Ugonna stands at the top of an incline and pushes a 100−kg crate to get it...

Ugonna stands at the top of an incline and pushes a 100−kg crate to get it started sliding down the incline. The crate slows to a halt after traveling 1.50 m along the incline. (a) If the initial speed of the crate was 1.85 m/s and the angle of inclination is 30.0°, how much energy was dissipated by friction? (b) What is the coefficient of sliding friction?

Expert Solution

genius_generous answered 1 year ago

Work on a sliding crate. A worker pushes a 47.0 Kg crate across a level horizontal...

Work on a sliding crate. A worker pushes a 47.0 Kg crate across a level horizontal floor by applying a constant force of exactly 150.0 N at an angle of 23.0 degrees below the horizontal. The crate begins at rest and ends 15.0m from where it started traveling at 2.6m/s A. What is the work done by the applied force as the crate moves across the floor? B What is the work done by the friction force as the crate...

A 31 kg crate full of fruits is placed on an incline that is 17◦ below...

A 31 kg crate full of fruits is placed on an incline that is 17◦ below the horizontal. The crate is connected to a spring that is anchored to a vertical wall, such that the spring is parallel to the surface of the incline. (a) If the crate was connected to the spring at equilibrium length, and then allowed to stretch the spring until the crate comes to rest, determine the spring constant. Assume that the incline is frictionless and...

1. A 31 kg crate full of fruits is placed on an incline that is 17◦...

1. A 31 kg crate full of fruits is placed on an incline that is 17◦ below the horizontal. The crate is connected to a spring that is anchored to a vertical wall, such that the spring is parallel to the surface of the incline. (a) If the crate was connected to the spring at equilibrium length, and then allowed to stretch the spring until the crate comes to rest, determine the spring constant. Assume that the incline is frictionless...

A crate of mass 10.3 kg is pulled up a rough incline with an initial speed...

A crate of mass 10.3 kg is pulled up a rough incline with an initial speed of 1.43 m/s. The pulling force is 93.0 N parallel to the incline, which makes an angle of 19.4° with the horizontal. The coefficient of kinetic friction is 0.400, and the crate is pulled 4.97 m. (a) How much work is done by the gravitational force on the crate? J (b) Determine the increase in internal energy (related to thermal energy, having the opposite...

A crate of mass 9.2 kg is pulled up a rough incline with an initial speed...

A crate of mass 9.2 kg is pulled up a rough incline with an initial speed of 1.42 m/s. The pulling force is 96N parallel to the incline, which makes an angle of 20.4 with the horizontal. The coefficient of kinetic friction is 0.400, and the crate is pulled 5.02 m. A) how much work is done by the gravitational force on the crate? B) determine the increase in internal energy of the crate-incline system owing to friction? C) how...

A crate of mass 11.0 kg is pulled up a rough incline with an initial speed...

A crate of mass 11.0 kg is pulled up a rough incline with an initial speed of 1.40 m/s. The pulling force is 102 N parallel to the incline, which makes an angle of 19.0° with the horizontal. The coefficient of kinetic friction is 0.400, and the crate is pulled 4.94 m. (a) How much work is done by the gravitational force on the crate? J (b) Determine the increase in internal energy of the crate–incline system owing to friction....

A factory worker pushes a 32.0 kg crate a distance of 4.3 m along a level...

A factory worker pushes a 32.0 kg crate a distance of 4.3 m along a level floor at constant velocity by pushing downward at an angle of 29 ? below the horizontal. The coefficient of kinetic friction between the crate and floor is 0.25. part a. What magnitude of force must the worker apply to move the crate at constant velocity? (N) part b. How much work is done on the crate by this force when the crate is pushed...

6.3: a factory worker pushes a 30 kg crate a distance of 4.5 m along a...

6.3: a factory worker pushes a 30 kg crate a distance of 4.5 m along a level floor at constant velocity by pushing horizontally on it. the coefficient of kinetic friction between the crate and the floor is 0.25. Suppose the worker in exercise 6.3 pushes downward at an angleof 300 below the horizontal (a) what magnitude of forcemust the worker apply to move the crate at constatnt velocity? (b)how mach work is done on the crate by this force...

A factory worker pushes a crate of mass 30.7 kg a distance of 5.00 m along...

A factory worker pushes a crate of mass 30.7 kg a distance of 5.00 m along a level floor at constant velocity by pushing horizontally on it. The coefficient of kinetic friction between the crate and floor is 0.26. a)What magnitude of force must the worker apply? b)How much work is done on the crate by this force? c)How much work is done on the crate by friction? d)How much work is done by the normal force? e)How much work...

a worker applies a horizontal force to the top edge of a crate to get it...

a worker applies a horizontal force to the top edge of a crate to get it to tip (rotate) forward. if the crate has a mass of 100kg and is 1.6m tall and 0.80 wide. assume gravity force is applied at the center of the crate, and that there is enough friction with the floor for crate not to slip, so the lower left rib of crate is the axis of rotation. what is the lever arm for the gravity...

Question