 (68) The variance of Y is (a) 25 (b) 4 (c) 9 (d) 16 (69) The standard deviation of Y is (a) 5...

Question