A series of volumetric flasks are being prepared for the analysis of mercury in the drinking...

A series of volumetric flasks are being prepared for the analysis of mercury in the drinking water supply using the method of standard addition. To prepare the flasks, 10 mL of drinking water and a varying amount of standard are added to each flask, and the flasks are brought to the 25.00mL mark on the volumetric flask.

The concentration of mercury standard used was 20.0 microgram/mL.

Please use the data tabulated below to provide the concentration of mercury in the drinking water, in units of micrograms/mL.

It is recommended to use Excel or similar software.

mL Mercury Standard Added	Signal
0.00	19.65
1.00	30.35
2.00	40.28
3.00	49.78
4.00	60.44
5.00	70.0

Expert Solution

Ans.

queen_honey_blossom answered 1 year ago

preparation of standars solutions for beer's law plot Obtain and clean four 50 ml volumetric flasks...

preparation of standars solutions for beer's law plot Obtain and clean four 50 ml volumetric flasks Obtain from side bench abut 15ml of stock fe2+ solution in a clean, dry 20ml beaker - recor concentration of this solution Rinse 1,3 and 5 ml pipets with stock fe2+ solution Pipet 1ml of stock fe2+ solution into a clean 50ml volumetric flask as well as the 3ml and 5ml in diffrernt 50ml volumetric flasks To all four volumetric flasks add 5ml saturated...

10 mL sample solution that contains arsenic each is filled into 5 100 mL-volumetric flasks. Then...

10 mL sample solution that contains arsenic each is filled into 5 100 mL-volumetric flasks. Then into the second volumetric flask until the fifth volumetric flask each added 5, 10, 15, and 20 mL standard solution 22.1 ppm of arsenic. Then water is added to all volumetric flasks until the volume reached the 100 mL mark. Then the absorbance of each solution is measured, with the data below. Calculate the content of As in sample. Standard (mL) Absorbance 0.00 0.156...

Exactly 1.00-mL aliquots of a solution containing phenobarbital were measured into 50.00-mL volumetric flasks and made...

Exactly 1.00-mL aliquots of a solution containing phenobarbital were measured into 50.00-mL volumetric flasks and made basic with KOH. The following volumes of a standard solution of phenobarbital containing 25 ppm of phenobarbital were then introduced into each flask and the mixture was diluted to volume: 0.00, 1.00, 2.00, 3.00, and 4.00 mL. The fluorescence of each of these solutions was measured with a fluorometer, which gave values of 33.6, 40.6, 47.6, 54.6, and 61.6, respectively. What is the concentration...

4) The Safe Drinking Water Act (SDWA) sets a limit for mercury-a toxin to the central...

4) The Safe Drinking Water Act (SDWA) sets a limit for mercury-a toxin to the central nervous system-at 0.002 ppm by mass. Water suppliers must periodically test their water to ensure that mercury levels do not exceed this limit. Suppose water becomes contaminated with mercury at twice the legal limit (0.004 ppm). How much of this water would have to be consumed for someone to ingest 50 mg of mercury? 5)A solution contains a mixture of pentane and hexane at...

During Part I of the water Analysis series, you prepared a Stock solution of Nitrate ion...

During Part I of the water Analysis series, you prepared a Stock solution of Nitrate ion containing 250.0 mg N/L. In the second part of this experiment, you will use this Stock solution to prepare four Standard solutions to be used to make a calibration plot. As described in the background information for this experiment, the concentration of Nitrogen in these standards should be between 1 and 10 mg N /L. A.) Describe HOW you are going to prepare a...

1. Samples of drinking water were analyzed for lead contamination. Analysis of the drinking water showed...

1. Samples of drinking water were analyzed for lead contamination. Analysis of the drinking water showed a lead concentration of 12.54 ppb. Analysis of a sample of the same drinking water spiked with 20.00 ppb lead gave a concentration of 29.63 ppb. Calculate the spike recovery. Is the method sufficiently accurate? 2. A chemical technician wants to verify the precision of an analytical procedure used to determine citric acid concentration in orange juice. She obtains 10.00 mL of a particular...

7. A volumetric analysis was completed on a water sample to determine the amount of carbonate...

7. A volumetric analysis was completed on a water sample to determine the amount of carbonate in the sample. (a) Initially, a 0.2123 g Na2CO3 sample required 15.76 mL of HCl to reach the end point of the titration. What is the molarity of the acid? What is this step referred to as? (b) A 23.05 mL volume of this titrant is needed to react completely with a 50.00 mL sample containing carbonate. What is the concentration reported as mg/L...

A certain crude oil shows the following ultimate analysis: C=87.1% and H2=12.9%. The volumetric analysis of...

A certain crude oil shows the following ultimate analysis: C=87.1% and H2=12.9%. The volumetric analysis of the dry flue gas resulting from the combustion of this oil shows CO2=12%, O2=4.6%, CO=0%, and N2=83.4% a. Theoretical Air-Fuel Ratio b. Actual Air Fuel Ratio c. Excess air in Percent

In a volumetric analysis experiment, a solution of sodium oxalate (Na2C2O4) in acidic solution is titrated...

In a volumetric analysis experiment, a solution of sodium oxalate (Na2C2O4) in acidic solution is titrated with a solution of potassium permanganate (KMnO4) according to the following balanced chemical equation: 2KMnO4(aq) + 8H2SO4(aq) + 5Na2C2O4(aq) → 2MnSO4(aq) + 8H2O(l) + 10CO2(g) + 5Na2SO4(aq) + K2SO4(aq) What volume of 0.0393 M KMnO4 is required to titrate 0.142 g of Na2C2O4 dissolved in 30.0 mL of solution? PICK ONE. A 27.0 mL B 10.8 mL C 30.0 mL D 1.45 mL E...

A series of object are being rotated. The same net torque is being applied to each...

A series of object are being rotated. The same net torque is being applied to each object. Rank the object in order of the resulting angular acceleration (1=lowest). ( ) A solid disk spinning about its center. Total mass is 0.5M and the radius is 2R. ( )An object consisting of two objects connected by a massless rod. Each object has a mass of 2M and is a distance R from the axis of rotation. ( )A solid disk spinning...

Question