Question

In: Mechanical Engineering

Describe all processes in Otto cycle and Diesel cycle and plot its P-v and T-s diagram...

Describe all processes in Otto cycle and Diesel cycle and plot its P-v and T-s diagram respectively

Solutions

Expert Solution

Otto cycle:

Otto cycle is the ideal cycle for the spark-ignition or gasoline engine. This air-standard Otto cycle is composed of four processes:

1-2: isentropic compression

2-3: isochoric heat addition or constant volume heat addition

3-4: isentropic expansion

4-1: isochoric heat rejection or constant volume heat rejection

Diesel cycle:

Diesel cycle is the ideal cycle for the compression-ignition engines. it is composed of following processes:

1-2: isentropic compression

2-3: isobaric heat addition

3-4: isentropic expansion

4-1: isochoric heat rejection


Related Solutions

Explain the Carnot engine cycle and plot its process on a) T-S diagram b) p-v diagram
Explain the Carnot engine cycle and plot its process on a) T-S diagram b) p-v diagram
Compare the Otto cycle, Diesel cycle, and Stirling cycle. a: Draw the P-v diagrams and label...
Compare the Otto cycle, Diesel cycle, and Stirling cycle. a: Draw the P-v diagrams and label all the processes. b: Draw the corresponding T-s diagrams for the three power cycles and label all the processes. c: Draw the corresponding T-v diagrams for the three power cycles and label all the processes. d: Discuss the similarity and the difference about their thermal efficiencies explicitly. e: Discuss how to improve the thermal efficiencies of the Otto cycle, the Diesel cycle, and the...
Calculus dictates that (∂U/∂V) T,Ni = T(∂S/∂V)T,Ni – p = T(∂p/∂T)V,Ni – p (a) Calculate (∂U/∂V)...
Calculus dictates that (∂U/∂V) T,Ni = T(∂S/∂V)T,Ni – p = T(∂p/∂T)V,Ni – p (a) Calculate (∂U/∂V) T,N for an ideal gas [ for which p = nRT/V ] (b) Calculate (∂U/∂V) T,N for a van der Waals gas [ for which p = nRT/(V–nb) – a (n/V)2 ] (c) Give a physical explanation for the difference between the two. (Note: Since the mole number n is just the particle number N divided by Avogadro’s number, holding one constant is equivalent...
For each problem, sketch the appropriate process diagram on a T-v, P-v or P-h diagram 1)...
For each problem, sketch the appropriate process diagram on a T-v, P-v or P-h diagram 1) Oil enters the outer tube of an insulated concentric tube heat exchanger at a temperature of 500k, and exits at a temperature of 400k. The mass flow rate of the oil is 5 kg/s, and the oil has a specific heat of Cp=1.91 kJ/kg*K. Saturated liquid water at 100 degrees celsius enters the inner tube, and exits at 100 degrees celsius with a quality...
For each problem, sketch the appropriate process diagram on a T-v, P-v, or P-h diagram 4.60...
For each problem, sketch the appropriate process diagram on a T-v, P-v, or P-h diagram 4.60 : Steam exiting the turbine of a power plant passes through the insulated shell-and-tube heat exchanger condenser. The mass flow rate of the steam is 145 kg/s, and the steam enters the heat exchanger as a saturated mixture with a quality of 0.95 at 20 kPa. The steam exits the condenser as a saturated liquid at 20 kPa. Liquid cooling water is used to...
Show that Cp = T(∂S/∂T)p and Cv = T(∂S/∂T)V
Show that Cp = T(∂S/∂T)p and Cv = T(∂S/∂T)V
4: Consider a vapor refrigeration cycle. a: Draw the T-s diagram of the reversed Carnot Cycle...
4: Consider a vapor refrigeration cycle. a: Draw the T-s diagram of the reversed Carnot Cycle and describe what kind of problem each process of the cycle has explicitly. (We use the mixture of liquid and vapor as its working fluid.) b: Draw a T-s diagram in the ideal refrigeration cycle and label each process explicitly. Write down the COP in terms of enthalpy. c: There are the multipurpose refrigeration system and the multistage refrigeration system to improve the ideal...
Using the thermodynamic cycles, explain the difference between the heat engine (Carnot cycle) and Otto and Diesel engines. Why do Diesel engines require different types of fuel than the regular Otto Engine?
Problem 5 CH5/5ptsUsing the thermodynamic cycles, explain the difference between the heat engine (Carnot cycle) and Otto and Diesel engines. Why do Diesel engines require different types of fuel than the regular Otto Engine?
An ideal Rankine cycle operates without superheat (wet cycle) as shown in the following T-s diagram....
An ideal Rankine cycle operates without superheat (wet cycle) as shown in the following T-s diagram. If saturated steam is expanded from 450 psia to steam with 5 % moisture, use the Mollier diagram and steam tables, as necessary, to determine the pump inlet temperature, in oF. State your answer to one decimal place.
In the context diagram for an order entry/sales (OE/S) system that includes the revenue cycle processes...
In the context diagram for an order entry/sales (OE/S) system that includes the revenue cycle processes up through the shipment of goods (but does not include billing the customer), which of the following items is least likely to be an external entity? the general ledger system the purchases/accounts payable/cash disbursements (P/AP/CD) system the carrier the inventory system the billing/accounts receivable/cash receipts (B/AR/CR) system
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT