Question

In: Mechanical Engineering

A gas turbine receives 10 kg/s of helium and expands it polytropically (n = 1.8) from...

A gas turbine receives 10 kg/s of helium and expands it polytropically (n = 1.8) from 1100K and 600 kPa to 100 kPa. Determine the power produced, the entropy change of the helium through the gas turbine (kW/K) and the entropy change of the surroundings (kW/K).

Solutions

Expert Solution


Related Solutions

A gas turbine receives 10 kg/s of helium and expands it polytropically (n = 1.8) from...
A gas turbine receives 10 kg/s of helium and expands it polytropically (n = 1.8) from 1100K and 600 kPa to 100 kPa. Determine the power produced, the entropy change of the helium through the gas turbine (kW/K) and the entropy change of the surroundings (kW/K). answer: 28,221 kW, 10.53 kW/K (Engineering thermodynamics)
Air enters the turbine of a gas turbine at 1400 kPa, 1400 K, and expands to...
Air enters the turbine of a gas turbine at 1400 kPa, 1400 K, and expands to 100 kPa in two stages. Between the stages, the air is reheated at a constant pressure of 350 kPa to 1400 K. The expansion through each turbine stage is isentropic. Determine: (b) the heat transfer for the reheat process, in kJ/kg of air flowing. (c) the increase in net work as compared to a single stage of expansion with no reheat.
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa,...
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa, 700°C and the other flow is 15 kg/s at 800 kPa, 500°C. The exit state is 10 kPa, with a quality of 96%. Calculate the efficiency of the turbine and the total power output.
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa,...
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa, 700°C and the other flow is 15 kg/s at 800 kPa, 500°C. The exit state is 10 kPa, with a quality of 96%. Find the total power out of the adiabatic turbine. Calculate the efficiency of the turbine
A steam turbine receives 8 kg/s of steam at 9 MPa, 650 C and 60 m/s...
A steam turbine receives 8 kg/s of steam at 9 MPa, 650 C and 60 m/s (pressure, temperature and velocity). It discharges liquid-vapor mixture with a quality of 0.94 at a pressure of 325 kPa and a velocity of 15 m/s. In addition, there is heat transfer from the turbine to the surroundings for 560 kW. Find the power produced by the turbine and express it in kW
An adiabatic gas turbine uses air to produce work. Air expands adiabatically from 600 kPa and...
An adiabatic gas turbine uses air to produce work. Air expands adiabatically from 600 kPa and 287 C to 90 kPa and 67 C. Take specific heats at room temperature (300 K). a) Find the isentropic efficiency of the turbine. b) Find the work produced by the turbine for a mass flow rate of 2.5 kg/s. c) If the mass flow rate of air is again 2.5 kg/s, find the entropy generation under steady conditions
An adiabatic steam turbine receives 50 kg/s of superheated steam at 5 MPa and 500oC. Steam...
An adiabatic steam turbine receives 50 kg/s of superheated steam at 5 MPa and 500oC. Steam exits the turbine with a pressure of 100 kPa. Determine the minimum exit quality and the maximum power output of the turbine in kW.
A steam turbine receives superheated steam at 18.0 kg/s, 500.°C, and 3.00 MPa and exhausts it...
A steam turbine receives superheated steam at 18.0 kg/s, 500.°C, and 3.00 MPa and exhausts it to 10 kPa with a quality of 96%. If the turbine is assumed to be internally reversible, determine the rate of heat loss from the turbine surface if the power output is 20.MW The surface temperature of the turbine is uniform at 350.°C, and the local environment (ground state) is taken to be saturated liquid water at T0 = 20.0°C. Neglect all flow stream...
A gas turbine expands air adiabatically at 1000 kPa and 550 ⁰C to 120 kPa and...
A gas turbine expands air adiabatically at 1000 kPa and 550 ⁰C to 120 kPa and 130⁰C. Air enters the turbine through a 0.25 m 2 opening with an aveage velocity of 45 m/s, and exhausts through a 1 m2 opening. Assume the air is ideal gas with constant specific heats. Take the constant pressure specific heat and gas constant of air as Cp= 1.05 kJ/(kg K) and R=0.287 kJ/(kg K), respectively. Determine; (a) the mass flow rate of air...
Air enters a turbine operating at steady state at 10 bar, 1200 K and expands to...
Air enters a turbine operating at steady state at 10 bar, 1200 K and expands to 0.8 bar. The turbine is well insulated, and kinetic and potential energy effects can be neglected. Assuming ideal gas behavior for the air, what is the maximum theoretical work that could be developed by the turbine in kJ per kg of air flow?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT