Question

In: Mechanical Engineering

A disk with outer radius ro = 150 mm and inner radius ri = 25 mm...

A disk with outer radius ro = 150 mm and inner radius ri = 25 mm is press-fitted onto a shaft of radius 25.075 mm. Both members are steel with Young’s modulus, E = 205 GPa, Poisson’s ratio, ? = 0.29, and density, ? = 7845 kg·m-3. Determine and plot the radial and tangential stress distributions in the disk and shaft when it is rotating at 5000 rpm. Under the above conditions, what is the magnitude of the Von Mises stress at r = 100 mm?

Solutions

Expert Solution


Related Solutions

A spherical shell has in inner radius Ri and an outer radius Ro. Within the shell,...
A spherical shell has in inner radius Ri and an outer radius Ro. Within the shell, a total charge Q is uniformly distributed. Calculate: a) the charge density within the shell (if you cannot get this answer, you can proceed without it). b) the electric field strength E(r) outside the shell (r > Ro). c) the electric field strength inside the shell (r< Ri). d) the electric field within the shell (Ri < r < Ro) e) show that your...
Consider an aluminum annular disk with an outer radius 63.2 mm and inner radius 7.9 mm....
Consider an aluminum annular disk with an outer radius 63.2 mm and inner radius 7.9 mm. The mass of the disk is 464 grams (HINT: the parameters of the disk are the same as in the previous pre-lab). The disk is allowed to rotate on a frictionless table with the rotation axis at its center. The disk has a small pulley rigidly mounted at the top concentrically. The pulley's radius is 12.1 mm, and the mass of the pulley is...
A long straight cylindrical shell has an inner radius Ri and an outer radius R0.
A long straight cylindrical shell has an inner radius Ri and an outer radius R0. It carries a current I, uniformly distributed over its cross section. A wire is parallel to the cylinder axis, in the hollow region (r < Ri). The magnetic field is zero everywhere outside the shell (r > R0).We conclude that the wire: A) is on the cylinder axis and carries current I in the same direction as the current in the shell B) may be anywhere in...
A long, hollow, cylindrical conductor (inner radius 2.4 mm, outer radius 4.4 mm) carries a current...
A long, hollow, cylindrical conductor (inner radius 2.4 mm, outer radius 4.4 mm) carries a current of 45 A distributed uniformly across its cross section. A long thin wire that is coaxial with the cylinder carries a current of 24 A in the opposite direction. What is the magnitude of the magnetic field (a) 1.4 mm, (b) 2.6 mm, and(c) 4.7 mm from the central axis of the wire and cylinder?
3. Assume an annulus of inner radius r1 and outer radius r2. The inner surface is...
3. Assume an annulus of inner radius r1 and outer radius r2. The inner surface is at T1, the outer surface at T2, T1 > T2. Assume heat transfer between the surfaces by conduction, with a variable conductivity, k = a + bT, develop an expression for the temperature in the material of the annulus.
A thick spherical pressure vessel of inner radius 150 mm is subjected to maximum an internal...
A thick spherical pressure vessel of inner radius 150 mm is subjected to maximum an internal pressure of 80 MPa. Calculate its wall thickness based upon the (a) principal stress theory, and (b) total strain energy theory. Poisson's ratio = 0-30, yield strength 300 MPa. please answer only if you know correctly.
A hollow, conducting sphere with an outer radius of .250 m and an inner radius of...
A hollow, conducting sphere with an outer radius of .250 m and an inner radius of .200 m has a uniform surface charge density of -6.37 muC/me2.When a charge is now introduced at the center of the cavity inside the sphere, the new charge density on the outside of the sphere is -4.46 muC/me2. What is the charge at the center of the cavity?
A hollow, conducting sphere with an outer radius of 0.240 m and an inner radius of...
A hollow, conducting sphere with an outer radius of 0.240 m and an inner radius of 0.200 m has a uniform surface charge density of +6.37 × 10−6 C/m2. A charge of -0.400 μC is now introduced into the cavity inside the sphere. What is the new charge density on the outside of the sphere? Express your answer with the appropriate units. Calculate the strength of the electric field just outside the sphere. Express your answer with the appropriate units....
A nonconducting spherical shell of inner radius a = 2.00 cm and outer radius b =...
A nonconducting spherical shell of inner radius a = 2.00 cm and outer radius b = 2.40 cm has (within its thickness) a positive volume charge density p = A/r, where A is a constant and r is the distance from the center of the shell. In addition, a small ball of charge q = 4.5 x 10 ^ -14 C is located at the center of that center. Find the total charge of the shell.
A small conducting spherical shell with inner radius a and outer radius b is concentric with...
A small conducting spherical shell with inner radius a and outer radius b is concentric with a larger conducting spherical shell with inner radius c and outer radius d. The inner shell has a total charge of -1q and the outer shell has a total charge of +3q. Select True or False for the following statements. 1. The total charge on the inner surface of the small shell is -4q. 2. The total charge on the outer surface of the...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT