Question

In: Mechanical Engineering

1) A car is moving without slipping, it will have a point on its body that...

1) A car is moving without slipping, it will have a point on its body that has zero velocity. True or False?

2) When a wheel fixed at the center, rotates and accelerate in the same direction, which of the following is generated at a point on the edge of the wheel. - Radial acceleration - Tangential acceleration - Neither radial nor tangential acceleration - Both radial and tangential acceleration

3) If a circular disk is fixed at a point located on its edge and has an angular acceleration, its mass center will only have a rotational inertia and no linear acceleration. True or False?

4) Two cylinders, A and B, of the same size and mass roll down an inclined plane without slipping. Cylinder A has most of its mass concentrated at the rim, while cylinder B has most of its mass concentrated near the center. Which Cylinder will accelerate faster?

5) A wheel of radius 1m is spinning around its center with a constant angular velocity of 2rad/s. What is the tangential component of acceleration of a point located at the rim of the wheel?

6) If a rigid body is undergoing a curvilinear translation, the linear velocity of all the points on the body will be the same. True or False?

7) Consider a cart on a horizontal frictionless surface. Once the car has been given a push and released, what will happen to the cart? - Continue with constant acceleration - Slowly come to a stop - continue with decreasing acceleration - Continue with constant velocity - Immediately come to a stop

8) Consider two identical blocks of the same mass, one resting on a flat surface, and the other resting on an incline. For which case is the normal force greater?

9) The potential energy of a rigid body depends on - Weight of the body - Height at which it's placed - Both

10) A small car collides with a large truck. Which will experience the greater impact force? - Car - Truck - Both the same - Depends on the velocity of each - Depends on the mass of each

11) Two tug of war opponent each pull with a force of 160 N on opposite ends of the rope. What is the tension on the rope?

12) A wheel is rolling without slipping and traveling to the right. In which direction the friction force will act on the wheel? - To the right - To the left

13) When an elastic spring is deflected, its potential energy will depend on the original unstretched length of the spring. True or False?

14) A plate is placed in the x-y plane and a force is applied so that it rotates about the x-axis. Which mass moment of inertia is applicable: - About the x-axis - About the y-axis - About the x-axis

15) If a rigid body is in General Plane Motion ( with translation and rotation) it's kinetic energy is influenced by its mass moment of inertia. True or False?

Solutions

Expert Solution


Related Solutions

A disc and solid sphere are both rolling without slipping so that both have a kinetic...
A disc and solid sphere are both rolling without slipping so that both have a kinetic energy of 294. What is the translational kinetic energy of the disc ? What is the translational kinetic energy of the solid sphere ?
1. A solid uniform cylinder is rolling without slipping. What fraction of this cylinder's kinetic energy...
1. A solid uniform cylinder is rolling without slipping. What fraction of this cylinder's kinetic energy is rotational? (Note: the moment of inertia of a cylinder of mass M and radius R rotating about its central axis is 0.5MR2.) A 1/3 B 2/3 C 1/2 D 1/4 E 3/4 2. A public art installation consists of three 25-kg glass sculptures hung side-by-side with steel wires of length 1.00 m, 2.00 m and 3.00 m. If the wires all have the...
A 2.2 kg hoop 1.2 in diameter is rolling to the right without slipping on a...
A 2.2 kg hoop 1.2 in diameter is rolling to the right without slipping on a horizontal floor at a steady 2.6 rad/s. A uniform cylinder with its outer radius two times it’s inner radius with the same mass, same diameter as the hoop and also rolls without slipping with the same angular frequency. What is the ratio of rotational kinetic energies between the hoop and the uniform cylinder? What is the ratio of the rotational frequency between the hoop...
A bowling ball rolls without slipping up a ramp. If the speed at the bottom of...
A bowling ball rolls without slipping up a ramp. If the speed at the bottom of the ramp is 2.85 m/s and the height of the ramp is 0.525 m, what is the speed of the ball at the top of the ramp?
1. A hollow sphere (mass 2.75 kg, radius 19.9 cm) is rolling without slipping along a...
1. A hollow sphere (mass 2.75 kg, radius 19.9 cm) is rolling without slipping along a horizontal surface, so its center of mass is moving at speed vo. It now comes to an incline that makes an angle 25.6o with the horizontal, and it rolls without slipping up the incline until it comes to a complete stop. Find a, the magnitude of the linear acceleration of the ball as it travels up the incline, in m/s2. 2. At t =...
A wheel of radius r rolls to the right without slipping on a horizontal road. Its axle moves at a constant speed vaxle.
A wheel of radius r rolls to the right without slipping on a horizontal road. Its axle moves at a constant speed vaxle. (a) Find the velocities of points A, B, and C with respect to the axle. Express your answers in terms of vaxle and r, as needed. (b) Find the velocities of points A, B, and C with respect to the road. (c) Comment on the velocity of point C with respect to the road.
Consider a cylinder rolling, without slipping, on an inclined flat surface (a ramp) that forms an...
Consider a cylinder rolling, without slipping, on an inclined flat surface (a ramp) that forms an angle  = 30 º with respect to the horizontal direction. An external force F = 10 N parallel to the ramp is pushing the cylinder in the uphill direction, without creating any torque (that is, the force is acting directly on the center of mass of the cylinder). If the cylinder is released at a time t = 0 with a linear velocity...
A, A thin cylindrical shell is released from rest and rolls without slipping down an inclined...
A, A thin cylindrical shell is released from rest and rolls without slipping down an inclined ramp, a distance s, that makes an angle of θ with the horizontal. If the coefficient of friction is µK, what is the speed at the bottom of the ramp? 2, A force P pushes a block at an angle 30° from the vertical across the ceiling. There is a coefficient of kinetic friction, µk. What is the acceleration?
Problem: a unifiorm hoop of mass m and radius r rolls without slipping on a fixed...
Problem: a unifiorm hoop of mass m and radius r rolls without slipping on a fixed cylinder of radius R. if the hoop is stats rolling from rest on top of the bigger cylinder, use the method of Lagrange multipliers to find the point at which the hoop fall off the cylinder. Question: I know how to derive Lagrange equeation. but to use the method of Lagrange multipliers, i have to finde constrain. solution says that f1, f2 are constrain....
a 1m radius cylinder with a mass of 852.9 kg rolls without slipping down a hill...
a 1m radius cylinder with a mass of 852.9 kg rolls without slipping down a hill which is 82.1 meters high. at the bottom of the hill what friction of its total kinetic energy is invested in rotational kinetic energy
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT