Question

In: Electrical Engineering

1.------------------Converts the electrical energy from the source into other form of energy. * a- Source b-...

1.------------------Converts the electrical energy from the source into other form of energy. *
a- Source
b- Load
c- Transmission system
2. The incandescent lamp is based on the-------------, in which solids and gases emit visible light when burning *
a- Principle of incandescence
b- Glowing
c- Filament
3. In 1908 Coolidge had developed a process to make tungsten --------- , or capable of being drawn into a wire without breaking. *
a- Highest melting point
b- Lightening system
c- Ductile
4. In 1878 British scientist ------------ invented the modern light bulb, which used carbon filaments in evacuated glass bulbs. *
a- Edison
b- Sir Joseph Wilson Swan
c- Coolidge
5. The___________ regulates the current round the circuit. *
a- Control
b- Source
c- Transmission system
6.______________ is any material that offers little resistance to the flow of an electric current. *
a- current
b- electrical conductor
c-absolute zero
7. A phenomenon known as ___________is observed when certain substances are cooled to a point near absolute zero. *
a- Superconductivity
b- Electricity
c- Solutions
8. The ___________for electrical applications would be a material that is absolutely non-conducting ; such a material does not exist. *
a- Free electrons
b- perfect insulator
c- germanium
9. In ordinary electric wiring,________ are commonly used as insulating sheathing for the wire itself. *
a- Plastics
b- Enamel
c- Glass
10. ___________are substances which provides an easy path for an electric current. All metals are conductors however some metals do not conduct well. *
a- Insulators
b- Conductors
c- Semiconductors
11. _________ are midway between conductors and insulators; under certain conditions they allow a current to flow easily but under others they behave as insulators. *
a- Insulators
b- Conductors
c- Semiconductors
12.___________is capacity of matter to perform work as the result of its motion or its position in relation to forces acting on it. *
a- Energy
b- Modulation
c- Resistance
13. A weight suspended from a cord has ___________due to its position, in as much as it can perform work in the process of falling. *
a- kinetic energy
b- potential energy
c- mechanical energy
14. If a gun is fired, the potential energy of the gunpowder is transformed into the _____________of the moving projectile. *
a- Magnetic energy
b- Kinetic energy
c- Thermal energy

Solutions

Expert Solution

1. Option C: Transmission System

Because transmission system transmits the signal from one place to another so it contains transducers at the receiver and sender ends which convert electrical energy from the source into other form of energy or vice-versa.

2. Option A: Principle of incandescent

The incandescent lamp is based on the principle of incandescence, in an incandescent type of object, a current is passed through a thin metal filament which causes the heating of filament until it glows which in result produces the visible light.

3.Option C: Ductile

ductility makes the material capable of being drawn into a wire without breaking and the work is done by Coolidge, who gradually transformed tungsten from a brittle and unworkable metal to a durable and ductile filament.

4. Option A: Edison

In 1978, Edison invented a carbonized bamboo filament which could last over 1200 hours.

5. Option A: Control

It can be rheostat, gate, switch whatever which can regulate the current in the circuit.

6. Option B: Electric Conductor

Conductor is a material having maximum conductance and little resistance which allows the current to flow through it with ease.


Related Solutions

The fuel cell just installed on campus converts energy from natural gas combustion into electrical work....
The fuel cell just installed on campus converts energy from natural gas combustion into electrical work. Consider the combustion of methane, the primary component of natural gas: CH4(g) + 2O2(g) → CO2(g) + 2H2O(l) a. Predict the change in the extent of reaction as the temperature is increased at constant total pressure. b. Predict the change in the extent of reaction as the total pressure is increased at constant temperature. c. Calculate the maximum theoretical non-expansion work that can be...
Why might a heat pump have an advantage over a space heater that converts electrical energy...
Why might a heat pump have an advantage over a space heater that converts electrical energy directly into thermal energy?
The synchronous generator or alternator is an electrical machine that converts the mechanical power from a...
The synchronous generator or alternator is an electrical machine that converts the mechanical power from a prime mover into an AC electrical power at a particular voltage and frequency. The synchronous motor always runs at a constant speed called synchronous speed. A three phase, 8 pole, synchronous Generator is coupled to a diesel engine running at 500 rpm. It supplies an induction motor which has a full load speed of 1440 rpm. Find the percentage slip and number of poles...
Nuclear fission and electrical energy Electrical energy currently produced by nuclear reactors is derived from the...
Nuclear fission and electrical energy Electrical energy currently produced by nuclear reactors is derived from the decay of 235 92U, through a process known as nuclear fission, whereby a slow-moving neutron is captured by the 235 92U nucleus, creating 236 92U. The uranium nucleus 236 92U is very unstable, and it will immediately decay into two lighter elements and release neutrons. Some of the neutrons will go on to destabilize other nuclei, creating a chain reaction. During fission reactions the...
1. Technological Advancement of other source of energy, 2.Environmental climate change in canada , 3.Changes in...
1. Technological Advancement of other source of energy, 2.Environmental climate change in canada , 3.Changes in the economic situation can contribute to buying decision of the consumer .How they are THREAT to the SOLAR PANEL INDUSTRY in canada
1. State constitutions: a. none of the other choices are correct b. are the highest form...
1. State constitutions: a. none of the other choices are correct b. are the highest form of law within each state c. must be approved by a two-thirds vote of Congress d. must be approved by state supreme courts e. tend to be much shorter than the U.S. Constitution 2. Administrative agencies can: a. all of the other specific choices are correct b. adjudicate violations of regulations c. supervise compliance with regulations d. none of the other specific choices are...
a)A reliable energy source during long space flights can be in the form of radioactive material....
a)A reliable energy source during long space flights can be in the form of radioactive material. One nuclide that has been used is 94238Pu which decays by α-decay. The half-life is 87.7 years. After how long time has the power changed from 5 kW to 4 kW? b) What are the differences between positron, electron, and proton? Discuss. c) What do you understand from photoelectric and Compton scattering interactions? Discuss.
Describe how a generator is used to provide electrical energy. Where does that energy come from?
Describe how a generator is used to provide electrical energy. Where does that energy come from?
Write a literature review from any article concerning the "conversion of kinetic energy to electrical energy"...
Write a literature review from any article concerning the "conversion of kinetic energy to electrical energy" make sure your literature review contains( name of research, problem statement,method,result/conclusion)
Describe how energy from sunlight is converted into chemical energy in the form of ATP. Be...
Describe how energy from sunlight is converted into chemical energy in the form of ATP. Be thorough.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT