In: Electrical Engineering
Laser
What component would you use to (choose from the list on the following page)
1._______________separate a gas from a vacuum but allow light to travel from one to the other with little or no effect on the light
2._______________direct a beam back in the direction from which it came
3._______________place in a laser cavity to limit output to a single longitudinal mode
4._______________"correct" a beam with an oval cross section, creating a circular cross section
5._______________filter all visible wavelengths by the same amount
6._______________pass only a narrow band of wavelengths in a beam of light
7._______________allow visible light to pass, but reflect IR
8._______________remove optical noise from a beam to produce a smooth, clean spot of light
9._______________prevent reflection from an optical element
10.______________pass all wavelengths except for a narrow band
11.______________create polarized light without the use of a polarizing filter
12.______________reduce or eliminate the divergence of a laser beam
13_______________ create long duration pulses from a cw laser beam
14_______________change the wavelength of light to half its previous value
15_______________change the wavelength of light by scattering in an optical fiber
16_______________divide a beam into two parts
17_______________ create circularly polarized light from linearly polarized light
18_______________ create a short laser pulse with high peak power
19_______________create a train of femtosecond (really, really short) pulses
20_______________rotate the direction of polarization using a voltage controlled device
LIST OF LASER ACCESSORIES
1. Etalon
2. Retroreflector
3. Nd filter
4. Collimator
5. Window
6. narrow band transmission filter
7. Hot mirror
8. Spatial filters
9. Ar coating
10. Notch filter
11. Brewster window
12. Cylindrical lens
13. Mechanical chopper
14. second harmonic generation (SHG) crystal
15. Cascaded raman resonator
16. Beam splitter
17. Retarder
18. Q switch
19. Mode locker
20. Pockels cell