Suppose we coat a glass window (n = 1.5) with a thin coating in order to...

Suppose we coat a glass window (n = 1.5) with a thin coating in order to eliminate the reflection for normal incidence radiation, at a wavelength of 550 nm. Find the reflectance as a function of wavelength.

Expert Solution

In the images below required relation of reflectance as a function of wavelength is obtained, and then finally the thickness and reflectance for given case is obtained...

So please find your answers in the given images (in 4th and 7th image)

Further,

Answer to given condition

genius_generous answered 2 years ago

White light is shone on a very thin layer of glass (n = 1.5), and above...

White light is shone on a very thin layer of glass (n = 1.5), and above the glass layer, interference maxima for two wavelengths (and no other in between) are seen: one green wavelength of 550 nm, and one orange wavelength of 610 nm. What is the thickness of the glass layer? a. 1862 nm b.1859 nm c. 1860 nm d.1861 nm

We wish to coat flat glass (n = 1.50) with a transparent material (n = 1.31)...

We wish to coat flat glass (n = 1.50) with a transparent material (n = 1.31) so that reflection of light at wavelength 500 nm is eliminated by interference. (a) What minimum thickness can the coating have to do this? (b) What is the next thickness for which destructive interference would occur?

calculate the minimum thickness needed for an antireflective coating (n=1.39) applied to a glass lens in...

calculate the minimum thickness needed for an antireflective coating (n=1.39) applied to a glass lens in order to eliminate blue (470nm) reflections for light at normal incidence. calculate the minimum thickness needed for an antireflective coating (n=1.39) applied to a glass lens inorder to eliminate red (695 nm) reflections for light at normal incidence.

A thin film of acetone (n = 1.25) coats a thick glass plate (n = 1.50)....

A thin film of acetone (n = 1.25) coats a thick glass plate (n = 1.50). White light is incident normal to the film. In the reflections, fully destructive interference occurs at 480 nm and fully constructive interference at 560 nm. Calculate the thickness of the acetone film.

20)A thin layer of acetone (nAcetone = 1.25) covers a glass surface (nGlass = 1.5). Whether...

20)A thin layer of acetone (nAcetone = 1.25) covers a glass surface (nGlass = 1.5). Whether Illuminate the layer with white light in the direction perpendicular to the layer, wavelength light 600nm is fully blocked, and light with 700nm wavelength is fully reflected. Which the thickness of the layer? Remember that white light contains all visible colors. (a) 120nm (b) 360nm (c) 840nm (d) 280nm (e) 560nm

A rhinestone is made of glass (n=1.5). To make it more reflective it is coated with...

A rhinestone is made of glass (n=1.5). To make it more reflective it is coated with a layer of SiO (n=2). Find the minimum thickness of the SiO coating to provide strong reflection for 570 nm light at normal incidence.

The block of glass (n = 1.5) shown in cross section in Figure 1 is surrounded...

The block of glass (n = 1.5) shown in cross section in Figure 1 is surrounded by air. A ray of light enters the block at its left-hand face with incident angle θ1 and reemerges into the air from the right-hand face directed parallel to the block's base. Determine the angle θ1.

A thin film of oil (n = 1.4) of thickness 1.4micrometers. is compressed between two glass...

A thin film of oil (n = 1.4) of thickness 1.4micrometers. is compressed between two glass slabs (n = 1.5). White light containing wavelengths from 400 to 700nm (measured in air) is incident normally on the film. In the reflected light, which wavelengths (from long to short)are a) missing (4 of them) and b) enhanced (4 of them)

A uniform thin film of alcohol (n=1.36) lies on a flat glass plate (n=1.56). When monochromatic...

A uniform thin film of alcohol (n=1.36) lies on a flat glass plate (n=1.56). When monochromatic light, whose wavelength can be changed, is incident normally, the reflected light is a minimum for ?=515nm and a maximum for ?=644nm. What is the minimum thickness of the film? tmin = .....?..... nm

Typical glass ca.(n=1.5-1.7) Plastics (n=1.3-1.6) PbO litharge (n=2.67) Diamond (n=2.41) which material has the highest interaction...

Typical glass ca.(n=1.5-1.7) Plastics (n=1.3-1.6) PbO litharge (n=2.67) Diamond (n=2.41) which material has the highest interaction of light? discuss

Question